The nec-nl8048 panel driver now manages the gpios required to configure the
panel. This was previously done in omap_dss_device's platform_enable/disable
callbacks defined in board files using this panel.
All the board files using this panel now pass the gpio information as platform
data via the panel_nec_nl8048_data struct, which is needed by the panel driver
to configure the gpios connected to the panel. Hence, the
platform_enable/disable ops can be safely removed now.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
.../omap2/displays/panel-nec-nl8048hl11-01b.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
index 3b85e2a..1e0097d 100644
--- a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
+++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
@@ -133,18 +133,11 @@ static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
if (r)
goto err0;
- if (dssdev->platform_enable) {
- r = dssdev->platform_enable(dssdev);
- if (r)
- goto err1;
- }
-
if (gpio_is_valid(pd->res_gpio))
gpio_set_value_cansleep(pd->res_gpio, 1);
return 0;
-err1:
- omapdss_dpi_display_disable(dssdev);
+
err0:
return r;
}
@@ -159,9 +152,6 @@ static void nec_8048_panel_power_off(struct omap_dss_device *dssdev)
if (gpio_is_valid(pd->res_gpio))
gpio_set_value_cansleep(pd->res_gpio, 0);
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
omapdss_dpi_display_disable(dssdev);
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
