The code until now was sending only 1pixel-wide page segment at once,
and started a new transfer every time. It has proven very inefficient,
because for one byte to display on the screen, we had to actually send 3
bytes over I2C: the address, the type of data that was going to the
controller, and then the actual data.
This patches changes that by sending a whole page at once, avoiding most
of this expensive overhead.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
drivers/video/ssd1307fb.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 35f5348..cab5f7c 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -168,23 +168,28 @@ static void ssd1307fb_update_display(struct ssd1307fb_par *par)
*/
for (i = 0; i < (par->height / 8); i++) {
+ struct ssd1307fb_array *array;
ssd1307fb_write_cmd(par->client,
SSD1307FB_START_PAGE_ADDRESS + i + par->page_offset);
ssd1307fb_write_cmd(par->client, 0x00);
ssd1307fb_write_cmd(par->client, 0x10);
+ array = ssd1307fb_alloc_array(par->width, SSD1307FB_DATA);
+
for (j = 0; j < par->width; j++) {
- u8 buf = 0;
+ array->data[j] = 0;
for (k = 0; k < 8; k++) {
u32 page_length = par->width * i;
u32 index = page_length + (par->width * k + j) / 8;
u8 byte = *(vmem + index);
u8 bit = byte & (1 << (j % 8));
bit = bit >> (j % 8);
- buf |= bit << k;
+ array->data[j] |= bit << k;
}
- ssd1307fb_write_data(par->client, buf);
}
+
+ ssd1307fb_write_array(par->client, array, par->width);
+ kfree(array);
}
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
