LCDC functional clock may or may not be derived from CPU/MPU DPLL,
For example,
AM335x => Separate independent DPLL for LCDC
Davinci => Same DPLL as MPU
So, on platforms where LCDC functional clock is not derived from CPU/MPU
PLL it is not required to reset LCDC module, if CPU frequency does not
change with DVFS.
This patch adds check to do reset only if functional clock changes
between pre and post notifier callbacks with DVFS.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@xxxxxx>
---
drivers/video/da8xx-fb.c | 13 ++++++++-----
1 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 29577bf..1334a68 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -161,6 +161,7 @@ struct da8xx_fb_par {
int vsync_timeout;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
+ unsigned int lcd_fck_rate;
#endif
void (*panel_power_ctrl)(int);
};
@@ -840,11 +841,12 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb,
struct da8xx_fb_par *par;
par = container_of(nb, struct da8xx_fb_par, freq_transition);
- if (val == CPUFREQ_PRECHANGE) {
- lcd_disable_raster();
- } else if (val == CPUFREQ_POSTCHANGE) {
- lcd_calc_clk_divider(par);
- lcd_enable_raster();
+ if (val == CPUFREQ_POSTCHANGE) {
+ if (par->lcd_fck_rate != clk_get_rate(par->lcdc_clk)) {
+ lcd_disable_raster();
+ lcd_calc_clk_divider(par);
+ lcd_enable_raster();
+ }
}
return 0;
@@ -1137,6 +1139,7 @@ static int __devinit fb_probe(struct platform_device *device)
par = da8xx_fb_info->par;
par->lcdc_clk = fb_clk;
+ par->lcd_fck_rate = clk_get_rate(fb_clk);
par->pxl_clk = lcdc_info->pxl_clk;
if (fb_pdata->panel_power_ctrl) {
par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
