On 10/2/20 6:24 PM, Russ Weight wrote:
> Add macros and definitions required by the MAX10 BMC
> Security Engine driver.
>
> Signed-off-by: Russ Weight <russell.h.weight@xxxxxxxxx>
> ---
> v2:
> - These functions and macros were previously distributed among
> the patches that needed them. They are now grouped together
> in a single patch containing changes to the Intel MAX10 BMC
> driver.
> - Added DRBL_ prefix to some definitions
> - Some address definitions were moved here from the .c files that
> use them.
> ---
> include/linux/mfd/intel-m10-bmc.h | 134 ++++++++++++++++++++++++++++++
> 1 file changed, 134 insertions(+)
>
> diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
> index c8ef2f1654a4..880f907302eb 100644
> --- a/include/linux/mfd/intel-m10-bmc.h
> +++ b/include/linux/mfd/intel-m10-bmc.h
> @@ -13,6 +13,9 @@
> #define M10BMC_SYS_BASE 0x300800
> #define M10BMC_MEM_END 0x200000fc
>
> +#define M10BMC_STAGING_BASE 0x18000000
> +#define M10BMC_STAGING_SIZE 0x3800000
The staging size is not used, please use it in m10bmc_sec_write_blk to
check the input parameter 'size'
> +
> /* Register offset of system registers */
> #define NIOS2_FW_VERSION 0x0
> #define M10BMC_TEST_REG 0x3c
> @@ -21,6 +24,88 @@
> #define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24)
> #define M10BMC_VER_LEGACY_INVALID 0xffffffff
>
> +/* Secure update doorbell register, in system register region */
> +#define M10BMC_DOORBELL 0x400
> +
> +/* Authorization Result register, in system register region */
> +#define M10BMC_AUTH_RESULT 0x404
> +
> +/* Doorbell register fields */
> +#define DRBL_RSU_REQUEST BIT(0)
> +#define DRBL_RSU_PROGRESS GENMASK(7, 4)
> +#define DRBL_HOST_STATUS GENMASK(11, 8)
> +#define DRBL_RSU_STATUS GENMASK(23, 16)
> +#define DRBL_PKVL_EEPROM_LOAD_SEC BIT(24)
> +#define DRBL_PKVL1_POLL_EN BIT(25)
> +#define DRBL_PKVL2_POLL_EN BIT(26)
PKVL seems like it would be n3000 specific.
For this and similar it may be good to add a _N3000_ in the name.
> +#define DRBL_CONFIG_SEL BIT(28)
> +#define DRBL_REBOOT_REQ BIT(29)
> +#define DRBL_REBOOT_DISABLED BIT(30)
> +
> +/* Progress states */
> +#define RSU_PROG_IDLE 0x0
> +#define RSU_PROG_PREPARE 0x1
> +#define RSU_PROG_READY 0x3
> +#define RSU_PROG_AUTHENTICATING 0x4
> +#define RSU_PROG_COPYING 0x5
> +#define RSU_PROG_UPDATE_CANCEL 0x6
> +#define RSU_PROG_PROGRAM_KEY_HASH 0x7
> +#define RSU_PROG_RSU_DONE 0x8
> +#define RSU_PROG_PKVL_PROM_DONE 0x9
> +
> +/* Device and error states */
> +#define RSU_STAT_NORMAL 0x0
> +#define RSU_STAT_TIMEOUT 0x1
> +#define RSU_STAT_AUTH_FAIL 0x2
> +#define RSU_STAT_COPY_FAIL 0x3
> +#define RSU_STAT_FATAL 0x4
> +#define RSU_STAT_PKVL_REJECT 0x5
> +#define RSU_STAT_NON_INC 0x6
> +#define RSU_STAT_ERASE_FAIL 0x7
> +#define RSU_STAT_WEAROUT 0x8
> +#define RSU_STAT_NIOS_OK 0x80
> +#define RSU_STAT_USER_OK 0x81
> +#define RSU_STAT_FACTORY_OK 0x82
> +#define RSU_STAT_USER_FAIL 0x83
> +#define RSU_STAT_FACTORY_FAIL 0x84
> +#define RSU_STAT_NIOS_FLASH_ERR 0x85
> +#define RSU_STAT_FPGA_FLASH_ERR 0x86
> +
> +#define HOST_STATUS_IDLE 0x0
> +#define HOST_STATUS_WRITE_DONE 0x1
> +#define HOST_STATUS_ABORT_RSU 0x2
> +
> +#define rsu_prog(doorbell) FIELD_GET(DRBL_RSU_PROGRESS, doorbell)
> +#define rsu_stat(doorbell) FIELD_GET(DRBL_RSU_STATUS, doorbell)
> +
> +/* interval 100ms and timeout 5s */
> +#define NIOS_HANDSHAKE_INTERVAL_US (100 * 1000)
> +#define NIOS_HANDSHAKE_TIMEOUT_US (5 * 1000 * 1000)
> +
> +/* RSU PREP Timeout (2 minutes) to erase flash staging area */
> +#define RSU_PREP_INTERVAL_MS 100
> +#define RSU_PREP_TIMEOUT_MS (2 * 60 * 1000)
> +
> +/* RSU Complete Timeout (40 minutes) for full flash update */
> +#define RSU_COMPLETE_INTERVAL_MS 1000
> +#define RSU_COMPLETE_TIMEOUT_MS (40 * 60 * 1000)
minutes is an unusual timeout unit.
It may be worthwhile to spell out MINUTES to avoid confusing with micro seconds.
Tom
> +
> +/* Addresses for security related data in FLASH */
> +#define BMC_REH_ADDR 0x17ffc004
> +#define BMC_PROG_ADDR 0x17ffc000
> +#define BMC_PROG_MAGIC 0x5746
> +
> +#define SR_REH_ADDR 0x17ffd004
> +#define SR_PROG_ADDR 0x17ffd000
> +#define SR_PROG_MAGIC 0x5253
> +
> +#define PR_REH_ADDR 0x17ffe004
> +#define PR_PROG_ADDR 0x17ffe000
> +#define PR_PROG_MAGIC 0x5250
> +
> +/* Address of inverted bit vector containing user the image FLASH count */
> +#define USER_FLASH_COUNT 0x17ffb000
> +
> /**
> * struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
> * @dev: this device
> @@ -35,7 +120,11 @@ struct intel_m10bmc {
> * register access helper functions.
> *
> * m10bmc_raw_read - read m10bmc register per addr
> + * m10bmc_raw_bulk_read - bulk read max10 registers per addr
> + * m10bmc_raw_bulk_write - bulk write max10 registers per addr
> + * m10bmc_raw_update_bits - update max10 register per addr
> * m10bmc_sys_read - read m10bmc system register per offset
> + * m10bmc_sys_update_bits - update max10 system register per offset
> */
> static inline int
> m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
> @@ -51,6 +140,48 @@ m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
> return ret;
> }
>
> +static inline int
> +m10bmc_raw_bulk_read(struct intel_m10bmc *m10bmc, unsigned int addr,
> + void *val, size_t cnt)
> +{
> + int ret;
> +
> + ret = regmap_bulk_read(m10bmc->regmap, addr, val, cnt);
> + if (ret)
> + dev_err(m10bmc->dev, "fail to read raw reg %x cnt %zx: %d\n",
> + addr, cnt, ret);
> +
> + return ret;
> +}
> +
> +static inline int
> +m10bmc_raw_bulk_write(struct intel_m10bmc *m10bmc, unsigned int addr,
> + void *val, size_t cnt)
> +{
> + int ret;
> +
> + ret = regmap_bulk_write(m10bmc->regmap, addr, val, cnt);
> + if (ret)
> + dev_err(m10bmc->dev, "fail to write raw reg %x cnt %zx: %d\n",
> + addr, cnt, ret);
> +
> + return ret;
> +}
> +
> +static inline int
> +m10bmc_raw_update_bits(struct intel_m10bmc *m10bmc, unsigned int addr,
> + unsigned int msk, unsigned int val)
> +{
> + int ret;
> +
> + ret = regmap_update_bits(m10bmc->regmap, addr, msk, val);
> + if (ret)
> + dev_err(m10bmc->dev, "fail to update raw reg %x: %d\n",
> + addr, ret);
> +
> + return ret;
> +}
> +
> /*
> * The base of the system registers could be configured by HW developers, and
> * in HW SPEC, the base is not added to the addresses of the system registers.
> @@ -62,4 +193,7 @@ m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
> #define m10bmc_sys_read(m10bmc, offset, val) \
> m10bmc_raw_read(m10bmc, M10BMC_SYS_BASE + (offset), val)
>
> +#define m10bmc_sys_update_bits(m10bmc, offset, msk, val) \
> + m10bmc_raw_update_bits(m10bmc, M10BMC_SYS_BASE + (offset), msk, val)
> +
> #endif /* __MFD_INTEL_M10_BMC_H */
