[PATCH 2/2] fbdev: da8xx: add support for SP10Q010 display

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add timing data for Hitachi SP10Q010 display and allow configuration
of the 4bpp palette. For 4bpp framebuffer enable reversed order of
pixels in a byte. This requires defining FB_CFB_REV_PIXELS_IN_BYTE
and additionally setting var.nonstd to the value FB_NONSTD_REV_PIX_IN_B.
Note that it is not enough to set da8xx_fb_var.nonstd to this value
statically, since FBIOPUT_VSCREENINFO ioctl might pass var struct with
.nonstd field set to zero or another value. Therefore this setting must
be adjusted in fb_check_var() according to the requested bpp value.

Signed-off-by: Anatolij Gustschin <agust@xxxxxxx>
Cc: Manjunathappa, Prakash <prakash.pm@xxxxxx>
---
 drivers/video/Kconfig    |    1 +
 drivers/video/da8xx-fb.c |   38 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 38 insertions(+), 1 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6ca0c40..ce09b17 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2233,6 +2233,7 @@ config FB_DA8XX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_CFB_REV_PIXELS_IN_BYTE
 	---help---
 	  This is the frame buffer device driver for the TI LCD controller
 	  found on DA8xx/OMAP-L1xx SoCs.
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 27c2794..0a382ed 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -238,6 +238,20 @@ static struct da8xx_panel known_lcd_panels[] = {
 		.pxl_clk = 7833600,
 		.invert_pxl_clk = 0,
 	},
+	[2] = {
+		/* Hitachi SP10Q010 */
+		.name = "SP10Q010",
+		.width = 320,
+		.height = 240,
+		.hfp = 10,
+		.hbp = 10,
+		.hsw = 10,
+		.vfp = 10,
+		.vbp = 10,
+		.vsw = 10,
+		.pxl_clk = 7833600,
+		.invert_pxl_clk = 0,
+	},
 };
 
 static inline unsigned long hz_to_ps(unsigned long hz_val)
@@ -554,7 +568,26 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
 		return 1;
 
-	if (info->var.bits_per_pixel == 8) {
+	if (info->var.bits_per_pixel == 4) {
+		if (regno > 15)
+			return 1;
+
+		if (info->var.grayscale) {
+			pal = regno;
+		} else {
+			red >>= 4;
+			green >>= 8;
+			blue >>= 12;
+
+			pal = (red & 0x0f00);
+			pal |= (green & 0x00f0);
+			pal |= (blue & 0x000f);
+		}
+		if (regno == 0)
+			pal |= 0x2000;
+		palette[regno] = pal;
+
+	} else if (info->var.bits_per_pixel == 8) {
 		red >>= 4;
 		green >>= 8;
 		blue >>= 12;
@@ -809,6 +842,7 @@ static int fb_check_var(struct fb_var_screeninfo *var,
 		var->blue.length = 8;
 		var->transp.offset = 0;
 		var->transp.length = 0;
+		var->nonstd = 0;
 		break;
 	case 4:
 		var->red.offset = 0;
@@ -819,6 +853,7 @@ static int fb_check_var(struct fb_var_screeninfo *var,
 		var->blue.length = 4;
 		var->transp.offset = 0;
 		var->transp.length = 0;
+		var->nonstd = FB_NONSTD_REV_PIX_IN_B;
 		break;
 	case 16:		/* RGB 565 */
 		var->red.offset = 11;
@@ -829,6 +864,7 @@ static int fb_check_var(struct fb_var_screeninfo *var,
 		var->blue.length = 5;
 		var->transp.offset = 0;
 		var->transp.length = 0;
+		var->nonstd = 0;
 		break;
 	default:
 		err = -EINVAL;
-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Video for Linux]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Tourism]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux