Hi Vaibhav,
On Fri, Sep 21, 2012 at 21:03:15, Hiremath, Vaibhav wrote:
> On Fri, Sep 21, 2012 at 20:54:48, Manjunathappa, Prakash wrote:
> > Add pm_runtime support to the da8xx-fb frame buffer driver.
> >
> > Signed-off-by: Manjunathappa, Prakash <prakash.pm@xxxxxx>
> > ---
> > Applies on top of patch "da8xx-fb: enable LCDC if FB is unblanked" under review.
> >
> > drivers/video/da8xx-fb.c | 24 +++++++++++++-----------
> > 1 files changed, 13 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
> > index af2aa38..17c00b2 100644
> > --- a/drivers/video/da8xx-fb.c
> > +++ b/drivers/video/da8xx-fb.c
> > @@ -26,6 +26,7 @@
> > #include <linux/device.h>
> > #include <linux/platform_device.h>
> > #include <linux/uaccess.h>
> > +#include <linux/pm_runtime.h>
> > #include <linux/interrupt.h>
> > #include <linux/wait.h>
> > #include <linux/clk.h>
> > @@ -1037,8 +1038,8 @@ static int __devexit fb_remove(struct platform_device *dev)
> > dma_free_coherent(NULL, par->vram_size, par->vram_virt,
> > par->vram_phys);
> > free_irq(par->irq, par);
> > - clk_disable(par->lcdc_clk);
> > - clk_put(par->lcdc_clk);
> > + pm_runtime_put_sync(&dev->dev);
> > + pm_runtime_disable(&dev->dev);
> > framebuffer_release(info);
> > iounmap((void __iomem *)da8xx_fb_reg_base);
> > release_mem_region(lcdc_regs->start, resource_size(lcdc_regs));
> > @@ -1272,9 +1273,9 @@ static int __devinit fb_probe(struct platform_device *device)
> > ret = -ENODEV;
> > goto err_ioremap;
> > }
> > - ret = clk_enable(fb_clk);
> > - if (ret)
> > - goto err_clk_put;
> > +
> > + pm_runtime_enable(&device->dev);
> > + pm_runtime_get_sync(&device->dev);
> >
> > /* Determine LCD IP Version */
> > switch (lcdc_read(LCD_PID_REG)) {
> > @@ -1302,7 +1303,7 @@ static int __devinit fb_probe(struct platform_device *device)
> > if (i == ARRAY_SIZE(known_lcd_panels)) {
> > dev_err(&device->dev, "GLCD: No valid panel found\n");
> > ret = -ENODEV;
> > - goto err_clk_disable;
> > + goto err_pm_runtime_disable;
> > } else
> > dev_info(&device->dev, "GLCD: Found %s panel\n",
> > fb_pdata->type);
> > @@ -1314,7 +1315,7 @@ static int __devinit fb_probe(struct platform_device *device)
> > if (!da8xx_fb_info) {
> > dev_dbg(&device->dev, "Memory allocation failed for fb_info\n");
> > ret = -ENOMEM;
> > - goto err_clk_disable;
> > + goto err_pm_runtime_disable;
> > }
> >
> > par = da8xx_fb_info->par;
> > @@ -1476,8 +1477,9 @@ err_release_fb_mem:
> > err_release_fb:
> > framebuffer_release(da8xx_fb_info);
> >
> > -err_clk_disable:
> > - clk_disable(fb_clk);
> > +err_pm_runtime_disable:
> > + pm_runtime_put_sync(&device->dev);
> > + pm_runtime_disable(&device->dev);
> >
> > err_clk_put:
> > clk_put(fb_clk);
> > @@ -1503,7 +1505,7 @@ static int fb_suspend(struct platform_device *dev, pm_message_t state)
> >
> > fb_set_suspend(info, 1);
> > lcd_disable_raster(true);
> > - clk_disable(par->lcdc_clk);
> > + pm_runtime_put(&dev->dev);
>
> Isn't here you should use pm_runtime_put_sync()??
>
Yes, I will correct it send next version.
Thanks,
Prakash
> Thanks,
> Vaibhv
>
> > console_unlock();
> >
> > return 0;
> > @@ -1514,7 +1516,7 @@ static int fb_resume(struct platform_device *dev)
> > struct da8xx_fb_par *par = info->par;
> >
> > console_lock();
> > - clk_enable(par->lcdc_clk);
> > + pm_runtime_get_sync(&dev->dev);
> > if (par->blank == FB_BLANK_UNBLANK) {
> > lcd_enable_raster();
> >
> > --
> > 1.7.0.4
> >
> > _______________________________________________
> > Davinci-linux-open-source mailing list
> > Davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx
> > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> >
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
