Hi Florian,
Here are two major fixes for OMAP DSS driver.
The first (OMAPDSS: use sync versions...) fixes problem with system
suspend, which causes omapdss power management to give WARNs and
generally malfunction on system suspend/resume.
The second (the rest of the patches) implements a workaround for HW bug,
which causes physical damage to the board if the HDMI cable is
disconnected at a "wrong" time. The actual fix is in the last patch, but
the board files needed some cleanups and a new GPIO, which is what the
smaller patches do.
The branch is based on fbdev/fbdev-next. Is that ok?
Tomi
The following changes since commit f787f32e67e00b072f46b2ae3c454d2c0a1fcdb7:
module_param: make bool parameters really bool (drivers/video/i810) (2012-01-12 23:28:59 +0000)
are available in the git repository at:
git://gitorious.org/linux-omap-dss2/linux.git for-3.3-rc
Tomi Valkeinen (7):
OMAPDSS: use sync versions of pm_runtime_put
OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios
OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD
OMAPDSS: remove wrong HDMI HPD muxing
OMAP: 4430SDP/Panda: setup HDMI GPIO muxes
OMAP: 4430SDP/Panda: add HDMI HPD gpio
OMAPDSS: HDMI: PHY burnout fix
arch/arm/mach-omap2/board-4430sdp.c | 18 ++++++--
arch/arm/mach-omap2/board-omap4panda.c | 18 ++++++--
arch/arm/mach-omap2/display.c | 4 --
drivers/video/omap2/dss/dispc.c | 2 +-
drivers/video/omap2/dss/dsi.c | 2 +-
drivers/video/omap2/dss/dss.c | 2 +-
drivers/video/omap2/dss/hdmi.c | 5 ++-
drivers/video/omap2/dss/rfbi.c | 2 +-
drivers/video/omap2/dss/ti_hdmi.h | 4 ++
drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 68 +++++++++++++++++++++++++++--
drivers/video/omap2/dss/venc.c | 2 +-
include/video/omapdss.h | 5 ++
12 files changed, 110 insertions(+), 22 deletions(-)
Attachment:
signature.asc
Description: This is a digitally signed message part
