On Tue, Mar 27, 2012 at 4:13 PM, Tomi Valkeinen <tomi.valkeinen@xxxxxx> wrote:
> Hi,
>
> On Wed, 2012-03-21 at 15:21 +0530, Chandrabhanu Mahapatra wrote:
>> In OMAP3 DISPC video overlays suffer from some undocumented horizontal position
>> and timing related limitations leading to SYNCLOST errors. Whenever the image
>> window is moved towards the right of the screen SYNCLOST errors become
>> frequent. Checks have been implemented to see that DISPC driver rejects
>> configuration exceeding above limitations.
>>
>> This code was successfully tested on OMAP3. This code is written based on code
>> written by Ville Syrjälä <ville.syrjala@xxxxxxxxx> in Linux OMAP kernel. Ville
>> Syrjälä <ville.syrjala@xxxxxxxxx> had added checks for video overlay horizontal
>> timing and DISPC horizontal blanking length limitations.
>>
>> Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
>> ---
>> drivers/video/omap2/dss/dispc.c | 97 +++++++++++++++++++++++++++++----------
>> 1 files changed, 72 insertions(+), 25 deletions(-)
>
> The patch seems to be using dos line endings... Where did they come
> from? The two others are fine. I think git am removed the dos line
> endings, so it's fine.
>
How did you find these errors? scripts/checkpatch.pl still returns me nothing.
> Tomi
>
>
> ERROR: DOS line endings
> #72: FILE: drivers/video/omap2/dss/dispc.c:1625:
> +static int check_horiz_timing(enum omap_channel channel, u16 pos_x,^M$
>
> ERROR: DOS line endings
> #73: FILE: drivers/video/omap2/dss/dispc.c:1626:
> +^I^Iu16 width, u16 height, u16 out_width, u16 out_height)^M$
>
> ERROR: DOS line endings
> #74: FILE: drivers/video/omap2/dss/dispc.c:1627:
> +{^M$
>
> ERROR: DOS line endings
> #75: FILE: drivers/video/omap2/dss/dispc.c:1628:
> +^Iint DS = DIV_ROUND_UP(height, out_height);^M$
>
> ERROR: DOS line endings
> #76: FILE: drivers/video/omap2/dss/dispc.c:1629:
> +^Istruct omap_dss_device *dssdev = dispc_mgr_get_device(channel);^M$
>
> ERROR: DOS line endings
> #77: FILE: drivers/video/omap2/dss/dispc.c:1630:
> +^Istruct omap_video_timings t = dssdev->panel.timings;^M$
>
> ERROR: DOS line endings
> #78: FILE: drivers/video/omap2/dss/dispc.c:1631:
> +^Iunsigned long nonactive, lclk, pclk;^M$
>
> ERROR: DOS line endings
> #79: FILE: drivers/video/omap2/dss/dispc.c:1632:
> +^Istatic const u8 limits[3] = { 8, 10, 20 };^M$
>
> ERROR: DOS line endings
> #80: FILE: drivers/video/omap2/dss/dispc.c:1633:
> +^Iu64 val, blank;^M$
>
> ERROR: DOS line endings
> #81: FILE: drivers/video/omap2/dss/dispc.c:1634:
> +^Iint i;^M$
>
> ERROR: DOS line endings
> #82: FILE: drivers/video/omap2/dss/dispc.c:1635:
> +^M$
>
> ERROR: DOS line endings
> #83: FILE: drivers/video/omap2/dss/dispc.c:1636:
> +^Inonactive = t.x_res + t.hfp + t.hsw + t.hbp - out_width;^M$
>
> ERROR: DOS line endings
> #84: FILE: drivers/video/omap2/dss/dispc.c:1637:
> +^Ipclk = dispc_mgr_pclk_rate(channel);^M$
>
> ERROR: DOS line endings
> #85: FILE: drivers/video/omap2/dss/dispc.c:1638:
> +^Ilclk = dispc_mgr_lclk_rate(channel);^M$
>
> ERROR: DOS line endings
> #86: FILE: drivers/video/omap2/dss/dispc.c:1639:
> +^M$
>
> ERROR: DOS line endings
> #87: FILE: drivers/video/omap2/dss/dispc.c:1640:
> +^Ii = 0;^M$
>
> ERROR: DOS line endings
> #88: FILE: drivers/video/omap2/dss/dispc.c:1641:
> +^Iif (out_height < height)^M$
>
> ERROR: DOS line endings
> #89: FILE: drivers/video/omap2/dss/dispc.c:1642:
> +^I^Ii++;^M$
>
> ERROR: DOS line endings
> #90: FILE: drivers/video/omap2/dss/dispc.c:1643:
> +^Iif (out_width < width)^M$
>
> ERROR: DOS line endings
> #91: FILE: drivers/video/omap2/dss/dispc.c:1644:
> +^I^Ii++;^M$
>
> ERROR: DOS line endings
> #92: FILE: drivers/video/omap2/dss/dispc.c:1645:
> +^Iblank = div_u64((u64)(t.hbp + t.hsw + t.hfp) * lclk, pclk);^M$
>
> ERROR: DOS line endings
> #93: FILE: drivers/video/omap2/dss/dispc.c:1646:
> +^IDSSDBG("blanking period + ppl = %llu (limit = %u)\n", blank,
> limits[i]);^M$
>
> WARNING: line over 80 characters
> #93: FILE: drivers/video/omap2/dss/dispc.c:1646:
> + DSSDBG("blanking period + ppl = %llu (limit = %u)\n", blank,
> limits[i]);
>
> ERROR: DOS line endings
> #94: FILE: drivers/video/omap2/dss/dispc.c:1647:
> +^Iif (blank <= limits[i])^M$
>
> ERROR: DOS line endings
> #95: FILE: drivers/video/omap2/dss/dispc.c:1648:
> +^I^Ireturn -EINVAL;^M$
>
> ERROR: DOS line endings
> #96: FILE: drivers/video/omap2/dss/dispc.c:1649:
> +^M$
>
> ERROR: trailing whitespace
> #97: FILE: drivers/video/omap2/dss/dispc.c:1650:
> +^I/*^M$
>
> ERROR: trailing whitespace
> #98: FILE: drivers/video/omap2/dss/dispc.c:1651:
> +^I * Pixel data should be prepared before visible display point
> starts.^M$
>
> ERROR: trailing whitespace
> #99: FILE: drivers/video/omap2/dss/dispc.c:1652:
> +^I * So, atleast DS-2 lines must have already been fetched by DISPC^M$
>
> ERROR: trailing whitespace
> #100: FILE: drivers/video/omap2/dss/dispc.c:1653:
> +^I * during nonactive - pos_x period.^M$
>
> ERROR: DOS line endings
> #101: FILE: drivers/video/omap2/dss/dispc.c:1654:
> +^I */^M$
>
> ERROR: DOS line endings
> #102: FILE: drivers/video/omap2/dss/dispc.c:1655:
> +^Ival = div_u64((u64)(nonactive - pos_x) * lclk, pclk);^M$
>
> ERROR: DOS line endings
> #103: FILE: drivers/video/omap2/dss/dispc.c:1656:
> +^IDSSDBG("(nonactive - pos_x) * pcd = %llu,"^M$
>
> ERROR: DOS line endings
> #104: FILE: drivers/video/omap2/dss/dispc.c:1657:
> +^I^I" max(0, DS - 2) * width = %d\n",^M$
>
> ERROR: DOS line endings
> #105: FILE: drivers/video/omap2/dss/dispc.c:1658:
> +^I^Ival, max(0, DS - 2) * width);^M$
>
> ERROR: DOS line endings
> #106: FILE: drivers/video/omap2/dss/dispc.c:1659:
> +^Iif (val < max(0, DS - 2) * width)^M$
>
> ERROR: DOS line endings
> #107: FILE: drivers/video/omap2/dss/dispc.c:1660:
> +^I^Ireturn -EINVAL;^M$
>
> ERROR: DOS line endings
> #108: FILE: drivers/video/omap2/dss/dispc.c:1661:
> +^M$
>
> ERROR: trailing whitespace
> #109: FILE: drivers/video/omap2/dss/dispc.c:1662:
> +^I/*^M$
>
> ERROR: trailing whitespace
> #110: FILE: drivers/video/omap2/dss/dispc.c:1663:
> +^I * All lines need to be refilled during the nonactive period of
> which^M$
>
> ERROR: trailing whitespace
> #111: FILE: drivers/video/omap2/dss/dispc.c:1664:
> +^I * only one line can be loaded during the active period. So,
> atleast^M$
>
> ERROR: trailing whitespace
> #112: FILE: drivers/video/omap2/dss/dispc.c:1665:
> +^I * DS - 1 lines should be loaded during nonactive period.^M$
>
> ERROR: DOS line endings
> #113: FILE: drivers/video/omap2/dss/dispc.c:1666:
> +^I */^M$
>
> ERROR: DOS line endings
> #114: FILE: drivers/video/omap2/dss/dispc.c:1667:
> +^Ival = div_u64((u64)nonactive * lclk, pclk);^M$
>
> ERROR: DOS line endings
> #115: FILE: drivers/video/omap2/dss/dispc.c:1668:
> +^IDSSDBG("nonactive * pcd = %llu, max(0, DS - 1) * width = %d\n",^M$
>
> ERROR: DOS line endings
> #116: FILE: drivers/video/omap2/dss/dispc.c:1669:
> +^I^Ival, max(0, DS - 1) * width);^M$
>
> ERROR: DOS line endings
> #117: FILE: drivers/video/omap2/dss/dispc.c:1670:
> +^Iif (val < max(0, DS - 1) * width)^M$
>
> ERROR: DOS line endings
> #118: FILE: drivers/video/omap2/dss/dispc.c:1671:
> +^I^Ireturn -EINVAL;^M$
>
> ERROR: DOS line endings
> #119: FILE: drivers/video/omap2/dss/dispc.c:1672:
> +^M$
>
> ERROR: DOS line endings
> #120: FILE: drivers/video/omap2/dss/dispc.c:1673:
> +^Ireturn 0;^M$
>
> ERROR: DOS line endings
> #121: FILE: drivers/video/omap2/dss/dispc.c:1674:
> +}^M$
>
> ERROR: DOS line endings
> #122: FILE: drivers/video/omap2/dss/dispc.c:1675:
> +^M$
>
> ERROR: DOS line endings
> #131: FILE: drivers/video/omap2/dss/dispc.c:1756:
> +^I^Iint *x_predecim, int *y_predecim, u16 pos_x)^M$
>
> ERROR: DOS line endings
> #139: FILE: drivers/video/omap2/dss/dispc.c:1832:
> +^I^I^Ierror = check_horiz_timing(channel, pos_x, in_width,^M$
>
> ERROR: DOS line endings
> #140: FILE: drivers/video/omap2/dss/dispc.c:1833:
> +^I^I^I^Iin_height, out_width, out_height);^M$
>
> ERROR: DOS line endings
> #141: FILE: drivers/video/omap2/dss/dispc.c:1834:
> +^M$
>
> ERROR: DOS line endings
> #150: FILE: drivers/video/omap2/dss/dispc.c:1842:
> +^I^I^Ierror = (error || in_width > maxsinglelinewidth * 2 ||^M$
>
> ERROR: DOS line endings
> #158: FILE: drivers/video/omap2/dss/dispc.c:1858:
> +^I^Iif (check_horiz_timing(channel, pos_x, width, height,^M$
>
> ERROR: DOS line endings
> #159: FILE: drivers/video/omap2/dss/dispc.c:1859:
> +^I^I^Iout_width, out_height)){^M$
>
> ERROR: DOS line endings
> #160: FILE: drivers/video/omap2/dss/dispc.c:1860:
> +^I^I^I^IDSSERR("horizontal timing too tight\n");^M$
>
> ERROR: DOS line endings
> #161: FILE: drivers/video/omap2/dss/dispc.c:1861:
> +^I^I^I^Ireturn -EINVAL;^M$
>
> ERROR: DOS line endings
> #162: FILE: drivers/video/omap2/dss/dispc.c:1862:
> +^I^I}^M$
>
> ERROR: DOS line endings
> #163: FILE: drivers/video/omap2/dss/dispc.c:1863:
> +^M$
>
> ERROR: DOS line endings
> #172: FILE: drivers/video/omap2/dss/dispc.c:1964:
> +^I^I^I&x_predecim, &y_predecim, oi->pos_x);^M$
>
> ERROR: DOS line endings
> #184: FILE: drivers/video/omap2/dss/dispc.c:2535:
> +^Iunsigned long r = dispc_fclk_rate();^M$
>
> ERROR: DOS line endings
> #187: FILE: drivers/video/omap2/dss/dispc.c:2537:
> +^Iif (dispc_mgr_is_lcd(channel)) {^M$
>
> ERROR: DOS line endings
> #188: FILE: drivers/video/omap2/dss/dispc.c:2538:
> +^I^Iu32 l;^M$
>
> ERROR: DOS line endings
> #189: FILE: drivers/video/omap2/dss/dispc.c:2539:
> +^I^Iint lcd;^M$
>
> ERROR: DOS line endings
> #192: FILE: drivers/video/omap2/dss/dispc.c:2541:
> +^I^Il = dispc_read_reg(DISPC_DIVISORo(channel));^M$
>
> ERROR: DOS line endings
> #193: FILE: drivers/video/omap2/dss/dispc.c:2542:
> +^I^Ilcd = FLD_GET(l, 23, 16);^M$
>
> ERROR: DOS line endings
> #209: FILE: drivers/video/omap2/dss/dispc.c:2544:
> +^I^Ireturn r / lcd;^M$
>
> ERROR: DOS line endings
> #210: FILE: drivers/video/omap2/dss/dispc.c:2545:
> +^I} else {^M$
>
> ERROR: DOS line endings
> #211: FILE: drivers/video/omap2/dss/dispc.c:2546:
> +^I^Ireturn r;^M$
>
> total: 72 errors, 1 warnings, 143 lines checked
>
> NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch
> or
> scripts/cleanfile
>
> 123.mbox has style problems, please review.
>
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
>
--
Chandrabhanu Mahapatra
Texas Instruments India Pvt. Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
