The value of AUX channel differential amplitude current is changed from 8 mA to 16 mA, in order to increase AUX channel voltage level. In this case, AUX channel voltage level can be changed from 400 mV to 800 mV, when resistance between AUX TX and RX is 100 ohm. According to DP spec, although the normative voltage level is 390 mV, the informative voltage level is 430 mV. So, 800 mV can be helpful to improve voltage margin of AUX channel. Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx> --- drivers/video/exynos/exynos_dp_reg.c | 2 +- drivers/video/exynos/exynos_dp_reg.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/exynos/exynos_dp_reg.c b/drivers/video/exynos/exynos_dp_reg.c index 20e441f..5fd1214 100644 --- a/drivers/video/exynos/exynos_dp_reg.c +++ b/drivers/video/exynos/exynos_dp_reg.c @@ -77,7 +77,7 @@ void exynos_dp_init_analog_param(struct exynos_dp_device *dp) writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_3); reg = PD_RING_OSC | AUX_TERMINAL_CTRL_50_OHM | - TX_CUR1_2X | TX_CUR_8_MA; + TX_CUR1_2X | TX_CUR_16_MA; writel(reg, dp->reg_base + EXYNOS_DP_PLL_FILTER_CTL_1); reg = CH3_AMP_400_MV | CH2_AMP_400_MV | diff --git a/drivers/video/exynos/exynos_dp_reg.h b/drivers/video/exynos/exynos_dp_reg.h index 125b27c..0e79031 100644 --- a/drivers/video/exynos/exynos_dp_reg.h +++ b/drivers/video/exynos/exynos_dp_reg.h @@ -187,7 +187,7 @@ #define PD_RING_OSC (0x1 << 6) #define AUX_TERMINAL_CTRL_50_OHM (0x2 << 4) #define TX_CUR1_2X (0x1 << 2) -#define TX_CUR_8_MA (0x2 << 0) +#define TX_CUR_16_MA (0x3 << 0) /* EXYNOS_DP_TX_AMP_TUNING_CTL */ #define CH3_AMP_400_MV (0x0 << 24) -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
