Add support for device tree in the amba-clcd PL111 video driver.
Special case support is added for the A9 CoreTile which uses the "legacy"
address map and has a PL111 device on-board. The default case is to configure
the device on the motherboard.
Oscillator support is added for the A9 CoreTile's CLCD driver.
Signed-off-by: Ryan Harkin <ryan.harkin@xxxxxxxxxx>
---
arch/arm/mach-vexpress/v2m.c | 58 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 37608f2..799e00e 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -3,6 +3,7 @@
*/
#include <linux/device.h>
#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/init.h>
@@ -37,6 +38,7 @@
#include <mach/ct-ca9x4.h>
#include <mach/motherboard.h>
+#include <plat/clcd.h>
#include <plat/sched_clock.h>
#include "core.h"
@@ -541,6 +543,54 @@ MACHINE_END
#if defined(CONFIG_ARCH_VEXPRESS_DT)
+static struct v2m_osc v2m_dt_clcd_osc = {
+ .rate_min = 10000000,
+ .rate_max = 165000000,
+ .rate_default = 23750000,
+};
+
+static int v2m_dt_clcd_init(void)
+{
+ struct device_node *node;
+ u32 osc;
+ u32 clcd_site;
+ u32 dvimode;
+ const __be32 *prop;
+ int len, na, ns;
+ phys_addr_t reg_base;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,pl111");
+ if (!node)
+ return -ENODEV;
+
+ na = of_n_addr_cells(node);
+ ns = of_n_size_cells(node);
+
+ prop = of_get_property(node, "reg", &len);
+ if (WARN_ON(!prop || len < (na + ns) * sizeof(*prop)))
+ return -EINVAL;
+ reg_base = of_read_number(prop, na);
+
+ switch (reg_base) {
+ case CT_CA9X4_CLCDC:
+ clcd_site = v2m_get_master_site();
+ dvimode = 2;
+ break;
+ default:
+ clcd_site = SYS_CFG_SITE_MB;
+ dvimode = 0;
+ break;
+ }
+
+ if (of_property_read_u32(node, "arm,vexpress-osc", &osc) != 0)
+ return -EINVAL;
+ v2m_dt_clcd_osc.site = clcd_site;
+ v2m_dt_clcd_osc.osc = osc;
+ v2m_cfg_write(SYS_CFG_MUXFPGA | clcd_site, clcd_site);
+ v2m_cfg_write(SYS_CFG_DVIMODE | clcd_site, dvimode);
+ return 0;
+}
+
static struct map_desc v2m_rs1_io_desc __initdata = {
.virtual = V2M_PERIPH,
.pfn = __phys_to_pfn(0x1c000000),
@@ -598,6 +648,8 @@ void __init v2m_dt_init_early(void)
pr_warning("vexpress: DT HBI (%x) is not matching "
"hardware (%x)!\n", dt_hbi, hbi);
}
+
+ v2m_dt_clcd_init();
}
static struct of_device_id vexpress_irq_match[] __initdata = {
@@ -631,6 +683,12 @@ static void __init v2m_dt_timer_init(void)
if (arch_timer_sched_clock_init() != 0)
versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
+
+ if (v2m_dt_clcd_osc.site) {
+ /* core tile clcd controller for A9 */
+ clk = v2m_osc_register("10020000.clcd", &v2m_dt_clcd_osc);
+ clk_register_clkdev(clk, NULL, "10020000.clcd");
+ }
}
static struct sys_timer v2m_dt_timer = {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
