Hi Florian, Le 20/09/2012 18:33, Maxime Ripard a écrit : > This patch adds support for the Solomon SSD1307 OLED > controller found on the Crystalfontz CFA10036 board. > > This controller can drive a display with a resolution up > to 128x39 and can operate over I2C or SPI. > > The current driver has only been tested on the CFA-10036, > that is using this controller over I2C to driver a 96x16 > OLED screen. > > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> > Cc: Brian Lilly <brian@xxxxxxxxxxxxxxxx> Would you consider merging this patch or review it? It has been around for quite some time now and has not received any comments for at least the 2 last versions, so I guess there is not much left holding it back (unless, of course, if you have some comments to address), and I really would like to have it in 3.7. Thanks, Maxime -- Maxime Ripard, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
