board-cm-t35.c and board-ldp.c contain regulator supply entries for
vdds_dsi. However, the given device name is wrong.
This patch fixes the device name from omapdss_dsi1 to omapdss_dsi.0.
Note that as far as I know, DSI driver is not used on these boards, so
this should not have caused any problems.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/mach-omap2/board-cm-t35.c | 2 +-
arch/arm/mach-omap2/board-ldp.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ee6218c..ce00968 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -293,7 +293,7 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d0d17bc..3dbc881 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -272,7 +272,7 @@ static struct regulator_init_data ldp_vaux1 = {
static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
static struct regulator_init_data ldp_vpll2 = {
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
