From: Mathias Tausen <mta@xxxxxxxxxxxx> Since axi-clkgen is now supported on ZYNQMP, make sure the max/min frequencies of the PFD and VCO are respected. Signed-off-by: Mathias Tausen <mta@xxxxxxxxxxxx> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- drivers/clk/clk-axi-clkgen.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c index 14d803e6af62..6ffc19e9d850 100644 --- a/drivers/clk/clk-axi-clkgen.c +++ b/drivers/clk/clk-axi-clkgen.c @@ -100,10 +100,17 @@ static uint32_t axi_clkgen_lookup_lock(unsigned int m) return 0x1f1f00fa; } +#ifdef ARCH_ZYNQMP +static const unsigned int fpfd_min = 10000; +static const unsigned int fpfd_max = 450000; +static const unsigned int fvco_min = 800000; +static const unsigned int fvco_max = 1600000; +#else static const unsigned int fpfd_min = 10000; static const unsigned int fpfd_max = 300000; static const unsigned int fvco_min = 600000; static const unsigned int fvco_max = 1200000; +#endif static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout, unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout) -- 2.17.1
