On Tue, Jul 07, 2015 at 05:24:57PM -0700, Luis R. Rodriguez wrote: > On Thu, Jul 2, 2015 at 4:23 PM, Luis R. Rodriguez <mcgrof@xxxxxxxx> wrote: > > On Fri, Jun 26, 2015 at 12:30 AM, Borislav Petkov <bp@xxxxxxx> wrote: > >> On Fri, Jun 26, 2015 at 03:09:27AM +0200, Luis R. Rodriguez wrote: > >>> Sure, mind this as a follow up patch if its too late? > >> > >> No need, you can send me an updated one - I'll replace it. > > > > Will do! > > OK the commend I'm adding: > > @@ -3489,6 +3489,15 @@ static int atyfb_setup_generic(struct pci_dev > *pdev, struct fb_info *info, > > /* Map in frame buffer */ > info->fix.smem_start = addr; > + > + /* > + * The framebuffer is not always 8 MiB that's just the size of the > + * PCI BAR, this is later corrected for use with write-combining > + * helpers with aty_fudge_framebuffer_len() which will adjust the > + * framebuffer accordingly depending on the device. That somehow gives me the impression that aty_fudge_framebuffer_len() changes smem_len to match the framebuffer size, which it does not. Dunno, maybe something like this? /* * The framebuffer is not always 8 MiB that's just the size of the * PCI BAR. We temporarily abuse smem_len here to store the size * of the BAR. aty_init() will later correct it to match the actual * framebuffer size. * * On devices that don't have the auxiliary register aperture, the * registers are housed at the top end of the framebuffer PCI BAR. * aty_fudge_framebuffer_len() is used to reduce smem_len to not * overlap with the registers. */ > We do this > + * to match semantics over ioremap calls on framebuffer devices > + * with with other drivers with the info->fix.smem_len. > + */ > info->fix.smem_len = 0x800000; > > info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); > > Will respin. > > Luis -- Ville Syrjälä syrjala@xxxxxx http://www.sci.fi/~syrjala/ -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
