This patch adds support for readback of FPGA configuration data and registers.
Usage:
Readback of PL configuration data
cat /sys/kernel/debug/fpga/fpga0/image
Readback of PL configuration registers
cat /sys/kernel/debug/fpga/f8007000.devcfg/cfg_reg
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xxxxxxxxxx>
---
Changes for v4:
--> Improved commit message description as suggested by Moritz.
--> Used GENMASK and BIT() Macros wherever applicable as suggested by Moritz.
--> Fixed commenting sytle issues as suggested by Moritz and Alan.
--> Get rid of the readback_type module param as suggested by Alan and Moritz.
Changes for v3:
--> Added support for pl configuration data readback
--> Improved the pl configuration register readback logic.
Changes for v2:
--> Removed locks from the read_ops as lock handling is done in the framework.
drivers/fpga/zynq-fpga.c | 430 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 430 insertions(+)
diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c
index 70b15b3..1746d18 100644
--- a/drivers/fpga/zynq-fpga.c
+++ b/drivers/fpga/zynq-fpga.c
@@ -31,6 +31,7 @@
#include <linux/regmap.h>
#include <linux/string.h>
#include <linux/scatterlist.h>
+#include <linux/seq_file.h>
/* Offsets into SLCR regmap */
@@ -127,6 +128,69 @@
/* Disable global resets */
#define FPGA_RST_NONE_MASK 0x0
+/**
+ * struct zynq_configreg - Configuration register offsets
+ * @reg: Name of the configuration register.
+ * @offset: Register offset.
+ */
+struct zynq_configreg {
+ char *reg;
+ u32 offset;
+};
+
+static struct zynq_configreg cfgreg[] = {
+ {.reg = "CRC", .offset = 0},
+ {.reg = "FAR", .offset = 1},
+ {.reg = "FDRI", .offset = 2},
+ {.reg = "FDRO", .offset = 3},
+ {.reg = "CMD", .offset = 4},
+ {.reg = "CTRL0", .offset = 5},
+ {.reg = "MASK", .offset = 6},
+ {.reg = "STAT", .offset = 7},
+ {.reg = "LOUT", .offset = 8},
+ {.reg = "COR0", .offset = 9},
+ {.reg = "MFWR", .offset = 10},
+ {.reg = "CBC", .offset = 11},
+ {.reg = "IDCODE", .offset = 12},
+ {.reg = "AXSS", .offset = 13},
+ {.reg = "COR1", .offset = 14},
+ {.reg = "WBSTR", .offset = 16},
+ {.reg = "TIMER", .offset = 17},
+ {.reg = "BOOTSTS", .offset = 22},
+ {.reg = "CTRL1", .offset = 24},
+ {}
+};
+
+/* Masks for Configuration registers */
+#define FAR_ADDR_MASK 0x00000000
+#define RCFG_CMD_MASK BIT(2)
+#define START_CMD_MASK BIT(2) + BIT(0)
+#define RCRC_CMD_MASK GENMASK(2, 0)
+#define SHUTDOWN_CMD_MASK GENMASK(1, 0) + BIT(3)
+#define DESYNC_WORD_MASK GENMASK(2, 3) + BIT(0)
+#define BUSWIDTH_SYNCWORD_MASK 0x000000BB
+#define NOOP_WORD_MASK BIT(29)
+#define BUSWIDTH_DETECT_MASK 0x11220044
+#define SYNC_WORD_MASK 0xAA995566
+#define DUMMY_WORD_MASK GENMASK(31, 0)
+
+#define TYPE_HDR_SHIFT 29
+#define TYPE_REG_SHIFT 13
+#define TYPE_OP_SHIFT 27
+#define TYPE_OPCODE_NOOP 0
+#define TYPE_OPCODE_READ 1
+#define TYPE_OPCODE_WRITE 2
+#define TYPE_FAR_OFFSET 1
+#define TYPE_FDRO_OFFSET 3
+#define TYPE_CMD_OFFSET 4
+
+#define READ_STEP5_NOOPS 6
+#define READ_STEP9_NOOPS 32
+
+#define READ_DMA_SIZE 0x200
+#define DUMMY_FRAMES_SIZE 0x28
+#define SLCR_PCAP_FREQ 10000000
+
struct zynq_fpga_priv {
int irq;
struct clk *clk;
@@ -140,6 +204,11 @@ struct zynq_fpga_priv {
struct scatterlist *cur_sg;
struct completion dma_done;
+#ifdef CONFIG_FPGA_MGR_DEBUG_FS
+ struct mutex ref_mutex;
+ struct dentry *dir;
+#endif
+ u32 size;
};
static inline void zynq_fpga_write(struct zynq_fpga_priv *priv, u32 offset,
@@ -164,6 +233,27 @@ static inline void zynq_fpga_set_irq(struct zynq_fpga_priv *priv, u32 enable)
zynq_fpga_write(priv, INT_MASK_OFFSET, ~enable);
}
+static void zynq_fpga_dma_xfer(struct zynq_fpga_priv *priv, u32 srcaddr,
+ u32 srclen, u32 dstaddr, u32 dstlen)
+{
+ zynq_fpga_write(priv, DMA_SRC_ADDR_OFFSET, srcaddr);
+ zynq_fpga_write(priv, DMA_DST_ADDR_OFFSET, dstaddr);
+ zynq_fpga_write(priv, DMA_SRC_LEN_OFFSET, srclen);
+ zynq_fpga_write(priv, DMA_DEST_LEN_OFFSET, dstlen);
+}
+
+static int zynq_fpga_wait_fordone(struct zynq_fpga_priv *priv)
+{
+ u32 status;
+ int ret;
+
+ ret = zynq_fpga_poll_timeout(priv, INT_STS_OFFSET, status,
+ status & IXR_D_P_DONE_MASK,
+ INIT_POLL_DELAY,
+ INIT_POLL_TIMEOUT);
+ return ret;
+}
+
/* Must be called with dma_lock held */
static void zynq_step_dma(struct zynq_fpga_priv *priv)
{
@@ -192,6 +282,7 @@ static void zynq_step_dma(struct zynq_fpga_priv *priv)
priv->dma_elm++;
}
+ priv->size += len;
zynq_fpga_write(priv, DMA_SRC_ADDR_OFFSET, addr);
zynq_fpga_write(priv, DMA_DST_ADDR_OFFSET, DMA_INVALID_ADDRESS);
zynq_fpga_write(priv, DMA_SRC_LEN_OFFSET, len / 4);
@@ -401,6 +492,7 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
int i;
priv = mgr->priv;
+ priv->size = 0;
/* The hardware can only DMA multiples of 4 bytes, and it requires the
* starting addresses to be aligned to 64 bits (UG585 pg 212).
@@ -546,12 +638,327 @@ static enum fpga_mgr_states zynq_fpga_ops_state(struct fpga_manager *mgr)
return FPGA_MGR_STATE_UNKNOWN;
}
+static int zynq_type1_pkt(u8 reg, u8 opcode, u16 size)
+{
+ /*
+ * Type 1 Packet Header Format
+ * The header section is always a 32-bit word.
+ *
+ * HeaderType | Opcode | Register Address | Reserved | Word Count
+ * [31:29] [28:27] [26:13] [12:11] [10:0]
+ * --------------------------------------------------------------
+ * 001 xx RRRRRRRRRxxxxx RR xxxxxxxxxxx
+ *
+ * @R: means the bit is not used and reserved for future use.
+ * The reserved bits should be written as 0s.
+ *
+ * Generating the Type 1 packet header which involves shifting of Type1
+ * Header Mask, Register value and the OpCode which is 01 in this case
+ * as only read operation is to be carried out and then performing OR
+ * operation with the Word Length.
+ * For more details refer ug470 Packet Types section Table 5-20.
+ */
+ return (((1 << TYPE_HDR_SHIFT) |
+ (reg << TYPE_REG_SHIFT) |
+ (opcode << TYPE_OP_SHIFT)) | size);
+
+}
+
+static int zynq_type2_pkt(u8 opcode, u32 size)
+{
+ /*
+ * Type 2 Packet Header Format
+ * The header section is always a 32-bit word.
+ *
+ * HeaderType | Opcode | Word Count
+ * [31:29] [28:27] [26:0]
+ * --------------------------------------------------------------
+ * 010 xx xxxxxxxxxxxxx
+ *
+ * @R: means the bit is not used and reserved for future use.
+ * The reserved bits should be written as 0s.
+ *
+ * Generating the Type 2 packet header which involves shifting of Type 2
+ * Header Mask, OpCode and then performing OR operation with the Word
+ * Length. For more details refer ug470 Packet Types section
+ * Table 5-22.
+ */
+ return (((2 << TYPE_HDR_SHIFT) |
+ (opcode << TYPE_OP_SHIFT)) | size);
+}
+
+static int zynq_fpga_ops_read_image(struct fpga_manager *mgr,
+ struct seq_file *s)
+{
+ struct zynq_fpga_priv *priv = mgr->priv;
+ int ret = 0, cmdindex, clk_rate;
+ u32 intr_status, status, i;
+ dma_addr_t dma_addr;
+ unsigned int *buf;
+ size_t size;
+
+ ret = clk_enable(priv->clk);
+ if (ret)
+ return ret;
+
+ size = priv->size + READ_DMA_SIZE + DUMMY_FRAMES_SIZE;
+ buf = dma_zalloc_coherent(mgr->dev.parent, size,
+ &dma_addr, GFP_KERNEL);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto disable_clk;
+ }
+
+ seq_puts(s, "Zynq FPGA Configuration data contents are\n");
+
+ /*
+ * There is no h/w flow control for pcap read
+ * to prevent the FIFO from over flowing, reduce
+ * the PCAP operating frequency.
+ */
+ clk_rate = clk_get_rate(priv->clk);
+ ret = clk_set_rate(priv->clk, SLCR_PCAP_FREQ);
+ if (ret) {
+ dev_err(&mgr->dev, "Unable to reduce the PCAP freq\n");
+ goto free_dmabuf;
+ }
+
+ ret = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
+ status & STATUS_PCFG_INIT_MASK,
+ INIT_POLL_DELAY,
+ INIT_POLL_TIMEOUT);
+ if (ret) {
+ dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
+ goto restore_pcap_clk;
+ }
+
+ cmdindex = 0;
+ buf[cmdindex++] = DUMMY_WORD_MASK;
+ buf[cmdindex++] = BUSWIDTH_SYNCWORD_MASK;
+ buf[cmdindex++] = BUSWIDTH_DETECT_MASK;
+ buf[cmdindex++] = DUMMY_WORD_MASK;
+ buf[cmdindex++] = SYNC_WORD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = zynq_type1_pkt(TYPE_CMD_OFFSET, TYPE_OPCODE_WRITE,
+ 1);
+ buf[cmdindex++] = SHUTDOWN_CMD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = zynq_type1_pkt(TYPE_CMD_OFFSET, TYPE_OPCODE_WRITE,
+ 1);
+ buf[cmdindex++] = RCRC_CMD_MASK;
+ for (i = 0; i < READ_STEP5_NOOPS; i++)
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = zynq_type1_pkt(TYPE_CMD_OFFSET, TYPE_OPCODE_WRITE,
+ 1);
+ buf[cmdindex++] = RCFG_CMD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = zynq_type1_pkt(TYPE_FAR_OFFSET, TYPE_OPCODE_WRITE,
+ 1);
+ buf[cmdindex++] = FAR_ADDR_MASK;
+ buf[cmdindex++] = zynq_type1_pkt(TYPE_FDRO_OFFSET, TYPE_OPCODE_READ,
+ 0);
+ buf[cmdindex++] = zynq_type2_pkt(TYPE_OPCODE_READ, priv->size/4);
+ for (i = 0; i < READ_STEP9_NOOPS; i++)
+ buf[cmdindex++] = NOOP_WORD_MASK;
+
+ intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
+ zynq_fpga_write(priv, INT_STS_OFFSET, intr_status);
+
+ /* Write to PCAP */
+ zynq_fpga_dma_xfer(priv, dma_addr, cmdindex,
+ DMA_INVALID_ADDRESS, 0);
+ ret = zynq_fpga_wait_fordone(priv);
+ if (ret) {
+ dev_err(&mgr->dev, "SRCDMA: Timeout waiting for D_P_DONE\n");
+ goto restore_pcap_clk;
+ }
+ intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
+ zynq_fpga_write(priv, INT_STS_OFFSET, intr_status);
+
+ /* Read From PACP */
+ zynq_fpga_dma_xfer(priv, DMA_INVALID_ADDRESS, 0,
+ dma_addr + READ_DMA_SIZE, priv->size/4);
+ ret = zynq_fpga_wait_fordone(priv);
+ if (ret) {
+ dev_err(&mgr->dev, "DSTDMA: Timeout waiting for D_P_DONE\n");
+ goto restore_pcap_clk;
+ }
+ intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
+ zynq_fpga_write(priv, INT_STS_OFFSET, intr_status);
+
+ /* Write to PCAP */
+ cmdindex = 0;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = zynq_type1_pkt(TYPE_CMD_OFFSET,
+ TYPE_OPCODE_WRITE, 1);
+ buf[cmdindex++] = START_CMD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+
+ buf[cmdindex++] = zynq_type1_pkt(TYPE_CMD_OFFSET,
+ TYPE_OPCODE_WRITE, 1);
+ buf[cmdindex++] = RCRC_CMD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = zynq_type1_pkt(TYPE_CMD_OFFSET,
+ TYPE_OPCODE_WRITE, 1);
+ buf[cmdindex++] = DESYNC_WORD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+
+ zynq_fpga_dma_xfer(priv, dma_addr, cmdindex,
+ DMA_INVALID_ADDRESS, 0);
+ ret = zynq_fpga_wait_fordone(priv);
+ if (ret) {
+ dev_err(&mgr->dev, "SRCDMA1: Timeout waiting for D_P_DONE\n");
+ goto restore_pcap_clk;
+ }
+
+ seq_write(s, &buf[READ_DMA_SIZE/4], priv->size);
+
+restore_pcap_clk:
+ clk_set_rate(priv->clk, clk_rate);
+free_dmabuf:
+ dma_free_coherent(mgr->dev.parent, size, buf,
+ dma_addr);
+disable_clk:
+ clk_disable(priv->clk);
+ return ret;
+}
+
+#ifdef CONFIG_FPGA_MGR_DEBUG_FS
+#include <linux/debugfs.h>
+
+static int zynq_fpga_getconfigreg(struct fpga_manager *mgr, u8 reg,
+ dma_addr_t dma_addr, int *buf)
+{
+ struct zynq_fpga_priv *priv = mgr->priv;
+ int ret = 0, cmdindex, src_dmaoffset;
+ u32 intr_status, status;
+
+ src_dmaoffset = 0x8;
+ cmdindex = 2;
+ buf[cmdindex++] = DUMMY_WORD_MASK;
+ buf[cmdindex++] = BUSWIDTH_SYNCWORD_MASK;
+ buf[cmdindex++] = BUSWIDTH_DETECT_MASK;
+ buf[cmdindex++] = DUMMY_WORD_MASK;
+ buf[cmdindex++] = SYNC_WORD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = zynq_type1_pkt(reg, TYPE_OPCODE_READ, 1);
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+
+ ret = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
+ status & STATUS_PCFG_INIT_MASK,
+ INIT_POLL_DELAY,
+ INIT_POLL_TIMEOUT);
+ if (ret) {
+ dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
+ goto out;
+ }
+
+ /* Write to PCAP */
+ intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
+ zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
+
+ zynq_fpga_dma_xfer(priv, dma_addr + src_dmaoffset, cmdindex,
+ DMA_INVALID_ADDRESS, 0);
+ ret = zynq_fpga_wait_fordone(priv);
+ if (ret) {
+ dev_err(&mgr->dev, "SRCDMA: Timeout waiting for D_P_DONE\n");
+ goto out;
+ }
+ zynq_fpga_set_irq(priv, intr_status);
+
+ /* Read from PACP */
+ zynq_fpga_dma_xfer(priv, DMA_INVALID_ADDRESS, 0, dma_addr, 1);
+ ret = zynq_fpga_wait_fordone(priv);
+ if (ret) {
+ dev_err(&mgr->dev, "DSTDMA: Timeout waiting for D_P_DONE\n");
+ goto out;
+ }
+
+ /* Write to PCAP */
+ cmdindex = 2;
+ buf[cmdindex++] = zynq_type1_pkt(TYPE_CMD_OFFSET,
+ TYPE_OPCODE_WRITE, 1);
+ buf[cmdindex++] = DESYNC_WORD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ buf[cmdindex++] = NOOP_WORD_MASK;
+ zynq_fpga_dma_xfer(priv, dma_addr + src_dmaoffset, cmdindex,
+ DMA_INVALID_ADDRESS, 0);
+ ret = zynq_fpga_wait_fordone(priv);
+ if (ret)
+ dev_err(&mgr->dev, "SRCDMA1: Timeout waiting for D_P_DONE\n");
+out:
+ return ret;
+}
+
+static int zynq_fpga_read_cfg_reg(struct seq_file *s, void *data)
+{
+ struct fpga_manager *mgr = (struct fpga_manager *)s->private;
+ struct zynq_fpga_priv *priv = mgr->priv;
+ struct zynq_configreg *p = cfgreg;
+ dma_addr_t dma_addr;
+ unsigned int *buf;
+ int ret = 0;
+
+ if (!mutex_trylock(&priv->ref_mutex))
+ return -EBUSY;
+
+ if (mgr->state != FPGA_MGR_STATE_OPERATING) {
+ ret = -EPERM;
+ goto err_unlock;
+ }
+
+ ret = clk_enable(priv->clk);
+ if (ret)
+ goto err_unlock;
+
+ buf = dma_zalloc_coherent(mgr->dev.parent, READ_DMA_SIZE,
+ &dma_addr, GFP_KERNEL);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto disable_clk;
+ }
+
+ seq_puts(s, "Zynq FPGA Configuration register contents are\n");
+
+ while (p->reg) {
+ ret = zynq_fpga_getconfigreg(mgr, p->offset, dma_addr, buf);
+ if (ret)
+ goto free_dmabuf;
+ seq_printf(s, "%s --> \t %x \t\r\n", p->reg, buf[0]);
+ p++;
+ }
+
+free_dmabuf:
+ dma_free_coherent(mgr->dev.parent, READ_DMA_SIZE, buf,
+ dma_addr);
+disable_clk:
+ clk_disable(priv->clk);
+err_unlock:
+ mutex_unlock(&priv->ref_mutex);
+ return ret;
+}
+
+static int zynq_fpga_read_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, zynq_fpga_read_cfg_reg, inode->i_private);
+}
+
+static const struct file_operations zynq_fpga_ops_cfg_reg = {
+ .owner = THIS_MODULE,
+ .open = zynq_fpga_read_open,
+ .read = seq_read,
+};
+#endif
+
static const struct fpga_manager_ops zynq_fpga_ops = {
.initial_header_size = 128,
.state = zynq_fpga_ops_state,
.write_init = zynq_fpga_ops_write_init,
.write_sg = zynq_fpga_ops_write,
.write_complete = zynq_fpga_ops_write_complete,
+ .read = zynq_fpga_ops_read_image,
};
static int zynq_fpga_probe(struct platform_device *pdev)
@@ -621,6 +1028,26 @@ static int zynq_fpga_probe(struct platform_device *pdev)
return err;
}
+#ifdef CONFIG_FPGA_MGR_DEBUG_FS
+ struct dentry *d;
+ struct fpga_manager *mgr;
+
+ mgr = platform_get_drvdata(pdev);
+ mutex_init(&priv->ref_mutex);
+
+ d = debugfs_create_dir(pdev->dev.kobj.name, mgr->dir);
+ if (!d)
+ return err;
+
+ priv->dir = d;
+ d = debugfs_create_file("cfg_reg", 0644, priv->dir, mgr,
+ &zynq_fpga_ops_cfg_reg);
+ if (!d) {
+ debugfs_remove_recursive(mgr->dir);
+ return err;
+ }
+#endif
+
return 0;
}
@@ -632,6 +1059,9 @@ static int zynq_fpga_remove(struct platform_device *pdev)
mgr = platform_get_drvdata(pdev);
priv = mgr->priv;
+#ifdef CONFIG_FPGA_MGR_DEBUG_FS
+ debugfs_remove_recursive(priv->dir);
+#endif
fpga_mgr_unregister(&pdev->dev);
clk_unprepare(priv->clk);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-fpga" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
