On Fri, 2011-06-10 at 13:28 +0200, Peter Zijlstra wrote: > On Thu, 2011-06-09 at 16:57 -0700, Hugh Dickins wrote: > > > > All console-related activity curently happens under spin_lock_irqsave(&console_lock). > > This causes interrutps to be blocked for 1-2 milliseconds with vgacon, and for > > hundreds of milliseconds with fbdevs. This results in network overruns, audio > > dropouts, dropped characters on serial ports and other such nice things. > > Hmm, with these proposed patches we're actually back to that. I wonder > if fbdev is still that crappy.. So I tried adding a fbcon to my test box (not that it actually has a display, but who cares) and disabled lockdep (otherwise that's all I can catch on the latency tracer) to see if I could see whopping horrid latencies there, but I'm afraid I either failed to set things up properly or my fbcon isn't sucky enough. What I did was enable: CONFIG_FB=y CONFIG_FB_SIS=y CONFIG_FB_SIS_315=y (the board has XGI z7) and CONFIG_FRAMEBUFFER_CONSOLE=y And used: debug ignore_loglevel sysrq_always_enabled console=tty0 console=ttyS0,115200 earlyprintk=serial,ttyS0,115200 thinking that that would have my printk stmts appear on both the fbcon as well as the serial line. But they fail to appear on the latency tracer (current max was 165us waking an idle cpu). Paul (and fellow fbcon folks), was my setup above correct, and what's the current status of suckyness wrt fbcon output? The idea is to keep IRQs disabled over all of printk() including the con->write() calls, Andrew seems to be responsible removing that in the early 2.4 time-frame due to some consoles being waaay crap and taking like hundreds of ms to write things out, can that still happen or has stuff improved and is using background flusher threads to write to slow devices? -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
