On Fri, Jan 06, 2023 at 05:48:54PM +0100, Stephen Kitt wrote: > Instead of retrieving the backlight brightness in struct > backlight_properties manually, and then checking whether the backlight > should be on at all, use backlight_get_brightness() which does all > this and insulates this from future changes. > > Signed-off-by: Stephen Kitt <steve@xxxxxxx> Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx> > --- > drivers/video/backlight/ipaq_micro_bl.c | 7 +------ > 1 file changed, 1 insertion(+), 6 deletions(-) > > diff --git a/drivers/video/backlight/ipaq_micro_bl.c b/drivers/video/backlight/ipaq_micro_bl.c > index 85b16cc82878..f595b8c8cbb2 100644 > --- a/drivers/video/backlight/ipaq_micro_bl.c > +++ b/drivers/video/backlight/ipaq_micro_bl.c > @@ -16,17 +16,12 @@ > static int micro_bl_update_status(struct backlight_device *bd) > { > struct ipaq_micro *micro = dev_get_drvdata(&bd->dev); > - int intensity = bd->props.brightness; > + int intensity = backlight_get_brightness(bd); > struct ipaq_micro_msg msg = { > .id = MSG_BACKLIGHT, > .tx_len = 3, > }; > > - if (bd->props.power != FB_BLANK_UNBLANK) > - intensity = 0; > - if (bd->props.state & (BL_CORE_FBBLANK | BL_CORE_SUSPENDED)) > - intensity = 0; > - > /* > * Message format: > * Byte 0: backlight instance (usually 1) > -- > 2.30.2