From: Afzal Mohammed <afzal@xxxxxx> The interrupt handler explicitly has code that handles the sync lost interrupt. However the sync lost interrupt is never actually being enabled in the LCD controller, therefore this interrupt code path is not being exercised. This fix simply enables the generation of the sync lost interrupt by the LCD controller so it can be dealt with appropriately by the interrupt handler. Signed-off-by: Afzal Mohammed <afzal@xxxxxx> Signed-off-by: Darren Etheridge <detheridge@xxxxxx> --- drivers/video/da8xx-fb.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index e172a4a..dec333e 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -318,7 +318,7 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) | LCD_V2_END_OF_FRAME0_INT_ENA | LCD_V2_END_OF_FRAME1_INT_ENA | - LCD_FRAME_DONE; + LCD_FRAME_DONE | LCD_SYNC_LOST; lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG); } reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
