On Fri, Dec 18, 2020 at 05:59:17AM -0800, Tom Rix wrote:
>
> On 12/18/20 12:05 AM, Wu, Hao wrote:
> >> Subject: [PATCH v3 2/3] fpga: dfl: add the userspace I/O device support for
> >> DFL devices
> >>
> >> This patch supports the DFL drivers be written in userspace. This is
> >> realized by exposing the userspace I/O device interfaces.
> >>
> >> The driver leverages the uio_pdrv_genirq, it adds the uio_pdrv_genirq
> >> platform device with the DFL device's resources, and let the generic UIO
> >> platform device driver provide support to userspace access to kernel
> >> interrupts and memory locations.
> >>
> >> The driver matches DFL devices in a different way. It has no device id
> >> table, instead it matches any DFL device which could not be handled by
> >> other DFL drivers.
> > Looks like we want to build UIO driver as the default/generic driver for DFL,
I'm not going to make UIO as the default driver for DFL devs, the driver
module will not be autoloaded. I want to provide a choice to operate on
the unhandled devs in userspace. Insmod it if it helps otherwise leave
it.
> > it seems fine but my concern is that UIO has its own limitation, if some day,
> > dfl device is extended, but UIO has limitation, then we may need to select
> > another one as the default driver.. or we can just match them using
I think we may not have to select a "default" driver, if we have a
better way for userspace accessing, we could load that module, leave
UIO.
> > id_table as we know UIO meets the requirement for those DFL devices?
As we discussed, the drawback is that we should always change the code to
support a new dfl device for user accessing. But it is OK to me if the
generic UIO match rule is not considered proper.
>
> When we have multiple defaults, could this be handled in the configury ?
I think we don't have to select a "default".
>
> Tom
>
> >
> >> Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
> >> ---
> >> v2: switch to the new matching algorithem. It matches DFL devices which
> >> could not be handled by other DFL drivers.
> >> refacor the code about device resources filling.
> >> fix some comments.
> >> v3: split the dfl.c changes out of this patch.
> >> some minor fixes
> >> ---
> >> drivers/fpga/Kconfig | 10 ++++
> >> drivers/fpga/Makefile | 1 +
> >> drivers/fpga/dfl-uio-pdev.c | 110
> >> ++++++++++++++++++++++++++++++++++++++++++++
> >> 3 files changed, 121 insertions(+)
> >> create mode 100644 drivers/fpga/dfl-uio-pdev.c
> >>
> >> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> >> index 5d7f0ae..7a88af9 100644
> >> --- a/drivers/fpga/Kconfig
> >> +++ b/drivers/fpga/Kconfig
> >> @@ -202,6 +202,16 @@ config FPGA_DFL_NIOS_INTEL_PAC_N3000
> >> the card. It also instantiates the SPI master (spi-altera) for
> >> the card's BMC (Board Management Controller).
> >>
> >> +config FPGA_DFL_UIO_PDEV
> >> + tristate "FPGA DFL Driver for Userspace I/O platform devices"
> >> + depends on FPGA_DFL && UIO_PDRV_GENIRQ
> >> + help
> >> + Enable this to allow some DFL drivers be written in userspace. It
> >> + adds the uio_pdrv_genirq platform device with the DFL feature's
> >> + resources, and lets the generic UIO platform device driver provide
> >> + support for userspace access to kernel interrupts and memory
> >> + locations.
> > If we consider this as a default driver for everybody in DFL, then we could
> > consider build it into the core, otherwise it always requires to be loaded
> > manually, right?
It should be loaded manually. I don't want to make this as default.
> >
> >> +
> >> config FPGA_DFL_PCI
> >> tristate "FPGA DFL PCIe Device Driver"
> >> depends on PCI && FPGA_DFL
> >> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> >> index 18dc9885..8847fe0 100644
> >> --- a/drivers/fpga/Makefile
> >> +++ b/drivers/fpga/Makefile
> >> @@ -45,6 +45,7 @@ dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-
> >> dma-region.o
> >> dfl-afu-objs += dfl-afu-error.o
> >>
> >> obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o
> >> +obj-$(CONFIG_FPGA_DFL_UIO_PDEV) += dfl-uio-pdev.o
> >>
> >> # Drivers for FPGAs which implement DFL
> >> obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o
> >> diff --git a/drivers/fpga/dfl-uio-pdev.c b/drivers/fpga/dfl-uio-pdev.c
> >> new file mode 100644
> >> index 0000000..8c57233
> >> --- /dev/null
> >> +++ b/drivers/fpga/dfl-uio-pdev.c
> >> @@ -0,0 +1,110 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * DFL driver for Userspace I/O platform devices
> >> + *
> >> + * Copyright (C) 2020 Intel Corporation, Inc.
> >> + */
> >> +#include <linux/dfl.h>
> >> +#include <linux/errno.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/module.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/slab.h>
> >> +#include <linux/uio_driver.h>
> >> +
> >> +#include "dfl.h"
> >> +
> >> +#define DRIVER_NAME "dfl-uio-pdev"
> >> +
> >> +static struct dfl_driver dfl_uio_pdev_driver;
> >> +
> >> +static int check_for_other_drv_match(struct device_driver *drv, void *data)
> >> +{
> >> + struct dfl_driver *ddrv = to_dfl_drv(drv);
> >> + struct dfl_device *ddev = data;
> >> +
> >> + /* skip myself */
> >> + if (ddrv == &dfl_uio_pdev_driver)
> >> + return 0;
> >> +
> >> + return dfl_match_device(ddev, ddrv);
> >> +}
> >> +
> >> +static int dfl_uio_pdev_match(struct dfl_device *ddev)
> >> +{
> >> + /*
> >> + * If any other driver wants the device, leave the device to this other
> >> + * driver.
> >> + */
> >> + if (bus_for_each_drv(&dfl_bus_type, NULL, ddev,
> >> check_for_other_drv_match))
> >> + return 0;
> >> +
> >> + return 1;
> >> +}
> >> +
> >> +static int dfl_uio_pdev_probe(struct dfl_device *ddev)
> >> +{
> >> + struct device *dev = &ddev->dev;
> >> + struct platform_device_info pdevinfo = { 0 };
> >> + struct uio_info uio_pdata = { 0 };
> >> + struct platform_device *uio_pdev;
> >> + struct resource *res;
> >> + int i;
> >> +
> >> + pdevinfo.name = "uio_pdrv_genirq";
> >> +
> >> + res = kcalloc(ddev->num_irqs + 1, sizeof(*res), GFP_KERNEL);
> >> + if (!res)
> >> + return -ENOMEM;
> >> +
> >> + res[0].parent = &ddev->mmio_res;
> >> + res[0].flags = IORESOURCE_MEM;
> >> + res[0].start = ddev->mmio_res.start;
> >> + res[0].end = ddev->mmio_res.end;
> >> +
> >> + /* then add irq resource */
> >> + for (i = 0; i < ddev->num_irqs; i++) {
> >> + res[i + 1].flags = IORESOURCE_IRQ;
> >> + res[i + 1].start = ddev->irqs[i];
> >> + res[i + 1].end = ddev->irqs[i];
> >> + }
> > How many interrupts UIO could support? or we need some
> > warning or just even return error here?
Yes, I can add some warning here.
Thanks,
Yilun
