As all other pieces have been merged into the PWM and fbdev subsystems, we can turn on graphics on the Nomadik NHK15 board. Tested and works like a charm with boot penguin, console if desired and fbsplash. Even blanks the screen properly to save energy. The missing DT bindings should probably have been merged in the fbdev tree, but it doesn't matter where they are merged so I plan to send this whole series as a pull request to ARM SoC. The only non-DT change is the Kconfig change to select MFD_SYSCON. Linus Walleij (6): ARM: dts: add STMPE PWM to the NHK15 device tree dt-bindings: add vendor TPO dt-bindings: Add TPO TPG110 binding ARM: nomadik: select MFD_SYSCON ARM: dts: add PMU to the NHK15 device tree ARM: dts: add the CLCD LCD display to the NHK15 .../bindings/display/panel/tpo,tpg110.txt | 47 +++++++++++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/ste-nomadik-nhk15.dts | 68 ++++++++++++++++++++++ arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 28 +++++++++ arch/arm/mach-nomadik/Kconfig | 1 + 5 files changed, 145 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
