On Fri, Oct 19, 2018 at 3:49 AM Nava kishore Manne
<nava.manne@xxxxxxxxxx> wrote:
Hi Nava,
Just some nits, below.
>
> Add documentation to describe Xilinx ZynqMP fpga driver
> bindings.
>
> Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
> ---
> Changes for v1:
> Created a Seperate(New) DT binding file as
> suggested by Rob.
>
> Changes for RFC-V2:
> -Moved pcap node as a child to firwmare
> node as suggested by Rob.
>
> .../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> new file mode 100644
> index 000000000000..248ff0ee60a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
> @@ -0,0 +1,17 @@
> +--------------------------------------------------------------------------
Please get rid of all these '----' separators (in 4 places).
> +Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
> +using ZynqMP SoC firmware interface
> +--------------------------------------------------------------------------
> +For Bitstream configuration on ZynqMp Soc uses processor configuration
> +port(PCAP) to configure the programmable logic(PL) through PS by using
> +FW interface.
> +
> +Required properties:
> +- compatible: should contain "xlnx,zynqmp-pcap-fpga"
> +
> +-------
> +Example
Nit: please add a colon so 'Example:'
> +-------
> + zynqmp_pcap: pcap {
> + compatible = "xlnx,zynqmp-pcap-fpga";
> + };
> --
> 2.18.0
>
Thanks,
Alan
