Am Freitag, den 16.10.2015, 09:37 +0800 schrieb YH Huang:
> In order to match the panel power sequence, disable the enable_gpio
> in the probe function. Also, reorder the code in the power_on and
> power_off function to match the timing.
>
You aren't specifying which panels power sequence you are matching here.
Are you sure you aren't breaking other panels with this patch?
Regards,
Lucas
> Signed-off-by: YH Huang <yh.huang@xxxxxxxxxxxx>
> ---
> drivers/video/backlight/pwm_bl.c | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> index eff379b..99eca1e 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -54,10 +54,11 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)
> if (err < 0)
> dev_err(pb->dev, "failed to enable power supply\n");
>
> + pwm_enable(pb->pwm);
> +
> if (pb->enable_gpio)
> gpiod_set_value(pb->enable_gpio, 1);
>
> - pwm_enable(pb->pwm);
> pb->enabled = true;
> }
>
> @@ -66,12 +67,12 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
> if (!pb->enabled)
> return;
>
> - pwm_config(pb->pwm, 0, pb->period);
> - pwm_disable(pb->pwm);
> -
> if (pb->enable_gpio)
> gpiod_set_value(pb->enable_gpio, 0);
>
> + pwm_config(pb->pwm, 0, pb->period);
> + pwm_disable(pb->pwm);
> +
> regulator_disable(pb->power_supply);
> pb->enabled = false;
> }
> @@ -241,8 +242,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
> pb->dev = &pdev->dev;
> pb->enabled = false;
>
> - pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
> - GPIOD_OUT_HIGH);
> + pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable");
> if (IS_ERR(pb->enable_gpio)) {
> ret = PTR_ERR(pb->enable_gpio);
> goto err_alloc;
> @@ -264,6 +264,9 @@ static int pwm_backlight_probe(struct platform_device *pdev)
> pb->enable_gpio = gpio_to_desc(data->enable_gpio);
> }
>
> + if (pb->enable_gpio)
> + gpiod_direction_output(pb->enable_gpio, 0);
> +
> pb->power_supply = devm_regulator_get(&pdev->dev, "power");
> if (IS_ERR(pb->power_supply)) {
> ret = PTR_ERR(pb->power_supply);
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
