On Thu, 2012-06-28 at 14:10 +0300, Tomi Valkeinen wrote: > On Thu, 2012-06-28 at 16:28 +0530, Jassi Brar wrote: > > Sorry a correction. Reading detect() won't work. I suggest we keep HPD > > IRQ enabled for the lifetime of the driver. > > Ok, I see. But that's not acceptable. It would require us to keep the > TPD12S015 always powered and enabled. Even if you're not interested in > using HDMI at all. Btw, a bigger problem that I see is how we have to do read_edid() (and detect(), if I recall correctly): we enable the whole video pipeline and output. We should only enable enough of the HW to be able to read the EDID or read the HPD GPIO. I've noticed that this leads to sync losts quite easily, as we switch the hdmi output on and off quickly multiple times. I couldn't figure out why the sync losts happen though, and I did try quite many different combinations how to handle it. Tomi
Attachment:
signature.asc
Description: This is a digitally signed message part
