We need to mask all registers of the Integrator/CP core module
control register, and actually write the calculated value to the
control register, not the mask.
Tested on the Integrator/CP with RGB5551 VGA and works like a
charm after this patch.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/video/fbdev/amba-clcd-versatile.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/amba-clcd-versatile.c b/drivers/video/fbdev/amba-clcd-versatile.c
index 9a90817b1550..5c1e03928d7f 100644
--- a/drivers/video/fbdev/amba-clcd-versatile.c
+++ b/drivers/video/fbdev/amba-clcd-versatile.c
@@ -262,7 +262,10 @@ static const struct of_device_id versatile_clcd_of_match[] = {
/* 0 = 24bit VGA, 1 = 18bit VGA */
#define INTEGRATOR_CLCD_LCD_N24BITEN BIT(19)
-#define INTEGRATOR_CLCD_MASK (INTEGRATOR_CLCD_LCDMUX_MASK | \
+#define INTEGRATOR_CLCD_MASK (INTEGRATOR_CLCD_LCDBIASEN | \
+ INTEGRATOR_CLCD_LCDBIASUP | \
+ INTEGRATOR_CLCD_LCDBIASDN | \
+ INTEGRATOR_CLCD_LCDMUX_MASK | \
INTEGRATOR_CLCD_LCD0_EN | \
INTEGRATOR_CLCD_LCD1_EN | \
INTEGRATOR_CLCD_LCD_STATIC1 | \
@@ -277,6 +280,7 @@ static void integrator_clcd_enable(struct clcd_fb *fb)
dev_info(&fb->dev->dev, "enable Integrator CLCD connectors\n");
+ /* FIXME: really needed? */
val = INTEGRATOR_CLCD_LCD_STATIC1 | INTEGRATOR_CLCD_LCD_STATIC2 |
INTEGRATOR_CLCD_LCD0_EN | INTEGRATOR_CLCD_LCD1_EN;
if (var->bits_per_pixel <= 8 ||
@@ -291,8 +295,8 @@ static void integrator_clcd_enable(struct clcd_fb *fb)
regmap_update_bits(versatile_syscon_map,
INTEGRATOR_HDR_CTRL_OFFSET,
- 0,
- INTEGRATOR_CLCD_MASK);
+ INTEGRATOR_CLCD_MASK,
+ val);
}
/*
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
