Hi Florian,
Here are OMAP DSS changes for 3.6. The main changes are:
- Patches from Archit, which reorganize the output side of omapdss. This
is much cleaner in itself, but will also help us in the future to
implement the missing omap4 features and omap5+ features.
- LCD3 patches from Chandrabhanu, which implement the support for LCD3
overlay manager (for omap5). His patches also generalize the code which
accesses the overlay manager related registers.
There hasn't been new patches applied to the DSS tree for 3 weeks, as
I'm on vacation. The tree has been in linux-next for that period, and I
haven't received any complaints so I hope the stuff works quite well.
Archit also reported that he has tested the linux-next, and it seems to
work fine.
There is a small conflict, though. This was caused by the two fixes
"OMAPDSS: fix warnings if CONFIG_PM_RUNTIME=n" and "OMAPDSS: Use PM
notifiers for system suspend", as I had already applied them into my
master branch before Archit sent them for you. And as you fixed the code
formatting issue (sorry about that), we have a small conflict there.
The conflict is trivial to resolve, and I also pushed for-florian-merged
branch to the same git tree below, which has the conflict resolved.
I'm still on vacation for the next week, but I'll check my email every
now and then to see if there are any issues.
Tomi
The following changes since commit cfaf025112d3856637ff34a767ef785ef5cf2ca9:
Linux 3.5-rc2 (2012-06-08 18:40:09 -0700)
are available in the git repository at:
git://gitorious.org/linux-omap-dss2/linux.git for-florian
for you to fetch changes up to 974a65825e0b5fbda49605f0416a2c975d66e9e6:
Merge "Apply LCD manager related parameters" from Archit (2012-06-29 14:13:07 +0300)
----------------------------------------------------------------
Archit Taneja (27):
OMAPDSS: Remove passive matrix LCD support (part 1)
OMAPDSS: Remove passive matrix LCD support (part 2)
OMAPDSS: Remove passive matrix LCD support (part 3)
OMAPDSS: Remove passive matrix LCD support (part 4)
OMAPDSS: Add some new fields to omap_video_timings
OMAPDSS: DISPLAY: Ignore newly added omap_video_timings fields for display timings sysfs file
OMAPDSS: DISPC: Configure newly added omap_video_timing fields
OMAPDSS: DISPC: Remove dispc_mgr_set_pol_freq()
OMAPFB: Map the newly added omap_video_timings fields with fb sync flags
OMAPDSS: Remove omap_panel_config enum from omap_dss_device
OMAPDSS: Add interlace parameter to omap_video_timings
OMAPDSS: DISPC/APPLY: Use interlace info in manager timings for dispc_ovl_setup()
OMAPFB: Map interlace field in omap_video_timings with fb vmode flags
OMAPDSS: HDMI: Remove custom hdmi_video_timings struct
OMAPDSS: DSI: Fix HSYNC, VSYNC and DE polarities between DISPC and DSI
OMAPDSS: DISPC: Change return type of dispc_mgr_set_clock_div()
OMAPDSS: Add struct to hold LCD overlay manager configuration
OMAPDSS: DPI: Configure dss_lcd_mgr_config struct with lcd manager parameters
OMAPDSS: RFBI: Configure dss_lcd_mgr_config struct with lcd manager parameters
OMAPDSS: DSI: Configure dss_lcd_mgr_config struct with lcd manager parameters
OMAPDSS: SDI: Configure dss_lcd_mgr_config struct with lcd manager parameters
OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drivers
OMAPDSS: MANAGER: Check LCD related overlay manager parameters
OMAPDSS: APPLY: Remove usage of omap_dss_device from manual/auto update checks
OMAPDSS: DISPC: Remove a redundant function
OMAPDSS: RFBI: Use dss_mgr_enable to enable the overlay manager
OMAPDSS: OVERLAY: Clean up replication checking
Chandrabhanu Mahapatra (5):
OMAPDSS: Cleanup implementation of LCD channels
OMAPDSS: Add support for LCD3 channel
OMAPDSS: Add LCD3 overlay manager and Clock and IRQ support
OMAPDSS: Add dump and debug support for LCD3
ARM: OMAP2PLUS: DSS: Disable LCD3 output when resetting DSS
Jassi Brar (2):
OMAPDSS: HDMI: Discard phy_tx_enabled member
OMAPDSS: HDMI: Replace spinlock with mutex in hdmi_check_hpd_state
Peter Meerwald (1):
OMAPDSS: fix specification spelling in Kconfig
Rajendra Nayak (1):
OMAPDSS: add clk_prepare_enable and clk_disable_unprepare
Tomi Valkeinen (6):
Merge tag 'v3.5-rc2'
OMAPDSS: remove enum omap_dss_overlay_managers
OMAPDSS: Use PM notifiers for system suspend
OMAPDSS: fix warnings if CONFIG_PM_RUNTIME=n
Merge Misc DSS clean ups from Archit
Merge "Apply LCD manager related parameters" from Archit
arch/arm/mach-omap2/display.c | 29 +-
drivers/video/omap2/displays/panel-acx565akm.c | 10 +-
drivers/video/omap2/displays/panel-generic-dpi.c | 179 ++++---
.../omap2/displays/panel-lgphilips-lb035q02.c | 8 +-
drivers/video/omap2/displays/panel-n8x0.c | 1 -
.../omap2/displays/panel-nec-nl8048hl11-01b.c | 9 +-
drivers/video/omap2/displays/panel-picodlp.c | 9 +-
.../video/omap2/displays/panel-sharp-ls037v7dw01.c | 9 +-
drivers/video/omap2/displays/panel-taal.c | 3 +-
drivers/video/omap2/displays/panel-tfp410.c | 7 +-
.../video/omap2/displays/panel-tpo-td043mtea1.c | 8 +-
drivers/video/omap2/dss/Kconfig | 4 +-
drivers/video/omap2/dss/apply.c | 91 +++-
drivers/video/omap2/dss/core.c | 48 +-
drivers/video/omap2/dss/dispc.c | 496 ++++++++++----------
drivers/video/omap2/dss/dispc.h | 28 ++
drivers/video/omap2/dss/display.c | 40 +-
drivers/video/omap2/dss/dpi.c | 64 +--
drivers/video/omap2/dss/dsi.c | 156 +++---
drivers/video/omap2/dss/dss.c | 21 +-
drivers/video/omap2/dss/dss.h | 54 ++-
drivers/video/omap2/dss/dss_features.h | 5 +-
drivers/video/omap2/dss/hdmi.c | 248 ++++++++--
drivers/video/omap2/dss/hdmi_panel.c | 9 +-
drivers/video/omap2/dss/manager.c | 51 +-
drivers/video/omap2/dss/overlay.c | 33 +-
drivers/video/omap2/dss/rfbi.c | 42 +-
drivers/video/omap2/dss/sdi.c | 42 +-
drivers/video/omap2/dss/ti_hdmi.h | 21 +-
drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 26 +-
drivers/video/omap2/dss/venc.c | 10 +-
drivers/video/omap2/omapfb/omapfb-main.c | 51 +-
include/video/omapdss.h | 51 +-
33 files changed, 1172 insertions(+), 691 deletions(-)
Attachment:
signature.asc
Description: This is a digitally signed message part
