The omap_dispc_unregister_isr() and _dsi_print_reset_status() consist of a
number of debug prints which need to be enabled all at once or none at all. So,
these debug prints in corresponding functions are replaced with one dynamic
debug enabled pr_debug() each.
Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
---
drivers/video/omap2/dss/dispc.c | 32 +++++++++++++-------------------
drivers/video/omap2/dss/dsi.c | 30 ++++++++++++++----------------
2 files changed, 27 insertions(+), 35 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index a173a94..67d9f3b 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3675,26 +3675,20 @@ static void print_irq_status(u32 status)
if ((status & dispc.irq_error_mask) == 0)
return;
- printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status);
-
-#define PIS(x) \
- if (status & DISPC_IRQ_##x) \
- printk(#x " ");
- PIS(GFX_FIFO_UNDERFLOW);
- PIS(OCP_ERR);
- PIS(VID1_FIFO_UNDERFLOW);
- PIS(VID2_FIFO_UNDERFLOW);
- if (dss_feat_get_num_ovls() > 3)
- PIS(VID3_FIFO_UNDERFLOW);
- PIS(SYNC_LOST);
- PIS(SYNC_LOST_DIGIT);
- if (dss_has_feature(FEAT_MGR_LCD2))
- PIS(SYNC_LOST2);
- if (dss_has_feature(FEAT_MGR_LCD3))
- PIS(SYNC_LOST3);
+#define PIS(x) (status & DISPC_IRQ_##x) ? (#x " ") : ""
+
+ pr_debug("DISPC IRQ: 0x%x: %s%s%s%s%s%s%s%s%s\n",
+ status,
+ PIS(OCP_ERR),
+ PIS(GFX_FIFO_UNDERFLOW),
+ PIS(VID1_FIFO_UNDERFLOW),
+ PIS(VID2_FIFO_UNDERFLOW),
+ dss_feat_get_num_ovls() > 3 ? PIS(VID3_FIFO_UNDERFLOW) : "",
+ PIS(SYNC_LOST),
+ PIS(SYNC_LOST_DIGIT),
+ dss_has_feature(FEAT_MGR_LCD2) ? PIS(SYNC_LOST2) : "",
+ dss_has_feature(FEAT_MGR_LCD3) ? PIS(SYNC_LOST3) : "");
#undef PIS
-
- printk("\n");
}
#endif
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index b0345f3..6dd073a 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1121,14 +1121,6 @@ static void _dsi_print_reset_status(struct platform_device *dsidev)
* I/O. */
l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
- printk(KERN_DEBUG "DSI resets: ");
-
- l = dsi_read_reg(dsidev, DSI_PLL_STATUS);
- printk("PLL (%d) ", FLD_GET(l, 0, 0));
-
- l = dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG1);
- printk("CIO (%d) ", FLD_GET(l, 29, 29));
-
if (dss_has_feature(FEAT_DSI_REVERSE_TXCLKESC)) {
b0 = 28;
b1 = 27;
@@ -1139,14 +1131,20 @@ static void _dsi_print_reset_status(struct platform_device *dsidev)
b2 = 26;
}
- l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
- printk("PHY (%x%x%x, %d, %d, %d)\n",
- FLD_GET(l, b0, b0),
- FLD_GET(l, b1, b1),
- FLD_GET(l, b2, b2),
- FLD_GET(l, 29, 29),
- FLD_GET(l, 30, 30),
- FLD_GET(l, 31, 31));
+#define DSI_FLD_GET(fld, start, end)\
+ FLD_GET(dsi_read_reg(dsidev, DSI_##fld), start, end)
+
+ pr_debug("DSI resets: PLL (%d) CIO (%d) PHY (%x%x%x, %d, %d, %d)\n",
+ DSI_FLD_GET(PLL_STATUS, 0, 0),
+ DSI_FLD_GET(COMPLEXIO_CFG1, 29, 29),
+ DSI_FLD_GET(DSIPHY_CFG5, b0, b0),
+ DSI_FLD_GET(DSIPHY_CFG5, b1, b1),
+ DSI_FLD_GET(DSIPHY_CFG5, b2, b2),
+ DSI_FLD_GET(DSIPHY_CFG5, 29, 29),
+ DSI_FLD_GET(DSIPHY_CFG5, 30, 30),
+ DSI_FLD_GET(DSIPHY_CFG5, 31, 31));
+
+#undef DSI_FLD_GET
}
#else
#define _dsi_print_reset_status(x)
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
