The standard timings parses uses 1:1 dimensions when the ratio in the
EDID data is 0. However, for EDID 1.3 and later the dimensions are 16:10
when the ratio is 0.
Pass the version and revision numbers to get_std_timing() which can then
make the right decision about dimensions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/fbmon.c | 20 ++++++++++++++------
1 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 4f57485..6a6f92e 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -493,7 +493,8 @@ static int get_est_timing(unsigned char *block, struct fb_videomode *mode)
return num;
}
-static int get_std_timing(unsigned char *block, struct fb_videomode *mode)
+static int get_std_timing(unsigned char *block, struct fb_videomode *mode,
+ int ver, int rev)
{
int xres, yres = 0, refresh, ratio, i;
@@ -504,7 +505,10 @@ static int get_std_timing(unsigned char *block, struct fb_videomode *mode)
ratio = (block[1] & 0xc0) >> 6;
switch (ratio) {
case 0:
- yres = xres;
+ if (ver < 1 || (ver == 1 && rev < 3))
+ yres = xres;
+ else
+ yres = (xres * 10)/16;
break;
case 1:
yres = (xres * 3)/4;
@@ -533,12 +537,12 @@ static int get_std_timing(unsigned char *block, struct fb_videomode *mode)
}
static int get_dst_timing(unsigned char *block,
- struct fb_videomode *mode)
+ struct fb_videomode *mode, int ver, int rev)
{
int j, num = 0;
for (j = 0; j < 6; j++, block += STD_TIMING_DESCRIPTION_SIZE)
- num += get_std_timing(block, &mode[num]);
+ num += get_std_timing(block, &mode[num], ver, rev);
return num;
}
@@ -599,6 +603,10 @@ static struct fb_videomode *fb_create_modedb(unsigned char *edid, int *dbsize)
struct fb_videomode *mode, *m;
unsigned char *block;
int num = 0, i, first = 1;
+ int ver, rev;
+
+ ver = edid[EDID_STRUCT_VERSION];
+ rev = edid[EDID_STRUCT_REVISION];
mode = kzalloc(50 * sizeof(struct fb_videomode), GFP_KERNEL);
if (mode == NULL)
@@ -632,12 +640,12 @@ static struct fb_videomode *fb_create_modedb(unsigned char *edid, int *dbsize)
DPRINTK(" Standard Timings\n");
block = edid + STD_TIMING_DESCRIPTIONS_START;
for (i = 0; i < STD_TIMING; i++, block += STD_TIMING_DESCRIPTION_SIZE)
- num += get_std_timing(block, &mode[num]);
+ num += get_std_timing(block, &mode[num], ver, rev);
block = edid + DETAILED_TIMING_DESCRIPTIONS_START;
for (i = 0; i < 4; i++, block+= DETAILED_TIMING_DESCRIPTION_SIZE) {
if (block[0] == 0x00 && block[1] == 0x00 && block[3] == 0xfa)
- num += get_dst_timing(block + 5, &mode[num]);
+ num += get_dst_timing(block + 5, &mode[num], ver, rev);
}
/* Yikes, EDID data is totally useless */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
