The LCD controller represents some of the timing fields with a 0 in the register representing 1. This was not taken into account when these registers were being set. Interestingly enough not all of the LCDC controller timing registers implement this representation so carefully went through the technical reference manual to only "fix" the correct timings. Signed-off-by: Darren Etheridge <detheridge@xxxxxx> --- drivers/video/da8xx-fb.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 0333a0b..b131a6c 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -408,9 +408,9 @@ static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width, u32 reg; reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0xf; - reg |= ((back_porch & 0xff) << 24) - | ((front_porch & 0xff) << 16) - | ((pulse_width & 0x3f) << 10); + reg |= (((back_porch-1) & 0xff) << 24) + | (((front_porch-1) & 0xff) << 16) + | (((pulse_width-1) & 0x3f) << 10); lcdc_write(reg, LCD_RASTER_TIMING_0_REG); } @@ -422,7 +422,7 @@ static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, reg = lcdc_read(LCD_RASTER_TIMING_1_REG) & 0x3ff; reg |= ((back_porch & 0xff) << 24) | ((front_porch & 0xff) << 16) - | ((pulse_width & 0x3f) << 10); + | (((pulse_width-1) & 0x3f) << 10); lcdc_write(reg, LCD_RASTER_TIMING_1_REG); } -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
