Hi, Jean-Christophe,
Could you please help to review these patches?
Thanks a lot!
Best Regards,
Alison Wang
> -----Original Message-----
> From: linux-arm-kernel [mailto:linux-arm-kernel-
> bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Alison Wang
> Sent: Friday, July 12, 2013 2:08 PM
> To: plagnioj@xxxxxxxxxxxx; tomi.valkeinen@xxxxxx; shawn.guo@xxxxxxxxxx;
> Estevam Fabio-R49496; linux-fbdev@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx
> Cc: Jin Zhengxiong-R64188
> Subject: [PATCH v2 0/5] ARM: vf610: Add DCU framebuffer driver for
> Vybrid VF610 platform
>
> This series contain DCU framebuffer driver for Freescale Vybrid VF610
> platform.
>
> The Display Controller Unit (DCU) module is a system master that
> fetches graphics stored in internal or external memory and displays
> them on a TFT LCD panel. A wide range of panel sizes is supported and
> the timing of the interface signals is highly configurable.
> Graphics are read directly from memory and then blended in real-time,
> which allows for dynamic content creation with minimal CPU intervention.
>
> The features:
>
> (1) Full RGB888 output to TFT LCD panel.
> (2) For the current LCD panel, WQVGA "480x272" is tested.
> (3) Blending of each pixel using up to 4 source layers dependent on
> size of panel.
> (4) Each graphic layer can be placed with one pixel resolution in
> either axis.
> (5) Each graphic layer support RGB565 and RGB888 direct colors without
> alpha channel and BGRA8888 direct colors with an alpha channel.
> (6) Each graphic layer support alpha blending with 8-bit resolution.
>
> Changes in v2:
> - Add a document for DCU framebuffer driver under
> Documentation/devicetree/bindings/fb/.
>
> ----------------------------------------------------------------
> Alison Wang (5):
> ARM: dts: vf610: Add DCU and TCON nodes
> ARM: dts: vf610-twr: Enable DCU and TCON devices
> ARM: clk: vf610: Add DCU and TCON clock support
> fb: Add DCU framebuffer driver for Vybrid VF610 platform
> Documentation: DT: Add DCU framebuffer driver
>
> Documentation/devicetree/bindings/fb/fsl-dcu-fb.txt | 36 ++++
> arch/arm/boot/dts/vf610-twr.dts | 10 +
> arch/arm/boot/dts/vf610.dtsi | 19 +-
> arch/arm/mach-imx/clk-vf610.c | 5 +
> drivers/video/Kconfig | 9 +
> drivers/video/Makefile | 1 +
> drivers/video/fsl-dcu-fb.c | 1091
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> +++++++++++++++++++++++++
> include/dt-bindings/clock/vf610-clock.h | 3 +-
> 8 files changed, 1172 insertions(+), 2 deletions(-) create mode
> 100644 Documentation/devicetree/bindings/fb/fsl-dcu-fb.txt
> create mode 100644 drivers/video/fsl-dcu-fb.c
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
