The tpo-td043 panel driver now manages the gpios required to configure the panel.
This was previously done in omap_dss_device's platform_enable/disable callbacks
defined in board files using this panel.
All the board files using this panel now pass the gpio information as platform
data via the panel_tpo_td043_data struct, which is needed by the panel driver to
configure the gpios connected to the panel. Hence, the platform_enable/disable
ops can be safely removed now.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
.../video/omap2/displays/panel-tpo-td043mtea1.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index c8244bc..24bb0ff 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -348,12 +348,6 @@ static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
if (r)
goto err0;
- if (dssdev->platform_enable) {
- r = dssdev->platform_enable(dssdev);
- if (r)
- goto err1;
- }
-
/*
* If we are resuming from system suspend, SPI clocks might not be
* enabled yet, so we'll program the LCD from SPI PM resume callback.
@@ -380,9 +374,6 @@ static void tpo_td043_disable_dss(struct omap_dss_device *dssdev)
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
omapdss_dpi_display_disable(dssdev);
if (!tpo_td043->spi_suspended)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
