Currently the driver does not handle EPROBE_DEFER for the confd gpio. Use devm_gpiod_get_optional() instead of devm_gpiod_get() and return error codes from altera_ps_probe(). Fixes: 5692fae0742d ("fpga manager: Add altera-ps-spi driver for Altera FPGAs") Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx> --- Notes: Compile tested only. I currently don't have hardware to test. I was reviewing the driver prior to a board design and noticed the problem. drivers/fpga/altera-ps-spi.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/fpga/altera-ps-spi.c b/drivers/fpga/altera-ps-spi.c index 678d0115f840..a02b88d63f89 100644 --- a/drivers/fpga/altera-ps-spi.c +++ b/drivers/fpga/altera-ps-spi.c @@ -213,7 +213,7 @@ static int altera_ps_write_complete(struct fpga_manager *mgr, return -EIO; } - if (!IS_ERR(conf->confd)) { + if (conf->confd) { if (!gpiod_get_raw_value_cansleep(conf->confd)) { dev_err(&mgr->dev, "CONF_DONE is inactive!\n"); return -EIO; @@ -292,10 +292,13 @@ static int altera_ps_probe(struct spi_device *spi) return PTR_ERR(conf->status); } - conf->confd = devm_gpiod_get(&spi->dev, "confd", GPIOD_IN); + conf->confd = devm_gpiod_get_optional(&spi->dev, "confd", GPIOD_IN); if (IS_ERR(conf->confd)) { - dev_warn(&spi->dev, "Not using confd gpio: %ld\n", - PTR_ERR(conf->confd)); + dev_err(&spi->dev, "Failed to get confd gpio: %ld\n", + PTR_ERR(conf->confd)); + return PTR_ERR(conf->confd); + } else if (!conf->confd) { + dev_warn(&spi->dev, "Not using confd gpio"); } /* Register manager with unique name */ -- 1.8.3.1