The picodlp panel driver now manages the gpios required to configure the
panel. This was previously done in omap_dss_device's platform_enable/disable
callbacks defined in board files using this panel.
All the board files using this panel now pass the gpio information as platform
data via the panel_generic_dpi_data struct, which is needed by the panel driver
to configure the gpios connected to the panel. Hence, the
platform_enable/disable ops can be safely removed now.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
drivers/video/omap2/displays/panel-picodlp.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-picodlp.c b/drivers/video/omap2/displays/panel-picodlp.c
index bc8ac77..62f2db0 100644
--- a/drivers/video/omap2/displays/panel-picodlp.c
+++ b/drivers/video/omap2/displays/panel-picodlp.c
@@ -354,12 +354,6 @@ static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
- if (dssdev->platform_enable) {
- r = dssdev->platform_enable(dssdev);
- if (r)
- return r;
- }
-
gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
msleep(1);
gpio_set_value(picodlp_pdata->pwrgood_gpio, 1);
@@ -398,9 +392,6 @@ static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
err:
omapdss_dpi_display_disable(dssdev);
err1:
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
return r;
}
@@ -412,9 +403,6 @@ static void picodlp_panel_power_off(struct omap_dss_device *dssdev)
gpio_set_value(picodlp_pdata->emu_done_gpio, 0);
gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
-
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
}
static int picodlp_panel_probe(struct omap_dss_device *dssdev)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
