Hi everyone, This patchset adds support for the solomon SSD1307 OLED controller present in the CFA-10036 board. It first adds the framebuffer driver for this controller, and then the needed bits to enable it in the cfa10036 dts. Considering that the driver has been around since almost three months now, and I have not received any comments on the framebuffer part, I'd very much like it to be included in 3.8 if possible. Thanks, Maxime Changes from v5: * Fixed bogus reset code Maxime Ripard (2): video: Add support for the Solomon SSD1307 OLED Controller ARM: dts: mxs: add oled support for the cfa-10036 .../devicetree/bindings/video/ssd1307fb.txt | 24 ++ arch/arm/boot/dts/imx28-cfa10036.dts | 19 + drivers/video/Kconfig | 13 + drivers/video/Makefile | 1 + drivers/video/ssd1307fb.c | 407 ++++++++++++++++++++ 5 files changed, 464 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/ssd1307fb.txt create mode 100644 drivers/video/ssd1307fb.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
