On Fri, Jun 10, 2016 at 12:39 PM, Brian Norris <briannorris@xxxxxxxxxxxx> wrote:
>
> The LP8556 datasheet describes an EN/VDDIO input, which serves "both as
> a chip enable and as a power supply reference for PWM, SDA, and SCL
> inputs." The LP8556 that I'm testing doesn't respond properly if I try
> to talk I2C to it too quickly after enabling VDDIO, and the LP8555
> datasheet mentions a t_RESPONSE delay of up to 1 millisecond.
>
> Support this EN/VDDIO by adding a regulator property to the binding;
> enabling this regulator at probe time; and sleeping for 1 to 2ms, if the
> EN/VDDIO regulator was provided.
>
> Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> ---
> v2: s/TS8555/LP8555/ in comment (typo)
>
> .../devicetree/bindings/leds/backlight/lp855x.txt | 2 ++
> drivers/video/backlight/lp855x_bl.c | 29 ++++++++++++++++++++++
> 2 files changed, 31 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
> index 0a3ecbc3a1b9..88f56641fc28 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
> +++ b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
> @@ -13,6 +13,7 @@ Optional properties:
> - rom-addr: Register address of ROM area to be updated (u8)
> - rom-val: Register value to be updated (u8)
> - power-supply: Regulator which controls the 3V rail
> + - enable-supply: Regulator which controls the EN/VDDIO input
>
> Example:
>
> @@ -57,6 +58,7 @@ Example:
> backlight@2c {
> compatible = "ti,lp8557";
> reg = <0x2c>;
> + enable-supply = <&backlight_vddio>;
> power-supply = <&backlight_vdd>;
>
> dev-ctrl = /bits/ 8 <0x41>;
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index e5b14f52628f..939f057836e1 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -13,6 +13,7 @@
> #include <linux/slab.h>
> #include <linux/i2c.h>
> #include <linux/backlight.h>
> +#include <linux/delay.h>
> #include <linux/err.h>
> #include <linux/of.h>
> #include <linux/platform_data/lp855x.h>
> @@ -74,6 +75,7 @@ struct lp855x {
> struct lp855x_platform_data *pdata;
> struct pwm_device *pwm;
> struct regulator *supply; /* regulator for VDD input */
> + struct regulator *enable; /* regulator for EN/VDDIO input */
> };
>
> static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
> @@ -433,6 +435,19 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> lp->supply = NULL;
> }
>
> + lp->enable = devm_regulator_get_optional(lp->dev, "enable");
> + if (IS_ERR(lp->enable)) {
> + ret = PTR_ERR(lp->enable);
> + if (ret == -ENODEV) {
> + lp->enable = NULL;
> + } else {
> + if (ret != -EPROBE_DEFER)
> + dev_err(lp->dev, "error getting enable regulator: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> if (lp->supply) {
> ret = regulator_enable(lp->supply);
> if (ret < 0) {
> @@ -441,6 +456,20 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> }
> }
>
> + if (lp->enable) {
> + ret = regulator_enable(lp->enable);
> + if (ret < 0) {
> + dev_err(lp->dev, "failed to enable vddio: %d\n", ret);
> + return ret;
> + }
> +
> + /*
> + * LP8555 datasheet says t_RESPONSE (time between VDDIO and
> + * I2C) is 1ms.
> + */
> + usleep_range(1000, 2000);
> + }
> +
> i2c_set_clientdata(cl, lp);
>
> ret = lp855x_configure(lp);
> --
> 2.8.0.rc3.226.g39d4020
>
Reviewed-by: Stephen Barber <smbarber@xxxxxxxxxxxx>
Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
