Re: [PATCH V3] video: exynos_dp: Add device tree support to DP driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday, September 25, 2012 4:36 AM Ajay Kumar wrote
> 
> This patch enables device tree based discovery support for DP driver.
> The driver is modified to handle platform data in both the cases:
> with DT and non-DT.
> Documentation is also added for the DT bindings.
> 
> DP-PHY should be regarded as a seperate device node while
> being passed from device tree list, and device node for
> DP should contain DP-PHY as child node with property name "dp-phy"
> associated with it.
> 
> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>

Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx>


Best regards,
Jingoo Han

> ---
>  .../devicetree/bindings/video/exynos_dp.txt        |   83 ++++++++++
>  drivers/video/exynos/exynos_dp_core.c              |  168 ++++++++++++++++++--
>  drivers/video/exynos/exynos_dp_core.h              |    2 +
>  3 files changed, 239 insertions(+), 14 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/video/exynos_dp.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt
> b/Documentation/devicetree/bindings/video/exynos_dp.txt
> new file mode 100644
> index 0000000..c27f892
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> @@ -0,0 +1,83 @@
> +Exynos Displayport driver should configure the displayport interface
> +based on the type of panel connected to it.
> +
> +We use two nodes:
> +	-dptx_phy node
> +	-display-port-controller node
> +
> +For the dp-phy initialization, we use a dptx_phy node.
> +Required properties for dptx_phy:
> +	-compatible:
> +		Should be "samsung,dp-phy".
> +	-samsung,dptx_phy_reg:
> +		Base address of DP PHY register.
> +	-samsung,enable_bit:
> +		The bit used to enable/disable DP PHY.
> +
> +For the Panel initialization, we read data from display-port-controller node.
> +Required properties for display-port-controller:
> +	-compatible:
> +		Should be "samsung,exynos5-dp".
> +	-reg:
> +		physical base address of the controller and length
> +		of memory mapped region.
> +	-interrupts:
> +		Internet combiner values.
> +	-interrupt-parent:
> +		Address of Interrupt combiner node.
> +	-dp_phy:
> +		Address of dptx_phy node.
> +	-samsung,color_space:
> +		input video data format.
> +			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
> +	-samsung,dynamic_range:
> +		dynamic range for input video data.
> +			VESA = 0, CEA = 1
> +	-samsung,ycbcr_coeff:
> +		YCbCr co-efficients for input video.
> +			COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
> +	-samsung,color_depth:
> +		Bit per color component.
> +			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
> +	-samsung,link_rate:
> +		link rates supportd by the panel.
> +			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
> +	-samsung,lane_count:
> +		number of lanes supported by the panel.
> +			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
> +	-samsung,interlaced:
> +		Interlace scan mode.
> +			Progressive if defined, Interlaced if not defined
> +	-samsung,v_sync_polarity:
> +		VSYNC polarity configuration.
> +			High if defined, Low if not defined
> +	-samsung,h_sync_polarity:
> +		HSYNC polarity configuration.
> +			High if defined, Low if not defined
> +
> +Example:
> +
> +SOC specific portion:
> +	dptx_phy: dptx_phy@0x10040720 {
> +		compatible = "samsung,dp-phy";
> +		samsung,dptx_phy_reg = <0x10040720>;
> +		samsung,enable_bit = <1>;
> +	};
> +
> +	display-port-controller {
> +		compatible = "samsung,exynos5-dp";
> +		reg = <0x145B0000 0x10000>;
> +		interrupts = <10 3>;
> +		interrupt-parent = <&combiner>;
> +		dp_phy = <&dptx_phy>;
> +        };
> +
> +Board Specific portion:
> +	display-port-controller {
> +		samsung,color_space = <0>;
> +		samsung,dynamic_range = <0>;
> +		samsung,ycbcr_coeff = <0>;
> +		samsung,color_depth = <1>;
> +		samsung,link_rate = <0x0a>;
> +		samsung,lane_count = <2>;
> +	};
> diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
> index cdc1398..bb0f10c 100644
> --- a/drivers/video/exynos/exynos_dp_core.c
> +++ b/drivers/video/exynos/exynos_dp_core.c
> @@ -18,6 +18,7 @@
>  #include <linux/io.h>
>  #include <linux/interrupt.h>
>  #include <linux/delay.h>
> +#include <linux/of.h>
> 
>  #include <video/exynos_dp.h>
> 
> @@ -856,6 +857,106 @@ static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
>  	return IRQ_HANDLED;
>  }
> 
> +#ifdef CONFIG_OF
> +struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
> +{
> +	struct device_node *dp_node = dev->of_node;
> +	struct exynos_dp_platdata *pd;
> +	struct video_info *dp_video_config;
> +
> +	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
> +	if (!pd) {
> +		dev_err(dev, "memory allocation for pdata failed\n");
> +		return ERR_PTR(-ENOMEM);
> +	}
> +	dp_video_config = devm_kzalloc(dev,
> +				sizeof(*dp_video_config), GFP_KERNEL);
> +
> +	if (!dp_video_config) {
> +		dev_err(dev, "memory allocation for video config failed\n");
> +		return ERR_PTR(-ENOMEM);
> +	}
> +	pd->video_info = dp_video_config;
> +
> +	if (of_get_property(dp_node, "samsung,h-sync-polarity", NULL))
> +		dp_video_config->h_sync_polarity = 1;
> +
> +	if (of_get_property(dp_node, "samsung,v-sync-polarity", NULL))
> +		dp_video_config->v_sync_polarity = 1;
> +
> +	if (of_get_property(dp_node, "samsung,interlaced", NULL))
> +		dp_video_config->interlaced = 1;
> +
> +	of_property_read_u32(dp_node, "samsung,color_space",
> +				&dp_video_config->color_space);
> +
> +	of_property_read_u32(dp_node, "samsung,dynamic_range",
> +				&dp_video_config->dynamic_range);
> +
> +	of_property_read_u32(dp_node, "samsung,ycbcr_coeff",
> +				&dp_video_config->ycbcr_coeff);
> +
> +	of_property_read_u32(dp_node, "samsung,color_depth",
> +				&dp_video_config->color_depth);
> +
> +	of_property_read_u32(dp_node, "samsung,link_rate",
> +				&dp_video_config->link_rate);
> +
> +	of_property_read_u32(dp_node, "samsung,lane_count",
> +				&dp_video_config->lane_count);
> +	return pd;
> +}
> +
> +void exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
> +{
> +	struct device_node *dp_phy_node;
> +	const __be32 *parp;
> +	u32 phy_base;
> +	void *virt_phy_base;
> +
> +	parp = of_get_property(dp->dev->of_node, "dp_phy", NULL);
> +	if (!parp) {
> +		dp->dp_phy_addr = NULL;
> +		return;
> +	}
> +
> +	dp_phy_node = of_find_node_by_phandle(be32_to_cpup(parp));
> +	if (!dp_phy_node) {
> +		dp->dp_phy_addr = NULL;
> +		return;
> +	}
> +
> +	of_property_read_u32(dp_phy_node, "samsung,dptx_phy_reg", &phy_base);
> +	of_property_read_u32(dp_phy_node, "samsung,enable_bit",
> +							&dp->enable_bit);
> +	virt_phy_base = ioremap(phy_base, SZ_4);
> +	if (!virt_phy_base) {
> +		dev_err(dp->dev, "failed to ioremap dp-phy\n");
> +		dp->dp_phy_addr = NULL;
> +		return;
> +	}
> +	dp->dp_phy_addr = virt_phy_base;
> +}
> +
> +void exynos_dp_phy_init(struct exynos_dp_device *dp)
> +{
> +	u32 reg;
> +
> +	reg = __raw_readl(dp->dp_phy_addr);
> +	reg |= dp->enable_bit;
> +	__raw_writel(reg, dp->dp_phy_addr);
> +}
> +
> +void exynos_dp_phy_exit(struct exynos_dp_device *dp)
> +{
> +	u32 reg;
> +
> +	reg = __raw_readl(dp->dp_phy_addr);
> +	reg &= ~(dp->enable_bit);
> +	__raw_writel(reg, dp->dp_phy_addr);
> +}
> +#endif /* CONFIG_OF */
> +
>  static int __devinit exynos_dp_probe(struct platform_device *pdev)
>  {
>  	struct resource *res;
> @@ -864,12 +965,6 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
> 
>  	int ret = 0;
> 
> -	pdata = pdev->dev.platform_data;
> -	if (!pdata) {
> -		dev_err(&pdev->dev, "no platform data\n");
> -		return -EINVAL;
> -	}
> -
>  	dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
>  				GFP_KERNEL);
>  	if (!dp) {
> @@ -879,6 +974,21 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
> 
>  	dp->dev = &pdev->dev;
> 
> +	if (pdev->dev.of_node) {
> +		pdata = exynos_dp_dt_parse_pdata(&pdev->dev);
> +		if (IS_ERR(pdata))
> +			return PTR_ERR(pdata);
> +
> +		exynos_dp_dt_parse_phydata(dp);
> +	} else {
> +		pdata = pdev->dev.platform_data;
> +	}
> +
> +	if (!pdata) {
> +		dev_err(&pdev->dev, "no platform data\n");
> +		return -EINVAL;
> +	}
> +
>  	dp->clock = devm_clk_get(&pdev->dev, "dp");
>  	if (IS_ERR(dp->clock)) {
>  		dev_err(&pdev->dev, "failed to get clock\n");
> @@ -909,8 +1019,14 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
>  	}
> 
>  	dp->video_info = pdata->video_info;
> -	if (pdata->phy_init)
> -		pdata->phy_init();
> +
> +	if (pdev->dev.of_node) {
> +		if (dp->dp_phy_addr)
> +			exynos_dp_phy_init(dp);
> +	} else {
> +		if (pdata->phy_init)
> +			pdata->phy_init();
> +	}
> 
>  	exynos_dp_init_dp(dp);
> 
> @@ -953,8 +1069,13 @@ static int __devexit exynos_dp_remove(struct platform_device *pdev)
>  	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
>  	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
> 
> -	if (pdata && pdata->phy_exit)
> -		pdata->phy_exit();
> +	if (pdev->dev.of_node) {
> +		if (dp->dp_phy_addr)
> +			exynos_dp_phy_exit(dp);
> +	} else {
> +		if (pdata && pdata->phy_exit)
> +			pdata->phy_exit();
> +	}
> 
>  	clk_disable(dp->clock);
> 
> @@ -968,8 +1089,13 @@ static int exynos_dp_suspend(struct device *dev)
>  	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
>  	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
> 
> -	if (pdata && pdata->phy_exit)
> -		pdata->phy_exit();
> +	if (dev->of_node) {
> +		if (dp->dp_phy_addr)
> +			exynos_dp_phy_exit(dp);
> +	} else {
> +		if (pdata && pdata->phy_exit)
> +			pdata->phy_exit();
> +	}
> 
>  	clk_disable(dp->clock);
> 
> @@ -982,8 +1108,13 @@ static int exynos_dp_resume(struct device *dev)
>  	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
>  	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
> 
> -	if (pdata && pdata->phy_init)
> -		pdata->phy_init();
> +	if (dev->of_node) {
> +		if (dp->dp_phy_addr)
> +			exynos_dp_phy_init(dp);
> +	} else {
> +		if (pdata && pdata->phy_init)
> +			pdata->phy_init();
> +	}
> 
>  	clk_enable(dp->clock);
> 
> @@ -1013,6 +1144,14 @@ static const struct dev_pm_ops exynos_dp_pm_ops = {
>  	SET_SYSTEM_SLEEP_PM_OPS(exynos_dp_suspend, exynos_dp_resume)
>  };
> 
> +#ifdef CONFIG_OF
> +static const struct of_device_id exynos_dp_match[] = {
> +	{ .compatible = "samsung,exynos5-dp" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, exynos_dp_match);
> +#endif
> +
>  static struct platform_driver exynos_dp_driver = {
>  	.probe		= exynos_dp_probe,
>  	.remove		= __devexit_p(exynos_dp_remove),
> @@ -1020,6 +1159,7 @@ static struct platform_driver exynos_dp_driver = {
>  		.name	= "exynos-dp",
>  		.owner	= THIS_MODULE,
>  		.pm	= &exynos_dp_pm_ops,
> +		.of_match_table = of_match_ptr(exynos_dp_match),
>  	},
>  };
> 
> diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
> index 57b8a65..c9f8c97 100644
> --- a/drivers/video/exynos/exynos_dp_core.h
> +++ b/drivers/video/exynos/exynos_dp_core.h
> @@ -29,6 +29,8 @@ struct exynos_dp_device {
>  	struct clk		*clock;
>  	unsigned int		irq;
>  	void __iomem		*reg_base;
> +	void __iomem		*dp_phy_addr;
> +	unsigned int		enable_bit;
> 
>  	struct video_info	*video_info;
>  	struct link_train	link_train;
> --
> 1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Video for Linux]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Tourism]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux