>>>>> "Peter" == Peter Korsgaard <jacmet@xxxxxxxxxx> writes:
Peter> Allow framebuffer to be configured in 16bit mode when panel is
Peter> wired in (the default) BGR configuration, and don't claim to
Peter> support 15bit input modes, which the LCD controller cannot
Peter> handle.
Ping? Nicolas, you added it to your at91-lcd branch - But it doesn't seem
to have gone any further.
Peter> Signed-off-by: Peter Korsgaard <jacmet@xxxxxxxxxx>
Peter> ---
Peter> drivers/video/atmel_lcdfb.c | 12 +++---------
Peter> 1 files changed, 3 insertions(+), 9 deletions(-)
Peter> diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
Peter> index 7ca3eaf..143f6d9 100644
Peter> --- a/drivers/video/atmel_lcdfb.c
Peter> +++ b/drivers/video/atmel_lcdfb.c
Peter> @@ -418,24 +418,18 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
var-> red.length = var->green.length = var->blue.length
Peter> = var->bits_per_pixel;
Peter> break;
Peter> - case 15:
Peter> case 16:
Peter> if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
Peter> /* RGB:565 mode */
var-> red.offset = 11;
var-> blue.offset = 0;
Peter> - var->green.length = 6;
Peter> - } else if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB555) {
Peter> - var->red.offset = 10;
Peter> - var->blue.offset = 0;
Peter> - var->green.length = 5;
Peter> } else {
Peter> - /* BGR:555 mode */
Peter> + /* BGR:565 mode */
var-> red.offset = 0;
Peter> - var->blue.offset = 10;
Peter> - var->green.length = 5;
Peter> + var->blue.offset = 11;
Peter> }
var-> green.offset = 5;
Peter> + var->green.length = 6;
var-> red.length = var->blue.length = 5;
Peter> break;
Peter> case 32:
Peter> --
Peter> 1.7.6.3
--
Bye, Peter Korsgaard
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
