Writeback pipeline receives RGB data from one of the overlays or one of the
overlay managers. If the target color mode is YUV422 or NV12, we need to convert
the RGB pixels to YUV. The scalar in WB then converts it to the target color
mode.
Hence, the color conversion coefficients that need to be programmed are the ones
which convert a RGB24 pixel to YUV444. Program these coefficients for writeback
pipeline.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
drivers/video/omap2/dss/dispc.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 1623c9b..5811a18 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -681,20 +681,30 @@ static void dispc_plane_set_scale_coef(enum omap_plane plane, int fir_hinc,
static void _dispc_setup_color_conv_coef(void)
{
int i;
+ int num_ovl = dss_feat_get_num_ovls();
+ int num_wb = dss_feat_get_num_wbs();
+
const struct color_conv_coef {
int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
int full_range;
- } ctbl_bt601_5 = {
- 298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
+ } ctbl_bt601_5[2] = {
+ { 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, },
+ { 66, 112, -38, 129, -94, -74, 25, -18, 112, 0, },
};
const struct color_conv_coef *ct;
#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
+#define YUVTORGB 0
+#define RGBTOYUV 1
- ct = &ctbl_bt601_5;
+ ct = &ctbl_bt601_5[YUVTORGB];
+
+ for (i = 1; i < num_ovl + num_wb; i++) {
+
+ if (i >= num_ovl)
+ ct = &ctbl_bt601_5[RGBTOYUV];
- for (i = 1; i < dss_feat_get_num_ovls(); i++) {
dispc_write_reg(DISPC_OVL_CONV_COEF(i, 0),
CVAL(ct->rcr, ct->ry));
dispc_write_reg(DISPC_OVL_CONV_COEF(i, 1),
@@ -710,6 +720,8 @@ static void _dispc_setup_color_conv_coef(void)
11, 11);
}
+#undef RGBTOYUV
+#undef YUVTORGB
#undef CVAL
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
