On 22/04/13 13:02, Maxime Ripard wrote: > Hi everyone, > > This is a patchset to improve significantly (by an order of magnitude) > the refreshing time of the SSD1306 and SSD1307. > > We do so by sending the pixels by batches, instead of 8 at a time, > combined with some additionnal features found on these controllers > that allows to send a whole screen content at once. > > This obviously removes the tearing effect that was previously seen > with these controllers. > > This patchset depends on the "Add support for the Solomon SSD1306 OLED > Controller" I sent previously. > > Thanks, > Maxime > > Maxime Ripard (4): > ARM: cfa10036: dt: Change i2c0 clock frequency > ssd1307fb: Rework the communication functions > ssd1307fb: Speed up the communication with the controller > ssd1307fb: Make use of horizontal addressing mode > > arch/arm/boot/dts/imx28-cfa10036.dts | 1 + > drivers/video/ssd1307fb.c | 123 ++++++++++++++++++++++++---------- > 2 files changed, 89 insertions(+), 35 deletions(-) > I've taken the patches 2-4 into fbdev 3.11 branch. The first patch "ARM: cfa10036: dt: Change i2c0 clock frequency" should preferably go through arch tree. Tomi -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
