Around Wed 19 Mar 2014 14:03:25 +0100 or thereabout, Alexandre Belloni wrote:
> Switch to the generic pwm_bl driver instead of atmel-pwm-bl.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
Acked-by: Hans-Christian Egtvedt <egtvedt@xxxxxxxxxxxx>
I do not have this board either.
> ---
> arch/avr32/boards/favr-32/setup.c | 49 +++++++++++++++++++++++-------------
> arch/avr32/configs/favr-32_defconfig | 6 ++---
> 2 files changed, 34 insertions(+), 21 deletions(-)
>
> diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
> index 1f121497b517..391f026705a5 100644
> --- a/arch/avr32/boards/favr-32/setup.c
> +++ b/arch/avr32/boards/favr-32/setup.c
> @@ -18,7 +18,10 @@
> #include <linux/gpio.h>
> #include <linux/leds.h>
> #include <linux/atmel-mci.h>
> -#include <linux/atmel-pwm-bl.h>
> +#include <linux/pwm.h>
> +#include <linux/pwm_backlight.h>
> +#include <linux/regulator/fixed.h>
> +#include <linux/regulator/machine.h>
> #include <linux/spi/spi.h>
> #include <linux/spi/ads7846.h>
>
> @@ -33,6 +36,8 @@
> #include <mach/board.h>
> #include <mach/portmux.h>
>
> +#define PWM_BL_CH 2
> +
> /* Oscillator frequencies. These are board-specific */
> unsigned long at32_board_osc_rates[3] = {
> [0] = 32768, /* 32.768 kHz on RTC osc */
> @@ -227,29 +232,37 @@ void __init favr32_setup_leds(void)
> platform_device_register(&favr32_led_dev);
> }
>
> -static struct atmel_pwm_bl_platform_data atmel_pwm_bl_pdata = {
> - .pwm_channel = 2,
> - .pwm_frequency = 200000,
> - .pwm_compare_max = 345,
> - .pwm_duty_max = 345,
> - .pwm_duty_min = 90,
> - .pwm_active_low = 1,
> - .gpio_on = GPIO_PIN_PA(28),
> - .on_active_low = 0,
> +static struct pwm_lookup pwm_lookup[] = {
> + PWM_LOOKUP("at91sam9rl-pwm", PWM_BL_CH, "pwm-backlight.0", NULL),
> };
>
> -static struct platform_device atmel_pwm_bl_dev = {
> - .name = "atmel-pwm-bl",
> - .id = 0,
> - .dev = {
> - .platform_data = &atmel_pwm_bl_pdata,
> +static struct regulator_consumer_supply fixed_power_consumers[] = {
> + REGULATOR_SUPPLY("power", "pwm-backlight.0"),
> +};
> +
> +static struct platform_pwm_backlight_data pwm_bl_data = {
> + .enable_gpio = GPIO_PIN_PA(28),
> + .pwm_period_ns = 5000,
> + .max_brightness = 255,
> + .dft_brightness = 255,
> + .lth_brightness = 50,
> + .pwm_active_low = true,
> +};
> +
> +static struct platform_device pwm_bl_device = {
> + .name = "pwm-backlight",
> + .dev = {
> + .platform_data = &pwm_bl_data,
> },
> };
>
> static void __init favr32_setup_atmel_pwm_bl(void)
> {
> - platform_device_register(&atmel_pwm_bl_dev);
> - at32_select_gpio(atmel_pwm_bl_pdata.gpio_on, 0);
> + pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
> + regulator_register_always_on(0, "fixed", fixed_power_consumers,
> + ARRAY_SIZE(fixed_power_consumers), 3300000);
> + platform_device_register(&pwm_bl_device);
> + at32_select_gpio(pwm_bl_data.enable_gpio, 0);
> }
>
> void __init setup_board(void)
> @@ -339,7 +352,7 @@ static int __init favr32_init(void)
>
> set_abdac_rate(at32_add_device_abdac(0, &abdac0_data));
>
> - at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
> + at32_add_device_pwm(1 << PWM_BL_CH);
> at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
> at32_add_device_mci(0, &mci0_data);
> at32_add_device_usba(0, NULL);
> diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
> index 07bed3f7eb5e..b3eb67dc05ac 100644
> --- a/arch/avr32/configs/favr-32_defconfig
> +++ b/arch/avr32/configs/favr-32_defconfig
> @@ -67,7 +67,6 @@ CONFIG_MTD_PHYSMAP=y
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_NBD=m
> CONFIG_BLK_DEV_RAM=m
> -CONFIG_ATMEL_PWM=m
> CONFIG_ATMEL_TCLIB=y
> CONFIG_ATMEL_SSC=m
> CONFIG_NETDEVICES=y
> @@ -108,7 +107,7 @@ CONFIG_FB=y
> CONFIG_FB_ATMEL=y
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> # CONFIG_LCD_CLASS_DEVICE is not set
> -CONFIG_BACKLIGHT_ATMEL_PWM=m
> +CONFIG_BACKLIGHT_PWM=m
> CONFIG_SOUND=m
> CONFIG_SOUND_PRIME=m
> # CONFIG_HID_SUPPORT is not set
> @@ -123,7 +122,6 @@ CONFIG_MMC=y
> CONFIG_MMC_ATMELMCI=y
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
> -CONFIG_LEDS_ATMEL_PWM=m
> CONFIG_LEDS_GPIO=y
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=y
> @@ -132,6 +130,8 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_DRV_AT32AP700X=y
> CONFIG_DMADEVICES=y
> +CONFIG_PWM=y
> +CONFIG_PWM_ATMEL=y
> CONFIG_EXT2_FS=y
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_FS_XATTR is not set
--
mvh
Hans-Christian Egtvedt
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
