On Tue, Dec 20, 2011 at 12:47:35PM +0900, Donghwa Lee wrote: > > Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI > based LCD Panel could be used with it. This patch supports MIPI-DSI driver > based Samsung SoC chip. > > LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at > machine code and LCD panel driver specific function registered to mipi_dsim_ddi > structure at lcd panel init function called system init. > In the MIPI-DSI driver, find lcd panel driver by using registered > lcd panel name, and then initialize lcd panel driver. > > Changes since v2: > - support regulators control in the driver. > - avoid type casting and use array to read easily in data write > function. > - etc. > > Signed-off-by: Donghwa Lee <dh09.lee@xxxxxxxxxxx> > Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx> > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > --- > drivers/video/Kconfig | 7 + > drivers/video/Makefile | 2 + > drivers/video/s5p_mipi_dsi.c | 619 ++++++++++++++++++++++ > drivers/video/s5p_mipi_dsi_common.c | 902 +++++++++++++++++++++++++++++++++ > drivers/video/s5p_mipi_dsi_common.h | 46 ++ > drivers/video/s5p_mipi_dsi_lowlevel.c | 627 +++++++++++++++++++++++ > drivers/video/s5p_mipi_dsi_lowlevel.h | 112 ++++ > drivers/video/s5p_mipi_dsi_regs.h | 156 ++++++ > include/linux/mipi_dsim.h | 361 +++++++++++++ > 9 files changed, 2832 insertions(+), 0 deletions(-) > create mode 100644 drivers/video/s5p_mipi_dsi.c > create mode 100644 drivers/video/s5p_mipi_dsi_common.c > create mode 100644 drivers/video/s5p_mipi_dsi_common.h > create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.c > create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.h > create mode 100644 drivers/video/s5p_mipi_dsi_regs.h > create mode 100644 include/linux/mipi_dsim.h > > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index d83e967..879177b 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -2082,6 +2082,13 @@ config FB_S3C2410_DEBUG > Turn on debugging messages. Note that you can set/unset at run time > through sysfs > > +config S5P_MIPI_DSI > + tristate "Samsung SoC MIPI-DSI support." > + depends on FB_S3C && (ARCH_S5PV210 || ARCH_S5PV310 || ARCH_EXYNOS) > + default n default n is the default default, so there's no point explicltly specifying the default default default. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
