Hi Tomi,
On 05/15/2014 12:10 PM, Tomi Valkeinen wrote:
> Add DT bindings documentation for LG.Philips LB035Q02 LCD panel.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
> .../bindings/video/lgphilips,lb035q02.txt | 33 ++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
>
> diff --git a/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
> new file mode 100644
> index 000000000000..1a1e653e5407
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
> @@ -0,0 +1,33 @@
> +LG.Philips LB035Q02 Panel
> +=========================
> +
> +Required properties:
> +- compatible: "lgphilips,lb035q02"
> +- enable-gpios: panel enable gpio
> +
> +Optional properties:
> +- label: a symbolic name for the panel
> +
> +Required nodes:
> +- Video port for DPI input
> +
> +Example
> +-------
> +
> +lcd-panel: panel@0 {
> + compatible = "lgphilips,lb035q02";
> + reg = <0>;
> + spi-max-frequency = <100000>;
> + spi-cpol;
> + spi-cpha;
> +
> + label = "lcd";
> +
> + enable-gpios = <&gpio7 7 0>;
> +
> + port {
> + lcd_in: endpoint {
> + remote-endpoint = <&dpi_out>;
> + };
> + };
> +};
>
The lcd-panel should be a child node of a SPI controller. Maybe this
could be mentioned? Or the example could be more explicit, like:
&mcspi1 {
lcd-panel: panel@0 {
....
};
};
Regards,
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
