The AUO-K190X controllers share a very similar set of commands and
can therefore also share most of the driver code.
Signed-off-by: Heiko Stübner <heiko@xxxxxxxxx>
---
changes since v1: fix Kconfig (depends instead of select)
and catch possible runtime-pm mismatch.
drivers/video/Kconfig | 17 +
drivers/video/Makefile | 1 +
drivers/video/auo_k190x.c | 1046 +++++++++++++++++++++++++++++++++++++++++++
drivers/video/auo_k190x.h | 129 ++++++
include/video/auo_k190xfb.h | 106 +++++
5 files changed, 1299 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/auo_k190x.c
create mode 100644 drivers/video/auo_k190x.h
create mode 100644 include/video/auo_k190xfb.h
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a290be5..31c029b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2382,6 +2382,23 @@ config FB_BROADSHEET
and could also have been called by other names when coupled with
a bridge adapter.
+config FB_AUO_K190X
+ tristate "AUO-K190X EPD controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ Provides support for epaper controllers from the K190X series
+ of AUO. These controllers can be used to drive epaper displays
+ from Sipix.
+
+ This option enables the common support, shared by the individual
+ controller drivers. You will also have to enable the driver
+ for the controller type used in your device.
+
config FB_JZ4740
tristate "JZ4740 LCD framebuffer support"
depends on FB && MACH_JZ4740
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 9356add..d5406f2 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -118,6 +118,7 @@ obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
+obj-$(CONFIG_FB_AUO_K190X) += auo_k190x.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
new file mode 100644
index 0000000..94ba7e7
--- /dev/null
+++ b/drivers/video/auo_k190x.c
@@ -0,0 +1,1046 @@
+/*
+ * Common code for AUO-K190X framebuffer drivers
+ *
+ * Copyright (C) 2012 Heiko Stuebner <heiko@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/auo_k190xfb.h>
+
+#include "auo_k190x.h"
+
+struct panel_info {
+ int w;
+ int h;
+};
+
+/* table of panel specific parameters to be indexed into by the board drivers */
+static struct panel_info panel_table[] = {
+ /* standard 6" */
+ [AUOK190X_RESOLUTION_800_600] = {
+ .w = 800,
+ .h = 600,
+ },
+ /* standard 9" */
+ [AUOK190X_RESOLUTION_1024_768] = {
+ .w = 1024,
+ .h = 768,
+ },
+};
+
+/*
+ * private I80 interface to the board driver
+ */
+
+static void auok190x_issue_data(struct auok190xfb_par *par, u16 data)
+{
+ par->board->set_ctl(par, AUOK190X_I80_WR, 0);
+ par->board->set_hdb(par, data);
+ par->board->set_ctl(par, AUOK190X_I80_WR, 1);
+}
+
+static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data)
+{
+ par->board->set_ctl(par, AUOK190X_I80_DC, 0);
+ auok190x_issue_data(par, data);
+ par->board->set_ctl(par, AUOK190X_I80_DC, 1);
+}
+
+static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
+ u16 *data)
+{
+ struct device *dev = par->info->device;
+ int i;
+ u16 tmp;
+
+ if (size & 3) {
+ dev_err(dev, "issue_pixels: size %d must be a multiple of 4\n",
+ size);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < (size >> 1); i++) {
+ par->board->set_ctl(par, AUOK190X_I80_WR, 0);
+
+ /* simple reduction of 8bit staticgray to 4bit gray
+ * combines 4 * 4bit pixel values into a 16bit value
+ */
+ tmp = (data[2*i] & 0xF0) >> 4;
+ tmp |= (data[2*i] & 0xF000) >> 8;
+ tmp |= (data[2*i+1] & 0xF0) << 4;
+ tmp |= (data[2*i+1] & 0xF000);
+
+ par->board->set_hdb(par, tmp);
+ par->board->set_ctl(par, AUOK190X_I80_WR, 1);
+ }
+
+ return 0;
+}
+
+static u16 auok190x_read_data(struct auok190xfb_par *par)
+{
+ u16 data;
+
+ par->board->set_ctl(par, AUOK190X_I80_OE, 0);
+ data = par->board->get_hdb(par);
+ par->board->set_ctl(par, AUOK190X_I80_OE, 1);
+
+ return data;
+}
+
+/*
+ * Command interface for the controller drivers
+ */
+
+void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data)
+{
+ par->board->set_ctl(par, AUOK190X_I80_CS, 0);
+ auok190x_issue_cmd(par, data);
+ par->board->set_ctl(par, AUOK190X_I80_CS, 1);
+}
+EXPORT_SYMBOL_GPL(auok190x_send_command_nowait);
+
+void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd,
+ int argc, u16 *argv)
+{
+ int i;
+
+ par->board->set_ctl(par, AUOK190X_I80_CS, 0);
+ auok190x_issue_cmd(par, cmd);
+
+ for (i = 0; i < argc; i++)
+ auok190x_issue_data(par, argv[i]);
+ par->board->set_ctl(par, AUOK190X_I80_CS, 1);
+}
+EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_nowait);
+
+int auok190x_send_command(struct auok190xfb_par *par, u16 data)
+{
+ int ret;
+
+ ret = par->board->wait_for_rdy(par);
+ if (ret)
+ return ret;
+
+ auok190x_send_command_nowait(par, data);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(auok190x_send_command);
+
+int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd,
+ int argc, u16 *argv)
+{
+ int ret;
+
+ ret = par->board->wait_for_rdy(par);
+ if (ret)
+ return ret;
+
+ auok190x_send_cmdargs_nowait(par, cmd, argc, argv);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(auok190x_send_cmdargs);
+
+int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd,
+ int argc, u16 *argv)
+{
+ int i, ret;
+
+ ret = par->board->wait_for_rdy(par);
+ if (ret)
+ return ret;
+
+ par->board->set_ctl(par, AUOK190X_I80_CS, 0);
+ auok190x_issue_cmd(par, cmd);
+
+ for (i = 0; i < argc; i++)
+ argv[i] = auok190x_read_data(par);
+ par->board->set_ctl(par, AUOK190X_I80_CS, 1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(auok190x_read_cmdargs);
+
+void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par, u16 cmd,
+ int argc, u16 *argv, int size, u16 *data)
+{
+ int i;
+
+ par->board->set_ctl(par, AUOK190X_I80_CS, 0);
+
+ auok190x_issue_cmd(par, cmd);
+
+ for (i = 0; i < argc; i++)
+ auok190x_issue_data(par, argv[i]);
+
+ auok190x_issue_pixels(par, size, data);
+
+ par->board->set_ctl(par, AUOK190X_I80_CS, 1);
+}
+EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels_nowait);
+
+int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd,
+ int argc, u16 *argv, int size, u16 *data)
+{
+ int ret;
+
+ ret = par->board->wait_for_rdy(par);
+ if (ret)
+ return ret;
+
+ auok190x_send_cmdargs_pixels_nowait(par, cmd, argc, argv, size, data);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels);
+
+/*
+ * fbdefio callbacks - common on both controllers.
+ */
+
+static void auok190xfb_dpy_first_io(struct fb_info *info)
+{
+ /* tell runtime-pm that we wish to use the device in a short time */
+ pm_runtime_get(info->device);
+}
+
+/* this is called back from the deferred io workqueue */
+static void auok190xfb_dpy_deferred_io(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ struct fb_deferred_io *fbdefio = info->fbdefio;
+ struct auok190xfb_par *par = info->par;
+ u16 yres = info->var.yres;
+ u16 xres = info->var.xres;
+ u16 y1 = 0, h = 0;
+ int prev_index = -1;
+ struct page *cur;
+ int h_inc;
+ int threshold;
+
+ if (!list_empty(pagelist))
+ /* the device resume should've been requested through first_io,
+ * if the resume did not finish until now, wait for it.
+ */
+ pm_runtime_barrier(info->device);
+ else
+ /* We reached this via the fsync or some other way.
+ * In either case the first_io function did not run,
+ * so we runtime_resume the device here synchronously.
+ */
+ pm_runtime_get_sync(info->device);
+
+ /* Do a full screen update every n updates to prevent
+ * excessive darkening of the Sipix display.
+ * If we do this, there is no need to walk the pages.
+ */
+ if (par->need_refresh(par)) {
+ par->update_all(par);
+ goto out;
+ }
+
+ /* height increment is fixed per page */
+ h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
+
+ /* calculate number of pages from pixel height */
+ threshold = par->consecutive_threshold / h_inc;
+ if (threshold < 1)
+ threshold = 1;
+
+ /* walk the written page list and swizzle the data */
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ if (prev_index < 0) {
+ /* just starting so assign first page */
+ y1 = (cur->index << PAGE_SHIFT) / xres;
+ h = h_inc;
+ } else if ((cur->index - prev_index) <= threshold) {
+ /* page is within our threshold for single updates */
+ h += h_inc * (cur->index - prev_index);
+ } else {
+ /* page not consecutive, issue previous update first */
+ par->update_partial(par, y1, y1 + h);
+
+ /* start over with our non consecutive page */
+ y1 = (cur->index << PAGE_SHIFT) / xres;
+ h = h_inc;
+ }
+ prev_index = cur->index;
+ }
+
+ /* if we still have any pages to update we do so now */
+ if (h >= yres)
+ /* its a full screen update, just do it */
+ par->update_all(par);
+ else
+ par->update_partial(par, y1, min((u16) (y1 + h), yres));
+
+out:
+ pm_runtime_mark_last_busy(info->device);
+ pm_runtime_put_autosuspend(info->device);
+}
+
+/*
+ * framebuffer operations
+ */
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw
+ */
+static ssize_t auok190xfb_write(struct fb_info *info, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct auok190xfb_par *par = info->par;
+ unsigned long p = *ppos;
+ void *dst;
+ int err = 0;
+ unsigned long total_size;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return -EPERM;
+
+ total_size = info->fix.smem_len;
+
+ if (p > total_size)
+ return -EFBIG;
+
+ if (count > total_size) {
+ err = -EFBIG;
+ count = total_size;
+ }
+
+ if (count + p > total_size) {
+ if (!err)
+ err = -ENOSPC;
+
+ count = total_size - p;
+ }
+
+ dst = (void *)(info->screen_base + p);
+
+ if (copy_from_user(dst, buf, count))
+ err = -EFAULT;
+
+ if (!err)
+ *ppos += count;
+
+ par->update_all(par);
+
+ return (err) ? err : count;
+}
+
+static void auok190xfb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ struct auok190xfb_par *par = info->par;
+
+ sys_fillrect(info, rect);
+
+ par->update_all(par);
+}
+
+static void auok190xfb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ struct auok190xfb_par *par = info->par;
+
+ sys_copyarea(info, area);
+
+ par->update_all(par);
+}
+
+static void auok190xfb_imageblit(struct fb_info *info,
+ const struct fb_image *image)
+{
+ struct auok190xfb_par *par = info->par;
+
+ sys_imageblit(info, image);
+
+ par->update_all(par);
+}
+
+static int auok190xfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ if (info->var.xres != var->xres || info->var.yres != var->yres ||
+ info->var.xres_virtual != var->xres_virtual ||
+ info->var.yres_virtual != var->yres_virtual) {
+ pr_info("%s: Resolution not supported: X%u x Y%u\n",
+ __func__, var->xres, var->yres);
+ return -EINVAL;
+ }
+
+ /*
+ * Memory limit
+ */
+
+ if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
+ pr_info("%s: Memory Limit requested yres_virtual = %u\n",
+ __func__, var->yres_virtual);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static struct fb_ops auok190xfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_read = fb_sys_read,
+ .fb_write = auok190xfb_write,
+ .fb_fillrect = auok190xfb_fillrect,
+ .fb_copyarea = auok190xfb_copyarea,
+ .fb_imageblit = auok190xfb_imageblit,
+ .fb_check_var = auok190xfb_check_var,
+};
+
+/*
+ * Controller-functions common to both K1900 and K1901
+ */
+
+static int auok190x_read_temperature(struct auok190xfb_par *par)
+{
+ struct device *dev = par->info->device;
+ u16 data[4];
+ int temp;
+
+ pm_runtime_get_sync(dev);
+
+ mutex_lock(&(par->io_lock));
+
+ auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data);
+
+ mutex_unlock(&(par->io_lock));
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ /* sanitize and split of half-degrees for now */
+ temp = ((data[0] & AUOK190X_VERSION_TEMP_MASK) >> 1);
+
+ /* handle positive and negative temperatures */
+ if (temp >= 201)
+ return (255 - temp + 1) * (-1);
+ else
+ return temp;
+}
+
+static void auok190x_identify(struct auok190xfb_par *par)
+{
+ struct device *dev = par->info->device;
+ u16 data[4];
+
+ pm_runtime_get_sync(dev);
+
+ mutex_lock(&(par->io_lock));
+
+ auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data);
+
+ mutex_unlock(&(par->io_lock));
+
+ par->epd_type = data[1] & AUOK190X_VERSION_TEMP_MASK;
+
+ par->panel_size_int = AUOK190X_VERSION_SIZE_INT(data[2]);
+ par->panel_size_float = AUOK190X_VERSION_SIZE_FLOAT(data[2]);
+ par->panel_model = AUOK190X_VERSION_MODEL(data[2]);
+
+ par->tcon_version = AUOK190X_VERSION_TCON(data[3]);
+ par->lut_version = AUOK190X_VERSION_LUT(data[3]);
+
+ dev_dbg(dev, "panel %d.%din, model 0x%x, EPD 0x%x TCON-rev 0x%x, LUT-rev 0x%x",
+ par->panel_size_int, par->panel_size_float, par->panel_model,
+ par->epd_type, par->tcon_version, par->lut_version);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+}
+
+/*
+ * Sysfs functions
+ */
+
+static ssize_t update_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct auok190xfb_par *par = info->par;
+
+ return sprintf(buf, "%d\n", par->update_mode);
+}
+
+static ssize_t update_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct auok190xfb_par *par = info->par;
+ int mode, ret;
+
+ ret = kstrtoint(buf, 10, &mode);
+ if (ret)
+ return ret;
+
+ par->update_mode = mode;
+
+ /* if we enter a better mode, do a full update */
+ if (par->last_mode > 1 && mode < par->last_mode)
+ par->update_all(par);
+
+ return count;
+}
+
+static ssize_t flash_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct auok190xfb_par *par = info->par;
+
+ return sprintf(buf, "%d\n", par->flash);
+}
+
+static ssize_t flash_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct auok190xfb_par *par = info->par;
+ int flash, ret;
+
+ ret = kstrtoint(buf, 10, &flash);
+ if (ret)
+ return ret;
+
+ if (flash > 0)
+ par->flash = 1;
+ else
+ par->flash = 0;
+
+ return count;
+}
+
+static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct auok190xfb_par *par = info->par;
+ int temp;
+
+ temp = auok190x_read_temperature(par);
+ return sprintf(buf, "%d\n", temp);
+}
+
+static DEVICE_ATTR(update_mode, 0644, update_mode_show, update_mode_store);
+static DEVICE_ATTR(flash, 0644, flash_show, flash_store);
+static DEVICE_ATTR(temp, 0644, temp_show, NULL);
+
+static struct attribute *auok190x_attributes[] = {
+ &dev_attr_update_mode.attr,
+ &dev_attr_flash.attr,
+ &dev_attr_temp.attr,
+ NULL
+};
+
+static const struct attribute_group auok190x_attr_group = {
+ .attrs = auok190x_attributes,
+};
+
+static int auok190x_power(struct auok190xfb_par *par, bool on)
+{
+ struct auok190x_board *board = par->board;
+ int ret;
+
+ if (on) {
+ /* We should maintain POWER up for at least 80ms before set
+ * RST_N and SLP_N to high (TCON spec 20100803_v35 p59)
+ */
+ ret = regulator_enable(par->regulator);
+ if (ret)
+ return ret;
+
+ msleep(200);
+ gpio_set_value(board->gpio_nrst, 1);
+ gpio_set_value(board->gpio_nsleep, 1);
+ msleep(200);
+ } else {
+ regulator_disable(par->regulator);
+ gpio_set_value(board->gpio_nrst, 0);
+ gpio_set_value(board->gpio_nsleep, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * Recovery - powercycle the controller
+ */
+
+static void auok190x_recover(struct auok190xfb_par *par)
+{
+ auok190x_power(par, 0);
+ msleep(100);
+ auok190x_power(par, 1);
+
+ par->init(par);
+
+ /* wait for init to complete */
+ par->board->wait_for_rdy(par);
+}
+
+/*
+ * Power-management
+ */
+
+#ifdef CONFIG_PM
+static int auok190x_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fb_info *info = platform_get_drvdata(pdev);
+ struct auok190xfb_par *par = info->par;
+ struct auok190x_board *board = par->board;
+ u16 standby_param;
+
+ /* take and keep the lock until we are resumed, as the controller
+ * will never reach the non-busy state when in standby mode
+ */
+ mutex_lock(&(par->io_lock));
+
+ if (par->standby) {
+ dev_warn(dev, "already in standby, runtime-pm pairing mismatch\n");
+ mutex_unlock(&(par->io_lock));
+ return 0;
+ }
+
+ /* according to runtime_pm.txt runtime_suspend only means, that the
+ * device will not process data and will not communicate with the CPU
+ * As we hold the lock, this stays true even without standby
+ */
+ if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
+ dev_dbg(dev, "runtime suspend without standby\n");
+ goto finish;
+ } else if (board->quirks & AUOK190X_QUIRK_STANDBYPARAM) {
+ /* for some TCON versions STANDBY expects a parameter (0) but
+ * it seems the real tcon version has to be determined yet.
+ */
+ dev_dbg(dev, "runtime suspend with additional empty param\n");
+ standby_param = 0;
+ auok190x_send_cmdargs(par, AUOK190X_CMD_STANDBY, 1,
+ &standby_param);
+ } else {
+ dev_dbg(dev, "runtime suspend without param\n");
+ auok190x_send_command(par, AUOK190X_CMD_STANDBY);
+ }
+
+ msleep(64);
+
+finish:
+ par->standby = 1;
+
+ return 0;
+}
+
+static int auok190x_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fb_info *info = platform_get_drvdata(pdev);
+ struct auok190xfb_par *par = info->par;
+ struct auok190x_board *board = par->board;
+
+ if (!par->standby) {
+ dev_warn(dev, "not in standby, runtime-pm pairing mismatch\n");
+ return 0;
+ }
+
+ if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
+ dev_dbg(dev, "runtime resume without standby\n");
+ } else {
+ /* when in standby, controller is always busy
+ * and only accepts the wakeup command
+ */
+ dev_dbg(dev, "runtime resume from standby\n");
+ auok190x_send_command_nowait(par, AUOK190X_CMD_WAKEUP);
+
+ msleep(160);
+
+ /* wait for the controller to be ready and release the lock */
+ board->wait_for_rdy(par);
+ }
+
+ par->standby = 0;
+
+ mutex_unlock(&(par->io_lock));
+
+ return 0;
+}
+
+static int auok190x_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fb_info *info = platform_get_drvdata(pdev);
+ struct auok190xfb_par *par = info->par;
+ struct auok190x_board *board = par->board;
+ int ret;
+
+ dev_dbg(dev, "suspend\n");
+ if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
+ /* suspend via powering off the ic */
+ dev_dbg(dev, "suspend with broken standby\n");
+
+ auok190x_power(par, 0);
+ } else {
+ dev_dbg(dev, "suspend using sleep\n");
+
+ /* the sleep state can only be entered from the standby state.
+ * pm_runtime_get_noresume gets called before the suspend call.
+ * So the devices usage count is >0 but it is not necessarily
+ * active.
+ */
+ if (!pm_runtime_status_suspended(dev)) {
+ ret = auok190x_runtime_suspend(dev);
+ if (ret < 0) {
+ dev_err(dev, "auok190x_runtime_suspend failed with %d\n",
+ ret);
+ return ret;
+ }
+ par->manual_standby = 1;
+ }
+
+ gpio_direction_output(board->gpio_nsleep, 0);
+ }
+
+ msleep(100);
+
+ return 0;
+}
+
+static int auok190x_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fb_info *info = platform_get_drvdata(pdev);
+ struct auok190xfb_par *par = info->par;
+ struct auok190x_board *board = par->board;
+
+ dev_dbg(dev, "resume\n");
+ if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
+ dev_dbg(dev, "resume with broken standby\n");
+
+ auok190x_power(par, 1);
+
+ par->init(par);
+ } else {
+ dev_dbg(dev, "resume from sleep\n");
+
+ /* device should be in runtime suspend when we were suspended
+ * and pm_runtime_put_sync gets called after this function.
+ * So there is no need to touch the standby mode here at all.
+ */
+ gpio_direction_output(board->gpio_nsleep, 1);
+ msleep(100);
+
+ /* an additional init call seems to be necessary after sleep */
+ auok190x_runtime_resume(dev);
+ par->init(par);
+
+ /* if we were runtime-suspended before, suspend again*/
+ if (!par->manual_standby)
+ auok190x_runtime_suspend(dev);
+ else
+ par->manual_standby = 0;
+ }
+
+ return 0;
+}
+#endif
+
+const struct dev_pm_ops auok190x_pm = {
+ SET_RUNTIME_PM_OPS(auok190x_runtime_suspend, auok190x_runtime_resume,
+ NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(auok190x_suspend, auok190x_resume)
+};
+EXPORT_SYMBOL_GPL(auok190x_pm);
+
+/*
+ * Common probe and remove code
+ */
+
+int __devinit auok190x_common_probe(struct platform_device *pdev,
+ struct auok190x_init_data *init)
+{
+ struct auok190x_board *board = init->board;
+ struct auok190xfb_par *par;
+ struct fb_info *info;
+ struct panel_info *panel;
+ int videomemorysize, ret;
+ unsigned char *videomemory;
+
+ /* check board contents */
+ if (!board->init || !board->cleanup || !board->wait_for_rdy
+ || !board->set_ctl || !board->set_hdb || !board->get_hdb
+ || !board->setup_irq)
+ return -EINVAL;
+
+ info = framebuffer_alloc(sizeof(struct auok190xfb_par), &pdev->dev);
+ if (!info)
+ return -ENOMEM;
+
+ par = info->par;
+ par->info = info;
+ par->board = board;
+ par->recover = auok190x_recover;
+ par->update_partial = init->update_partial;
+ par->update_all = init->update_all;
+ par->need_refresh = init->need_refresh;
+ par->init = init->init;
+
+ /* init update modes */
+ par->update_cnt = 0;
+ par->update_mode = -1;
+ par->last_mode = -1;
+ par->flash = 0;
+
+ par->regulator = regulator_get(info->device, "vdd");
+ if (IS_ERR(par->regulator)) {
+ ret = PTR_ERR(par->regulator);
+ dev_err(info->device, "Failed to get regulator: %d\n", ret);
+ goto err_reg;
+ }
+
+ ret = board->init(par);
+ if (ret) {
+ dev_err(info->device, "board init failed, %d\n", ret);
+ goto err_board;
+ }
+
+ ret = gpio_request(board->gpio_nsleep, "AUOK190x sleep");
+ if (ret) {
+ dev_err(info->device, "could not request sleep gpio, %d\n",
+ ret);
+ goto err_gpio1;
+ }
+
+ ret = gpio_direction_output(board->gpio_nsleep, 0);
+ if (ret) {
+ dev_err(info->device, "could not set sleep gpio, %d\n", ret);
+ goto err_gpio2;
+ }
+
+ ret = gpio_request(board->gpio_nrst, "AUOK190x reset");
+ if (ret) {
+ dev_err(info->device, "could not request reset gpio, %d\n",
+ ret);
+ goto err_gpio2;
+ }
+
+ ret = gpio_direction_output(board->gpio_nrst, 0);
+ if (ret) {
+ dev_err(info->device, "could not set reset gpio, %d\n", ret);
+ goto err_gpio3;
+ }
+
+ ret = auok190x_power(par, 1);
+ if (ret) {
+ dev_err(info->device, "could not power on the device, %d\n",
+ ret);
+ goto err_gpio3;
+ }
+
+ mutex_init(&par->io_lock);
+
+ init_waitqueue_head(&par->waitq);
+
+ ret = par->board->setup_irq(par->info);
+ if (ret) {
+ dev_err(info->device, "could not setup ready-irq, %d\n", ret);
+ goto err_irq;
+ }
+
+ /* wait for init to complete */
+ par->board->wait_for_rdy(par);
+
+ /*
+ * From here on the controller can talk to us
+ */
+
+ /* initialise fix, var, resolution and rotation */
+
+ strlcpy(info->fix.id, init->id, 16);
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
+ info->fix.xpanstep = 0;
+ info->fix.ypanstep = 0;
+ info->fix.ywrapstep = 0;
+ info->fix.accel = FB_ACCEL_NONE;
+
+ info->var.bits_per_pixel = 8;
+ info->var.grayscale = 1;
+ info->var.red.length = 8;
+ info->var.green.length = 8;
+ info->var.blue.length = 8;
+
+ panel = &panel_table[board->resolution];
+
+ /* if 90 degree rotation, switch width and height */
+ if (board->rotation & 1) {
+ info->var.xres = panel->h;
+ info->var.yres = panel->w;
+ info->var.xres_virtual = panel->h;
+ info->var.yres_virtual = panel->w;
+ info->fix.line_length = panel->h;
+ } else {
+ info->var.xres = panel->w;
+ info->var.yres = panel->h;
+ info->var.xres_virtual = panel->w;
+ info->var.yres_virtual = panel->h;
+ info->fix.line_length = panel->w;
+ }
+
+ par->resolution = board->resolution;
+ par->rotation = board->rotation;
+
+ /* videomemory handling */
+
+ videomemorysize = roundup((panel->w * panel->h), PAGE_SIZE);
+ videomemory = vmalloc(videomemorysize);
+ if (!videomemory) {
+ ret = -ENOMEM;
+ goto err_irq;
+ }
+
+ memset(videomemory, 0, videomemorysize);
+ info->screen_base = (char *)videomemory;
+ info->fix.smem_len = videomemorysize;
+
+ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
+ info->fbops = &auok190xfb_ops;
+
+ /* deferred io init */
+
+ info->fbdefio = devm_kzalloc(info->device,
+ sizeof(struct fb_deferred_io),
+ GFP_KERNEL);
+ if (!info->fbdefio) {
+ dev_err(info->device, "Failed to allocate memory\n");
+ ret = -ENOMEM;
+ goto err_defio;
+ }
+
+ dev_dbg(info->device, "targetting %d frames per second\n", board->fps);
+ info->fbdefio->delay = HZ / board->fps;
+ info->fbdefio->first_io = auok190xfb_dpy_first_io,
+ info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io,
+ fb_deferred_io_init(info);
+
+ /* color map */
+
+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (ret < 0) {
+ dev_err(info->device, "Failed to allocate colormap\n");
+ goto err_cmap;
+ }
+
+ /* controller init */
+
+ par->consecutive_threshold = 100;
+ par->init(par);
+ auok190x_identify(par);
+
+ platform_set_drvdata(pdev, info);
+
+ ret = register_framebuffer(info);
+ if (ret < 0)
+ goto err_regfb;
+
+ ret = sysfs_create_group(&info->device->kobj, &auok190x_attr_group);
+ if (ret)
+ goto err_sysfs;
+
+ dev_info(info->device, "fb%d: %dx%d using %dK of video memory\n",
+ info->node, info->var.xres, info->var.yres,
+ videomemorysize >> 10);
+
+ /* increase autosuspend_delay when we use alternative methods
+ * for runtime_pm
+ */
+ par->autosuspend_delay = (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN)
+ ? 1000 : 200;
+
+ pm_runtime_set_active(info->device);
+ pm_runtime_enable(info->device);
+ pm_runtime_set_autosuspend_delay(info->device, par->autosuspend_delay);
+ pm_runtime_use_autosuspend(info->device);
+
+ return 0;
+
+err_sysfs:
+ unregister_framebuffer(info);
+err_regfb:
+ fb_dealloc_cmap(&info->cmap);
+err_cmap:
+ fb_deferred_io_cleanup(info);
+ kfree(info->fbdefio);
+err_defio:
+ vfree((void *)info->screen_base);
+err_irq:
+ auok190x_power(par, 0);
+err_gpio3:
+ gpio_free(board->gpio_nrst);
+err_gpio2:
+ gpio_free(board->gpio_nsleep);
+err_gpio1:
+ board->cleanup(par);
+err_board:
+ regulator_put(par->regulator);
+err_reg:
+ framebuffer_release(info);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(auok190x_common_probe);
+
+int __devexit auok190x_common_remove(struct platform_device *pdev)
+{
+ struct fb_info *info = platform_get_drvdata(pdev);
+ struct auok190xfb_par *par = info->par;
+ struct auok190x_board *board = par->board;
+
+ pm_runtime_disable(info->device);
+
+ sysfs_remove_group(&info->device->kobj, &auok190x_attr_group);
+
+ unregister_framebuffer(info);
+
+ fb_dealloc_cmap(&info->cmap);
+
+ fb_deferred_io_cleanup(info);
+ kfree(info->fbdefio);
+
+ vfree((void *)info->screen_base);
+
+ auok190x_power(par, 0);
+
+ gpio_free(board->gpio_nrst);
+ gpio_free(board->gpio_nsleep);
+
+ board->cleanup(par);
+
+ regulator_put(par->regulator);
+
+ framebuffer_release(info);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(auok190x_common_remove);
+
+MODULE_DESCRIPTION("Common code for AUO-K190X controllers");
+MODULE_AUTHOR("Heiko Stuebner <heiko@xxxxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/auo_k190x.h b/drivers/video/auo_k190x.h
new file mode 100644
index 0000000..e35af1f
--- /dev/null
+++ b/drivers/video/auo_k190x.h
@@ -0,0 +1,129 @@
+/*
+ * Private common definitions for AUO-K190X framebuffer drivers
+ *
+ * Copyright (C) 2012 Heiko Stuebner <heiko@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * I80 interface specific defines
+ */
+
+#define AUOK190X_I80_CS 0x01
+#define AUOK190X_I80_DC 0x02
+#define AUOK190X_I80_WR 0x03
+#define AUOK190X_I80_OE 0x04
+
+/*
+ * AUOK190x commands, common to both controllers
+ */
+
+#define AUOK190X_CMD_INIT 0x0000
+#define AUOK190X_CMD_STANDBY 0x0001
+#define AUOK190X_CMD_WAKEUP 0x0002
+#define AUOK190X_CMD_TCON_RESET 0x0003
+#define AUOK190X_CMD_DATA_STOP 0x1002
+#define AUOK190X_CMD_LUT_START 0x1003
+#define AUOK190X_CMD_DISP_REFRESH 0x1004
+#define AUOK190X_CMD_DISP_RESET 0x1005
+#define AUOK190X_CMD_PRE_DISPLAY_START 0x100D
+#define AUOK190X_CMD_PRE_DISPLAY_STOP 0x100F
+#define AUOK190X_CMD_FLASH_W 0x2000
+#define AUOK190X_CMD_FLASH_E 0x2001
+#define AUOK190X_CMD_FLASH_STS 0x2002
+#define AUOK190X_CMD_FRAMERATE 0x3000
+#define AUOK190X_CMD_READ_VERSION 0x4000
+#define AUOK190X_CMD_READ_STATUS 0x4001
+#define AUOK190X_CMD_READ_LUT 0x4003
+#define AUOK190X_CMD_DRIVERTIMING 0x5000
+#define AUOK190X_CMD_LBALANCE 0x5001
+#define AUOK190X_CMD_AGINGMODE 0x6000
+#define AUOK190X_CMD_AGINGEXIT 0x6001
+
+/*
+ * Common settings for AUOK190X_CMD_INIT
+ */
+
+#define AUOK190X_INIT_DATA_FILTER (0 << 12)
+#define AUOK190X_INIT_DATA_BYPASS (1 << 12)
+#define AUOK190X_INIT_INVERSE_WHITE (0 << 9)
+#define AUOK190X_INIT_INVERSE_BLACK (1 << 9)
+#define AUOK190X_INIT_SCAN_DOWN (0 << 1)
+#define AUOK190X_INIT_SCAN_UP (1 << 1)
+#define AUOK190X_INIT_SHIFT_LEFT (0 << 0)
+#define AUOK190X_INIT_SHIFT_RIGHT (1 << 0)
+
+/* Common bits to pixels
+ * Mode 15-12 11-8 7-4 3-0
+ * format0 4 3 2 1
+ * format1 3 4 1 2
+ */
+
+#define AUOK190X_INIT_FORMAT0 0
+#define AUOK190X_INIT_FORMAT1 (1 << 6)
+
+/*
+ * settings for AUOK190X_CMD_RESET
+ */
+
+#define AUOK190X_RESET_TCON (0 << 0)
+#define AUOK190X_RESET_NORMAL (1 << 0)
+#define AUOK190X_RESET_PON (1 << 1)
+
+/*
+ * AUOK190X_CMD_VERSION
+ */
+
+#define AUOK190X_VERSION_TEMP_MASK (0x1ff)
+#define AUOK190X_VERSION_EPD_MASK (0xff)
+#define AUOK190X_VERSION_SIZE_INT(_val) ((_val & 0xfc00) >> 10)
+#define AUOK190X_VERSION_SIZE_FLOAT(_val) ((_val & 0x3c0) >> 6)
+#define AUOK190X_VERSION_MODEL(_val) (_val & 0x3f)
+#define AUOK190X_VERSION_LUT(_val) (_val & 0xff)
+#define AUOK190X_VERSION_TCON(_val) ((_val & 0xff00) >> 8)
+
+/*
+ * update modes for CMD_PARTIALDISP on K1900 and CMD_DDMA on K1901
+ */
+
+#define AUOK190X_UPDATE_MODE(_res) ((_res & 0x7) << 12)
+#define AUOK190X_UPDATE_NONFLASH (1 << 15)
+
+/*
+ * track panel specific parameters for common init
+ */
+
+struct auok190x_init_data {
+ char *id;
+ struct auok190x_board *board;
+
+ void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2);
+ void (*update_all)(struct auok190xfb_par *par);
+ bool (*need_refresh)(struct auok190xfb_par *par);
+ void (*init)(struct auok190xfb_par *par);
+};
+
+
+extern void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data);
+extern int auok190x_send_command(struct auok190xfb_par *par, u16 data);
+extern void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd,
+ int argc, u16 *argv);
+extern int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd,
+ int argc, u16 *argv);
+extern void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par,
+ u16 cmd, int argc, u16 *argv,
+ int size, u16 *data);
+extern int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd,
+ int argc, u16 *argv, int size,
+ u16 *data);
+extern int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd,
+ int argc, u16 *argv);
+
+extern int auok190x_common_probe(struct platform_device *pdev,
+ struct auok190x_init_data *init);
+extern int auok190x_common_remove(struct platform_device *pdev);
+
+extern const struct dev_pm_ops auok190x_pm;
diff --git a/include/video/auo_k190xfb.h b/include/video/auo_k190xfb.h
new file mode 100644
index 0000000..609efe8
--- /dev/null
+++ b/include/video/auo_k190xfb.h
@@ -0,0 +1,106 @@
+/*
+ * Definitions for AUO-K190X framebuffer drivers
+ *
+ * Copyright (C) 2012 Heiko Stuebner <heiko@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_VIDEO_AUO_K190XFB_H_
+#define _LINUX_VIDEO_AUO_K190XFB_H_
+
+/* Controller standby command needs a param */
+#define AUOK190X_QUIRK_STANDBYPARAM (1 << 0)
+
+/* Controller standby is completely broken */
+#define AUOK190X_QUIRK_STANDBYBROKEN (1 << 1)
+
+/*
+ * Resolutions for the displays
+ */
+#define AUOK190X_RESOLUTION_800_600 0
+#define AUOK190X_RESOLUTION_1024_768 1
+
+/*
+ * struct used by auok190x. board specific stuff comes from *board
+ */
+struct auok190xfb_par {
+ struct fb_info *info;
+ struct auok190x_board *board;
+
+ struct regulator *regulator;
+
+ struct mutex io_lock;
+ struct delayed_work work;
+ wait_queue_head_t waitq;
+ int resolution;
+ int rotation;
+ int consecutive_threshold;
+ int update_cnt;
+
+ /* panel and controller informations */
+ int epd_type;
+ int panel_size_int;
+ int panel_size_float;
+ int panel_model;
+ int tcon_version;
+ int lut_version;
+
+ /* individual controller callbacks */
+ void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2);
+ void (*update_all)(struct auok190xfb_par *par);
+ bool (*need_refresh)(struct auok190xfb_par *par);
+ void (*init)(struct auok190xfb_par *par);
+ void (*recover)(struct auok190xfb_par *par);
+
+ int update_mode; /* mode to use for updates */
+ int last_mode; /* update mode last used */
+ int flash;
+
+ /* power management */
+ int autosuspend_delay;
+ bool standby;
+ bool manual_standby;
+};
+
+/**
+ * Board specific platform-data
+ * @init: initialize the controller interface
+ * @cleanup: cleanup the controller interface
+ * @wait_for_rdy: wait until the controller is not busy anymore
+ * @set_ctl: change an interface control
+ * @set_hdb: write a value to the data register
+ * @get_hdb: read a value from the data register
+ * @setup_irq: method to setup the irq handling on the busy gpio
+ * @gpio_nsleep: sleep gpio
+ * @gpio_nrst: reset gpio
+ * @gpio_nbusy: busy gpio
+ * @resolution: one of the AUOK190X_RESOLUTION constants
+ * @rotation: rotation of the framebuffer
+ * @quirks: controller quirks to honor
+ * @fps: frames per second for defio
+ */
+struct auok190x_board {
+ int (*init)(struct auok190xfb_par *);
+ void (*cleanup)(struct auok190xfb_par *);
+ int (*wait_for_rdy)(struct auok190xfb_par *);
+
+ void (*set_ctl)(struct auok190xfb_par *, unsigned char, u8);
+ void (*set_hdb)(struct auok190xfb_par *, u16);
+ u16 (*get_hdb)(struct auok190xfb_par *);
+
+ int (*setup_irq)(struct fb_info *);
+
+ int gpio_nsleep;
+ int gpio_nrst;
+ int gpio_nbusy;
+
+ int resolution;
+ int rotation;
+ int quirks;
+ int fps;
+};
+
+#endif
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
