From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
mx6sl and mx6sx share the same LCD controller as mx23 and mx28.
Add support for it.
The basic difference is the number of clocks that are required:
- mx23/mx28: only one clock
- mx6sl: two clocks
- mx6sx: three clocks
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
---
Changes since RFC:
- Simplified the clock handling as suggested by Tomi
drivers/video/fbdev/Kconfig | 2 +-
drivers/video/fbdev/mxsfb.c | 19 +++++++++++++++++++
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index c7bf606..025b439 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2425,7 +2425,7 @@ config FB_JZ4740
config FB_MXS
tristate "MXS LCD framebuffer support"
- depends on FB && ARCH_MXS
+ depends on FB && (ARCH_MXS || ARCH_MXC)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/fbdev/mxsfb.c b/drivers/video/fbdev/mxsfb.c
index accf48a2..f8ac4a4 100644
--- a/drivers/video/fbdev/mxsfb.c
+++ b/drivers/video/fbdev/mxsfb.c
@@ -172,6 +172,8 @@ struct mxsfb_info {
struct fb_info fb_info;
struct platform_device *pdev;
struct clk *clk;
+ struct clk *clk_axi;
+ struct clk *clk_disp_axi;
void __iomem *base; /* registers */
unsigned allocated_size;
int enabled;
@@ -331,6 +333,11 @@ static void mxsfb_enable_controller(struct fb_info *fb_info)
}
}
+ if (host->clk_axi)
+ clk_prepare_enable(host->clk_axi);
+
+ if (host->clk_disp_axi)
+ clk_prepare_enable(host->clk_disp_axi);
clk_prepare_enable(host->clk);
clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
@@ -374,6 +381,10 @@ static void mxsfb_disable_controller(struct fb_info *fb_info)
writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
clk_disable_unprepare(host->clk);
+ if (host->clk_disp_axi)
+ clk_disable_unprepare(host->clk_disp_axi);
+ if (host->clk_axi)
+ clk_disable_unprepare(host->clk_axi);
host->enabled = 0;
@@ -867,6 +878,14 @@ static int mxsfb_probe(struct platform_device *pdev)
goto fb_release;
}
+ host->clk_axi = devm_clk_get(&host->pdev->dev, "axi");
+ if (IS_ERR(host->clk_axi))
+ host->clk_axi = NULL;
+
+ host->clk_disp_axi = devm_clk_get(&host->pdev->dev, "disp_axi");
+ if (IS_ERR(host->clk_disp_axi))
+ host->clk_disp_axi = NULL;
+
host->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
if (IS_ERR(host->reg_lcd))
host->reg_lcd = NULL;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
