On Thu, Apr 18, 2013 at 06:06:14PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 15:03 Thu 18 Apr , Markus Pargmann wrote:
> > Add devicetree support for imx framebuffer driver. It uses the generic
> > display bindings and helper functions.
> >
> > Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> > Cc: Fabio Estevam <festevam@xxxxxxxxx>
> > Cc: Mark Rutland <mark.rutland@xxxxxxx>
> > ---
> >
> > Notes:
> > Changes in v4:
> > - Remove eukrea specific dmacr property.
> > - Add optional dmacr property. If not present, the dmacr reset value is not
> > changed.
> >
> > Changes in v3:
> > - Fix returncodes of of_read_mode function and print error messages
> > - Introduce a lower bound check for bits per pixel
> > - Calculate correct bytes per pixel value before using it for the calculation of
> > memory size
> > - Change DT property names
> >
> > Changes in v2:
> > - Removed pwmr register property
> > - Cleanup of devicetree binding documentation
> > - Use default values for pwmr and lscr1
> >
> > .../devicetree/bindings/video/fsl,imx-fb.txt | 51 ++++++
> > drivers/video/imxfb.c | 194 +++++++++++++++++----
> > 2 files changed, 210 insertions(+), 35 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> >
> > diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > new file mode 100644
> > index 0000000..aff16a4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > @@ -0,0 +1,51 @@
> > +Freescale imx21 Framebuffer
> > +
> > +This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
> > +
> > +Required properties:
> > +- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
> > +- reg : Should contain 1 register ranges(address and length)
> > +- interrupts : One interrupt of the fb dev
> > +
> > +Required nodes:
> > +- display: Phandle to a display node as described in
> > + Documentation/devicetree/bindings/video/display-timing.txt
> > + Additional, the display node has to define properties:
> > + - fsl,bpp: Bits per pixel
> > + - fsl,pcr: LCDC PCR value
> > +
> > +Optional properties:
> > +- fsl,dmacr: DMA Control Register value. This is optional. By default, the
> > + register is not modified as recommended by the datasheet.
> > +- fsl,lscr1: LCDC Sharp Configuration Register value.
> > +
> > +Example:
> > +
> > + imxfb: fb@10021000 {
> > + compatible = "fsl,imx27-fb", "fsl,imx21-fb";
> you put both when in the doc you request one
Thanks, fixed.
> > + interrupts = <61>;
> > + reg = <0x10021000 0x1000>;
> > + display = <&display0>;
> > + };
> > +
> > + ...
> > +
> > + display0: display0 {
> > + model = "Primeview-PD050VL1";
> > + native-mode = <&timing_disp0>;
> > + fsl,bpp = <16>; /* non-standard but required */
> there is a generic binding bit-per-pixel use a cross other IP
I can't find a generic binding for that. There are only 2 other drivers
using a "bpp" property, but they both use it within different contexts.
tilcdc panel uses it within a "panel-info" property and via,vt8500-fb
within modes. So I think it would be better to use a clear distinction
because there is no generic binding. That was also suggested in comments
on version 2 of this patch:
https://patchwork.kernel.org/patch/2220511/
Regards,
Markus
> > + fsl,pcr = <0xf0c88080>; /* non-standard but required */
> > + display-timings {
> > + timing_disp0: 640x480 {
> > + hactive = <640>;
> > + vactive = <480>;
> > + hback-porch = <112>;
> > + hfront-porch = <36>;
> > + hsync-len = <32>;
> > + vback-porch = <33>;
> > + vfront-porch = <33>;
> > + vsync-len = <2>;
> > + clock-frequency = <25000000>;
> > + };
> > + };
> > + };
> > diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
> > index ef2b587..e0230f8 100644
> > --- a/drivers/video/imxfb.c
> > +++ b/drivers/video/imxfb.c
> > @@ -32,6 +32,12 @@
> > #include <linux/io.h>
> > #include <linux/math64.h>
> > #include <linux/uaccess.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +
> > +#include <video/of_display_timing.h>
> > +#include <video/of_videomode.h>
> > +#include <video/videomode.h>
> >
> > #include <linux/platform_data/video-imxfb.h>
> >
> > @@ -117,10 +123,11 @@
> > #define LGWCR_GWAV(alpha) (((alpha) & 0xff) << 24)
> > #define LGWCR_GWE (1 << 22)
> >
> > +#define IMXFB_LSCR1_DEFAULT 0x00120300
> > +
> > /* Used fb-mode. Can be set on kernel command line, therefore file-static. */
> > static const char *fb_mode;
> >
> > -
> > /*
> > * These are the bitfields for each
> > * display depth that we support.
> > @@ -192,6 +199,19 @@ static struct platform_device_id imxfb_devtype[] = {
> > };
> > MODULE_DEVICE_TABLE(platform, imxfb_devtype);
> >
> > +static struct of_device_id imxfb_of_dev_id[] = {
> > + {
> > + .compatible = "fsl,imx1-fb",
> > + .data = &imxfb_devtype[IMX1_FB],
> > + }, {
> > + .compatible = "fsl,imx21-fb",
> > + .data = &imxfb_devtype[IMX21_FB],
> > + }, {
> > + /* sentinel */
> > + }
> > +};
> > +MODULE_DEVICE_TABLE(of, imxfb_of_dev_id);
> > +
> > static inline int is_imx1_fb(struct imxfb_info *fbi)
> > {
> > return fbi->devtype == IMX1_FB;
> > @@ -324,6 +344,9 @@ static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi)
> > struct imx_fb_videomode *m;
> > int i;
> >
> > + if (!fb_mode)
> > + return &fbi->mode[0];
> > +
> > for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) {
> > if (!strcmp(m->mode.name, fb_mode))
> > return m;
> > @@ -479,6 +502,9 @@ static int imxfb_bl_update_status(struct backlight_device *bl)
> > struct imxfb_info *fbi = bl_get_data(bl);
> > int brightness = bl->props.brightness;
> >
> > + if (!fbi->pwmr)
> > + return 0;
> > +
> > if (bl->props.power != FB_BLANK_UNBLANK)
> > brightness = 0;
> > if (bl->props.fb_blank != FB_BLANK_UNBLANK)
> > @@ -719,10 +745,14 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
> >
> > writel(fbi->pcr, fbi->regs + LCDC_PCR);
> > #ifndef PWMR_BACKLIGHT_AVAILABLE
> > - writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
> > + if (fbi->pwmr)
> > + writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
> > #endif
> > writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
> > - writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
> > +
> > + /* dmacr = 0 is no valid value, as we need DMA control marks. */
> > + if (fbi->dmacr)
> > + writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
> >
> > return 0;
> > }
> > @@ -758,13 +788,12 @@ static int imxfb_resume(struct platform_device *dev)
> > #define imxfb_resume NULL
> > #endif
> >
> > -static int __init imxfb_init_fbinfo(struct platform_device *pdev)
> > +static int imxfb_init_fbinfo(struct platform_device *pdev)
> > {
> > struct imx_fb_platform_data *pdata = pdev->dev.platform_data;
> > struct fb_info *info = dev_get_drvdata(&pdev->dev);
> > struct imxfb_info *fbi = info->par;
> > - struct imx_fb_videomode *m;
> > - int i;
> > + struct device_node *np;
> >
> > pr_debug("%s\n",__func__);
> >
> > @@ -795,41 +824,95 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
> > info->fbops = &imxfb_ops;
> > info->flags = FBINFO_FLAG_DEFAULT |
> > FBINFO_READS_FAST;
> > - info->var.grayscale = pdata->cmap_greyscale;
> > - fbi->cmap_inverse = pdata->cmap_inverse;
> > - fbi->cmap_static = pdata->cmap_static;
> > - fbi->lscr1 = pdata->lscr1;
> > - fbi->dmacr = pdata->dmacr;
> > - fbi->pwmr = pdata->pwmr;
> > - fbi->lcd_power = pdata->lcd_power;
> > - fbi->backlight_power = pdata->backlight_power;
> > -
> > - for (i = 0, m = &pdata->mode[0]; i < pdata->num_modes; i++, m++)
> > - info->fix.smem_len = max_t(size_t, info->fix.smem_len,
> > - m->mode.xres * m->mode.yres * m->bpp / 8);
> > + if (pdata) {
> > + info->var.grayscale = pdata->cmap_greyscale;
> > + fbi->cmap_inverse = pdata->cmap_inverse;
> > + fbi->cmap_static = pdata->cmap_static;
> > + fbi->lscr1 = pdata->lscr1;
> > + fbi->dmacr = pdata->dmacr;
> > + fbi->pwmr = pdata->pwmr;
> > + fbi->lcd_power = pdata->lcd_power;
> > + fbi->backlight_power = pdata->backlight_power;
> > + } else {
> > + np = pdev->dev.of_node;
> > + info->var.grayscale = of_property_read_bool(np,
> > + "cmap-greyscale");
> > + fbi->cmap_inverse = of_property_read_bool(np, "cmap-inverse");
> > + fbi->cmap_static = of_property_read_bool(np, "cmap-static");
> > +
> > + fbi->lscr1 = IMXFB_LSCR1_DEFAULT;
> > + of_property_read_u32(np, "fsl,lscr1", &fbi->lscr1);
> > +
> > + of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr);
> > +
> > + /* These two function pointers could be used by some specific
> > + * platforms. */
> > + fbi->lcd_power = NULL;
> > + fbi->backlight_power = NULL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imxfb_of_read_mode(struct device *dev, struct device_node *np,
> > + struct imx_fb_videomode *imxfb_mode)
> > +{
> > + int ret;
> > + struct fb_videomode *of_mode = &imxfb_mode->mode;
> > + u32 bpp;
> > + u32 pcr;
> > +
> > + ret = of_property_read_string(np, "model", &of_mode->name);
> > + if (ret)
> > + of_mode->name = NULL;
> > +
> > + ret = of_get_fb_videomode(np, of_mode, OF_USE_NATIVE_MODE);
> > + if (ret) {
> > + dev_err(dev, "Failed to get videomode from DT\n");
> > + return ret;
> > + }
> > +
> > + ret = of_property_read_u32(np, "fsl,bpp", &bpp);
> > + ret |= of_property_read_u32(np, "fsl,pcr", &pcr);
> > +
> > + if (ret) {
> > + dev_err(dev, "Failed to read bpp and pcr from DT\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (bpp < 1 || bpp > 255) {
> > + dev_err(dev, "Bits per pixel have to be between 1 and 255\n");
> > + return -EINVAL;
> > + }
> > +
> > + imxfb_mode->bpp = bpp;
> > + imxfb_mode->pcr = pcr;
> >
> > return 0;
> > }
> >
> > -static int __init imxfb_probe(struct platform_device *pdev)
> > +static int imxfb_probe(struct platform_device *pdev)
> > {
> > struct imxfb_info *fbi;
> > struct fb_info *info;
> > struct imx_fb_platform_data *pdata;
> > struct resource *res;
> > + struct imx_fb_videomode *m;
> > + const struct of_device_id *of_id;
> > int ret, i;
> > + int bytes_per_pixel;
> >
> > dev_info(&pdev->dev, "i.MX Framebuffer driver\n");
> >
> > + of_id = of_match_device(imxfb_of_dev_id, &pdev->dev);
> > + if (of_id)
> > + pdev->id_entry = of_id->data;
> > +
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > if (!res)
> > return -ENODEV;
> >
> > pdata = pdev->dev.platform_data;
> > - if (!pdata) {
> > - dev_err(&pdev->dev,"No platform_data available\n");
> > - return -ENOMEM;
> > - }
> >
> > info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev);
> > if (!info)
> > @@ -837,15 +920,55 @@ static int __init imxfb_probe(struct platform_device *pdev)
> >
> > fbi = info->par;
> >
> > - if (!fb_mode)
> > - fb_mode = pdata->mode[0].mode.name;
> > -
> > platform_set_drvdata(pdev, info);
> >
> > ret = imxfb_init_fbinfo(pdev);
> > if (ret < 0)
> > goto failed_init;
> >
> > + if (pdata) {
> > + if (!fb_mode)
> > + fb_mode = pdata->mode[0].mode.name;
> > +
> > + fbi->mode = pdata->mode;
> > + fbi->num_modes = pdata->num_modes;
> > + } else {
> > + struct device_node *display_np;
> > + fb_mode = NULL;
> > +
> > + display_np = of_parse_phandle(pdev->dev.of_node, "display", 0);
> > + if (!display_np) {
> > + dev_err(&pdev->dev, "No display defined in devicetree\n");
> > + ret = -EINVAL;
> > + goto failed_of_parse;
> > + }
> > +
> > + /*
> > + * imxfb does not support more modes, we choose only the native
> > + * mode.
> > + */
> > + fbi->num_modes = 1;
> > +
> > + fbi->mode = devm_kzalloc(&pdev->dev,
> > + sizeof(struct imx_fb_videomode), GFP_KERNEL);
> > + if (!fbi->mode) {
> > + ret = -ENOMEM;
> > + goto failed_of_parse;
> > + }
> > +
> > + ret = imxfb_of_read_mode(&pdev->dev, display_np, fbi->mode);
> > + if (ret)
> > + goto failed_of_parse;
> > + }
> > +
> > + /* Calculate maximum bytes used per pixel. In most cases this should
> > + * be the same as m->bpp/8 */
> > + m = &fbi->mode[0];
> > + bytes_per_pixel = (m->bpp + 7) / 8;
> > + for (i = 0; i < fbi->num_modes; i++, m++)
> > + info->fix.smem_len = max_t(size_t, info->fix.smem_len,
> > + m->mode.xres * m->mode.yres * bytes_per_pixel);
> > +
> > res = request_mem_region(res->start, resource_size(res),
> > DRIVER_NAME);
> > if (!res) {
> > @@ -878,7 +1001,8 @@ static int __init imxfb_probe(struct platform_device *pdev)
> > goto failed_ioremap;
> > }
> >
> > - if (!pdata->fixed_screen_cpu) {
> > + /* Seems not being used by anyone, so no support for oftree */
> > + if (!pdata || !pdata->fixed_screen_cpu) {
> > fbi->map_size = PAGE_ALIGN(info->fix.smem_len);
> > fbi->map_cpu = dma_alloc_writecombine(&pdev->dev,
> > fbi->map_size, &fbi->map_dma, GFP_KERNEL);
> > @@ -903,18 +1027,16 @@ static int __init imxfb_probe(struct platform_device *pdev)
> > info->fix.smem_start = fbi->screen_dma;
> > }
> >
> > - if (pdata->init) {
> > + if (pdata && pdata->init) {
> > ret = pdata->init(fbi->pdev);
> > if (ret)
> > goto failed_platform_init;
> > }
> >
> > - fbi->mode = pdata->mode;
> > - fbi->num_modes = pdata->num_modes;
> >
> > INIT_LIST_HEAD(&info->modelist);
> > - for (i = 0; i < pdata->num_modes; i++)
> > - fb_add_videomode(&pdata->mode[i].mode, &info->modelist);
> > + for (i = 0; i < fbi->num_modes; i++)
> > + fb_add_videomode(&fbi->mode[i].mode, &info->modelist);
> >
> > /*
> > * This makes sure that our colour bitfield
> > @@ -944,10 +1066,10 @@ static int __init imxfb_probe(struct platform_device *pdev)
> > failed_register:
> > fb_dealloc_cmap(&info->cmap);
> > failed_cmap:
> > - if (pdata->exit)
> > + if (pdata && pdata->exit)
> > pdata->exit(fbi->pdev);
> > failed_platform_init:
> > - if (!pdata->fixed_screen_cpu)
> > + if (pdata && !pdata->fixed_screen_cpu)
> > dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
> > fbi->map_dma);
> > failed_map:
> > @@ -956,6 +1078,7 @@ failed_ioremap:
> > failed_getclock:
> > release_mem_region(res->start, resource_size(res));
> > failed_req:
> > +failed_of_parse:
> > kfree(info->pseudo_palette);
> > failed_init:
> > platform_set_drvdata(pdev, NULL);
> > @@ -980,7 +1103,7 @@ static int imxfb_remove(struct platform_device *pdev)
> > unregister_framebuffer(info);
> >
> > pdata = pdev->dev.platform_data;
> > - if (pdata->exit)
> > + if (pdata && pdata->exit)
> > pdata->exit(fbi->pdev);
> >
> > fb_dealloc_cmap(&info->cmap);
> > @@ -1009,6 +1132,7 @@ static struct platform_driver imxfb_driver = {
> > .shutdown = imxfb_shutdown,
> > .driver = {
> > .name = DRIVER_NAME,
> > + .of_match_table = imxfb_of_dev_id,
> > },
> > .id_table = imxfb_devtype,
> > };
> > --
> > 1.8.1.5
> >
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
