Hi Tom,
Please find my response inline.
> -----Original Message-----
> From: Tom Rix <trix@xxxxxxxxxx>
> Sent: Wednesday, July 7, 2021 3:04 AM
> To: Nava kishore Manne <navam@xxxxxxxxxx>; robh+dt@xxxxxxxxxx; Michal
> Simek <michals@xxxxxxxxxx>; mdf@xxxxxxxxxx; arnd@xxxxxxxx; Rajan Vaja
> <RAJANV@xxxxxxxxxx>; gregkh@xxxxxxxxxxxxxxxxxxx; Amit Sunil Dhamne
> <amitsuni@xxxxxxxxxxxxxxx>; Tejas Patel <tejasp@xxxxxxxxxxxxxxx>;
> zou_wei@xxxxxxxxxx; Sai Krishna Potthuri <lakshmis@xxxxxxxxxx>; Ravi
> Patel <ravipate@xxxxxxxxxxxxxxx>; iwamatsu@xxxxxxxxxxx; Jiaying Liang
> <jliang@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-
> fpga@xxxxxxxxxxxxxxx; git <git@xxxxxxxxxx>; chinnikishore369@xxxxxxxxx
> Cc: Appana Durga Kedareswara Rao <appanad@xxxxxxxxxx>
> Subject: Re: [PATCH v8 5/5] fpga: versal-fpga: Add versal fpga manager driver
>
>
> On 6/26/21 8:52 AM, Nava kishore Manne wrote:
> > Add support for Xilinx Versal FPGA manager.
> >
> > PDI source type can be DDR, OCM, QSPI flash etc..
> > But driver allocates memory always from DDR, Since driver supports
> > only DDR source type.
> >
> > Signed-off-by: Appana Durga Kedareswara rao
> > <appana.durga.rao@xxxxxxxxxx>
> > Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
> > Reviewed-by: Moritz Fischer <mdf@xxxxxxxxxx>
> > ---
> > Changes for v2:
> > -Updated the Fpga Mgr registrations call's
> > to 5.11
> > -Fixed some minor coding issues as suggested by
> > Moritz.
> >
> > Changes for v3:
> > -Rewritten the Versal fpga Kconfig contents.
> >
> > Changes for v4:
> > -Rebased the changes on linux-next.
> > No functional changes.
> >
> > Changes for v5:
> > -None.
> >
> > Changes for v6:
> > -None.
> >
> > Changes for v7:
> > -Updated driver to remove unwated priv struct dependency.
> >
> > Changes for v8:
> > -None.
> >
> > drivers/fpga/Kconfig | 9 ++++
> > drivers/fpga/Makefile | 1 +
> > drivers/fpga/versal-fpga.c | 96
> ++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 106 insertions(+)
> > create mode 100644 drivers/fpga/versal-fpga.c
> >
> > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index
> > 8cd454ee20c0..16793bfc2bb4 100644
> > --- a/drivers/fpga/Kconfig
> > +++ b/drivers/fpga/Kconfig
> > @@ -234,4 +234,13 @@ config FPGA_MGR_ZYNQMP_FPGA
> > to configure the programmable logic(PL) through PS
> > on ZynqMP SoC.
> >
> > +config FPGA_MGR_VERSAL_FPGA
> > + tristate "Xilinx Versal FPGA"
> > + depends on ARCH_ZYNQMP || COMPILE_TEST
> Shouldn't this depend on ZYNQMP_FIRMWARE ?
Yes it has a dependency, will fix
> > + help
> > + Select this option to enable FPGA manager driver support for
> > + Xilinx Versal SoC. This driver uses the firmware interface to
> > + configure the programmable logic(PL).
> > +
> > + To compile this as a module, choose M here.
> > endif # FPGA
> > diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index
> > 18dc9885883a..0bff783d1b61 100644
> > --- a/drivers/fpga/Makefile
> > +++ b/drivers/fpga/Makefile
> > @@ -18,6 +18,7 @@ obj-$(CONFIG_FPGA_MGR_TS73XX) +=
> ts73xx-fpga.o
> > obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
> > obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> > obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
> > +obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA) += versal-fpga.o
> The other CONFIG_FPGA_MGR* configs are alphabetical, versal should
> follow.
Will fix.
> > obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o
> > obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o
> >
> > diff --git a/drivers/fpga/versal-fpga.c b/drivers/fpga/versal-fpga.c
> > new file mode 100644 index 000000000000..1bd312a31b23
> > --- /dev/null
> > +++ b/drivers/fpga/versal-fpga.c
> > @@ -0,0 +1,96 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2019-2021 Xilinx, Inc.
> > + */
> > +
> > +#include <linux/dma-mapping.h>
> > +#include <linux/fpga/fpga-mgr.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/string.h>
> > +#include <linux/firmware/xlnx-zynqmp.h>
> > +
> > +static int versal_fpga_ops_write_init(struct fpga_manager *mgr,
> > + struct fpga_image_info *info,
> > + const char *buf, size_t size) {
> > + return 0;
> > +}
> > +
> These empty ops should go away with my wrappers patchset
Once your patches got integrated will post one more patch to remove this empty ops.
> > +static int versal_fpga_ops_write(struct fpga_manager *mgr,
> > + const char *buf, size_t size)
> > +{
> > + dma_addr_t dma_addr = 0;
> > + char *kbuf;
> > + int ret;
> > +
> > + kbuf = dma_alloc_coherent(mgr->dev.parent, size, &dma_addr,
> GFP_KERNEL);
> > + if (!kbuf)
> > + return -ENOMEM;
> > +
> > + memcpy(kbuf, buf, size);
> > + ret = zynqmp_pm_load_pdi(PDI_SRC_DDR, dma_addr);
> why isn't the size passed ?
Size is part of PDI images header users no need to pass this info explicitly.
> > + dma_free_coherent(mgr->dev.parent, size, kbuf, dma_addr);
> > +
> > + return ret;
> > +}
> > +
> > +static int versal_fpga_ops_write_complete(struct fpga_manager *mgr,
> > + struct fpga_image_info *info)
> > +{
> > + return 0;
> > +}
> > +
> > +static enum fpga_mgr_states versal_fpga_ops_state(struct fpga_manager
> > +*mgr) {
> > + return FPGA_MGR_STATE_UNKNOWN;
> > +}
> > +
> > +static const struct fpga_manager_ops versal_fpga_ops = {
> > + .state = versal_fpga_ops_state,
> > + .write_init = versal_fpga_ops_write_init,
> > + .write = versal_fpga_ops_write,
> > + .write_complete = versal_fpga_ops_write_complete, };
> > +
> > +static int versal_fpga_probe(struct platform_device *pdev) {
> > + struct device *dev = &pdev->dev;
> > + struct fpga_manager *mgr;
> > + int ret;
> > +
> > + ret = dma_set_mask_and_coherent(&pdev->dev,
> DMA_BIT_MASK(32));
> > + if (ret < 0) {
> > + dev_err(dev, "no usable DMA configuration\n");
> > + return ret;
> > + }
> > +
> > + mgr = devm_fpga_mgr_create(dev, "Xilinx Versal FPGA Manager",
> > + &versal_fpga_ops, NULL);
> > + if (!mgr)
> > + return -ENOMEM;
> > +
> > + return devm_fpga_mgr_register(dev, mgr); }
> > +
> > +static const struct of_device_id versal_fpga_of_match[] = {
> > + { .compatible = "xlnx,versal-fpga", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, versal_fpga_of_match);
> needs #if defined(CONFIG_OF) wrapper
Will fix.
> > +
> > +static struct platform_driver versal_fpga_driver = {
> > + .probe = versal_fpga_probe,
> > + .driver = {
> > + .name = "versal_fpga_manager",
> > + .of_match_table = of_match_ptr(versal_fpga_of_match),
> > + },
> > +};
> > +module_platform_driver(versal_fpga_driver);
> > +
> > +MODULE_AUTHOR("Nava kishore Manne <nava.manne@xxxxxxxxxx>");
> > +MODULE_AUTHOR("Appana Durga Kedareswara rao
> > +<appanad.durga.rao@xxxxxxxxxx>");
>
> Rao - needs to be capitalized ?
>
Will fix.
