> Subject: [PATCH 1/2] fpga: dfl: map feature mmio resources in their own
> feature drivers
>
> This patch makes preparation for modularization of DFL sub feature
> drivers.
>
> Currently, if we need to support a new DFL sub feature, an entry should
> be added to fme/port_feature_drvs[] in dfl-fme/port-main.c. And we need
> to re-compile the whole DFL modules. That make the DFL drivers hard to be
> extended.
>
> Another consideration is that DFL may contain some IP blocks which are
> already supported by kernel, most of them are supported by platform
> device drivers. We could create platform devices for these IP blocks and
> get them supported by these drivers.
>
> An important issue is that platform device drivers usually requests mmio
> resources on probe. But now dfl mmio is mapped in dfl bus driver (e.g.
> dfl-pci) as a whole region. Then platform device drivers for sub features
> can't request their own mmio resources again. This is what the patch
> trying to resolve.
>
> This patch changes the DFL enumeration. DFL bus driver will unmap mmio
> resources after first step enumeration and pass enumeration info to DFL
> framework. Then DFL framework will map the mmio resources again, do 2nd
> step enumeration, and also unmap the mmio resources. In this way, sub
> feature drivers could then request their own mmio resources as needed.
>
> An exception is that mmio resource of FIU headers are still mapped in dfl
> bus driver. The FIU headers have some fundamental functions (sriov set,
> port enable/disable) needed for dfl bus devices and other sub features.
> They should not be unmapped as long as dfl bus device is alive.
>
> Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
> Signed-off-by: Wu Hao <hao.wu@xxxxxxxxx>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@xxxxxxxxxxxxxxx>
> Signed-off-by: Russ Weight <russell.h.weight@xxxxxxxxx>
> ---
> drivers/fpga/dfl-pci.c | 21 ++++--
> drivers/fpga/dfl.c | 187 +++++++++++++++++++++++++++++++++++-----------
> ---
> drivers/fpga/dfl.h | 6 +-
> 3 files changed, 152 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
> index e220bec..22dc025 100644
> --- a/drivers/fpga/dfl-pci.c
> +++ b/drivers/fpga/dfl-pci.c
> @@ -39,6 +39,11 @@ static void __iomem *cci_pci_ioremap_bar(struct
> pci_dev *pcidev, int bar)
> return pcim_iomap_table(pcidev)[bar];
> }
>
> +static void cci_pci_iounmap_bars(struct pci_dev *pcidev, int mapped_bars)
> +{
> + pcim_iounmap_regions(pcidev, mapped_bars);
> +}
> +
> static int cci_pci_alloc_irq(struct pci_dev *pcidev)
> {
> int ret, nvec = pci_msix_vec_count(pcidev);
> @@ -123,7 +128,7 @@ static int *cci_pci_create_irq_table(struct pci_dev
> *pcidev, unsigned int nvec)
> static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
> {
> struct cci_drvdata *drvdata = pci_get_drvdata(pcidev);
> - int port_num, bar, i, nvec, ret = 0;
> + int port_num, bar, i, nvec, mapped_bars, ret = 0;
> struct dfl_fpga_enum_info *info;
> struct dfl_fpga_cdev *cdev;
> resource_size_t start, len;
> @@ -163,6 +168,8 @@ static int cci_enumerate_feature_devs(struct pci_dev
> *pcidev)
> goto irq_free_exit;
> }
>
> + mapped_bars = BIT(0);
> +
> /*
> * PF device has FME and Ports/AFUs, and VF device only has one
> * Port/AFU. Check them and add related "Device Feature List" info
> @@ -172,7 +179,7 @@ static int cci_enumerate_feature_devs(struct pci_dev
> *pcidev)
> start = pci_resource_start(pcidev, 0);
> len = pci_resource_len(pcidev, 0);
>
> - dfl_fpga_enum_info_add_dfl(info, start, len, base);
> + dfl_fpga_enum_info_add_dfl(info, start, len);
>
> /*
> * find more Device Feature Lists (e.g. Ports) per information
> @@ -200,22 +207,26 @@ static int cci_enumerate_feature_devs(struct
> pci_dev *pcidev)
> if (!base)
> continue;
>
> + mapped_bars |= BIT(bar);
> +
One more place,
As you removed base addr usage below, so ideally we don't need to map
more bars for port here? is my understanding correct?
> start = pci_resource_start(pcidev, bar) + offset;
> len = pci_resource_len(pcidev, bar) - offset;
>
> - dfl_fpga_enum_info_add_dfl(info, start, len,
> - base + offset);
> + dfl_fpga_enum_info_add_dfl(info, start, len);
Thanks
Hao
