Doc suggestions:
On 1/19/21 6:43 PM, Xu Yilun wrote:
> This patch adds description for UIO support for dfl devices on DFL
> bus.
>
> Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
> ---
> v2: no doc in v1, add it for v2.
> v3: some documentation fixes.
> v4: documentation change since the driver matching is changed.
> v5: no change.
> v6: improve the title of the userspace driver support section.
> some word improvement.
> v7: rebased to next-20210119
> ---
> Documentation/fpga/dfl.rst | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
> index c41ac76..f96a6fb 100644
> --- a/Documentation/fpga/dfl.rst
> +++ b/Documentation/fpga/dfl.rst
> @@ -7,6 +7,7 @@ Authors:
> - Enno Luebbers <enno.luebbers@xxxxxxxxx>
> - Xiao Guangrong <guangrong.xiao@xxxxxxxxxxxxxxx>
> - Wu Hao <hao.wu@xxxxxxxxx>
> +- Xu Yilun <yilun.xu@xxxxxxxxx>
>
> The Device Feature List (DFL) FPGA framework (and drivers according to
> this framework) hides the very details of low layer hardwares and provides
> @@ -530,6 +531,30 @@ Being able to specify more than one DFL per BAR has been considered, but it
> was determined the use case did not provide value. Specifying a single DFL
> per BAR simplifies the implementation and allows for extra error checking.
>
> +
> +Userspace driver support for DFL devices
> +========================================
> +The purpose of an FPGA is to be reprogrammed with newly developed hardware
> +components. New hardware can instantiate a new private feature in the DFL, and
> +then get a DFL device in their system. In some cases users may need a userspace
then present a DFL device in the system.
> +driver for the DFL device:
> +
> +* Users may need to run some diagnostic test for their hardwares.
hardware.
> +* Users may prototype the kernel driver in user space.
> +* Some hardware is designed for specific purposes and does not fit into one of
> + the standard kernel subsystems.
> +
> +This requires direct access to MMIO space and interrupt handling from
> +userspace. The dfl-uio-pdev module exposes the UIO device interfaces for this
> +purpose. It adds the uio_pdrv_genirq platform device with the resources of
> +the DFL feature, and lets the generic UIO platform device driver provide UIO
> +support to userspace.
> +
> +FPGA_DFL_UIO_PDEV should be selected to enable the dfl-uio-pdev module driver.
> +To support a new DFL feature been directly accessed via UIO, its feature id
To support a new DFL feature via UIO direct access, its feature id
> +should be added to the driver's id_table.
> +
> +
> Open discussion
> ===============
> FME driver exports one ioctl (DFL_FPGA_FME_PORT_PR) for partial reconfiguration
>
HTH.
--
~Randy
"He closes his eyes and drops the goggles. You can't get hurt
by looking at a bitmap. Or can you?"
(Neal Stephenson: Snow Crash)
