Re: [PATCH 1/2] OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26/08/15 16:11, Jyri Sarha wrote:

> diff --git a/drivers/video/fbdev/omap2/dss/hdmi5.c b/drivers/video/fbdev/omap2/dss/hdmi5.c
> index 7f87578..f352c4b 100644
> --- a/drivers/video/fbdev/omap2/dss/hdmi5.c
> +++ b/drivers/video/fbdev/omap2/dss/hdmi5.c
> @@ -352,6 +352,7 @@ static int read_edid(u8 *buf, int len)
>  static int hdmi_display_enable(struct omap_dss_device *dssdev)
>  {
>  	struct omap_dss_device *out = &hdmi.output;
> +	unsigned long flags;
>  	int r = 0;
>  
>  	DSSDBG("ENTER hdmi_display_enable\n");
> @@ -370,7 +371,37 @@ static int hdmi_display_enable(struct omap_dss_device *dssdev)
>  		goto err0;
>  	}
>  
> +	if (hdmi.audio_configured) {
> +		spin_lock_irqsave(&hdmi.audio_playing_lock, flags);
> +		hdmi_wp_audio_core_req_enable(&hdmi.wp, false);
> +		hdmi_wp_audio_enable(&hdmi.wp, false);
> +		if (hdmi.wp_idlemode > 0)
> +			REG_FLD_MOD(hdmi.wp.base, HDMI_WP_SYSCONFIG,
> +				    hdmi.wp_idlemode, 3, 2);
> +		hdmi.wp_idlemode = -1;
> +		spin_unlock_irqrestore(&hdmi.audio_playing_lock, flags);

Here I think the audio HW is always disabled already. It has to be,
because the whole HDMI IP has been off. So the above should not be needed.

> +
> +		r = hdmi5_audio_config(&hdmi.core, &hdmi.wp, &hdmi.audio_config,
> +				       hdmi.cfg.timings.pixelclock);
> +		if (r) {
> +			DSSERR("Error restoring audio configuration: %d", r);
> +			hdmi.audio_abort_cb(&hdmi.pdev->dev);
> +			hdmi.audio_configured = false;
> +		}
> +	}
> +
> +	spin_lock_irqsave(&hdmi.audio_playing_lock, flags);
> +	if (hdmi.audio_configured && hdmi.audio_playing) {
> +		/* No-idle while playing audio, store the old value */
> +		hdmi.wp_idlemode =
> +			REG_GET(hdmi.wp.base, HDMI_WP_SYSCONFIG, 3, 2);
> +		REG_FLD_MOD(hdmi.wp.base, HDMI_WP_SYSCONFIG, 1, 3, 2);
> +
> +		hdmi_wp_audio_enable(&hdmi.wp, true);
> +		hdmi_wp_audio_core_req_enable(&hdmi.wp, true);
> +	}
>  	hdmi.display_enabled = true;
> +	spin_unlock_irqrestore(&hdmi.audio_playing_lock, flags);

Maybe you've looked at the locking carefully, but it's not obvious to
me. So is hdmi_audio_start and hdmi_audio_stop the only functions that
are called from atomic context? Every other function is protected with
the mutex?

 Tomi

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Video for Linux]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Tourism]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux