Add "fpga-config-from-dmabuf" property to allow the bitstream configuration from pre-allocated dma-buffer. Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx> --- Documentation/devicetree/bindings/fpga/fpga-region.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt index 969ca53bb65e..c573cf258d60 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.txt +++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt @@ -177,6 +177,8 @@ Optional properties: it indicates that the FPGA has already been programmed with this image. If this property is in an overlay targeting a FPGA region, it is a request to program the FPGA with that image. +- fpga-config-from-dmabuf : boolean, set if the FPGA configured done from the + pre-allocated dma-buffer. - fpga-bridges : should contain a list of phandles to FPGA Bridges that must be controlled during FPGA programming along with the parent FPGA bridge. This property is optional if the FPGA Manager handles the bridges. -- 2.18.0
