Add dsi_mux_pads function pointer to omap_dss_board_info, and use the
function pointer in DSI code to configure the DSI pads either to normal
DSI operation, or to pull down when in ULPS.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/plat-omap/include/plat/display.h | 1 +
drivers/video/omap2/dss/dsi.c | 15 +++++++++++++++
2 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index a65479c..bd0f08e 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -235,6 +235,7 @@ struct omap_dss_board_info {
int num_devices;
struct omap_dss_device **devices;
struct omap_dss_device *default_device;
+ void (*dsi_mux_pads)(bool enable);
};
#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d15014e..f1e14ca 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -244,6 +244,8 @@ static struct
void __iomem *base;
int irq;
+ void (*dsi_mux_pads)(bool enable);
+
struct dsi_clock_info current_cinfo;
bool vdds_dsi_enabled;
@@ -2035,6 +2037,9 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
DSSDBGF();
+ if (dsi.dsi_mux_pads)
+ dsi.dsi_mux_pads(true);
+
dsi_enable_scp_clk();
/* A dummy read using the SCP interface to any DSIPHY register is
@@ -2122,6 +2127,8 @@ err_cio_pwr:
dsi_cio_disable_lane_override();
err_scp_clk_dom:
dsi_disable_scp_clk();
+ if (dsi.dsi_mux_pads)
+ dsi.dsi_mux_pads(false);
return r;
}
@@ -2129,6 +2136,8 @@ static void dsi_cio_uninit(void)
{
dsi_cio_power(DSI_COMPLEXIO_POWER_OFF);
dsi_disable_scp_clk();
+ if (dsi.dsi_mux_pads)
+ dsi.dsi_mux_pads(false);
}
static int _dsi_wait_reset(void)
@@ -3993,10 +4002,16 @@ static void dsi_calc_clock_param_ranges(void)
static int dsi_init(struct platform_device *pdev)
{
+ struct omap_display_platform_data *dss_plat_data;
+ struct omap_dss_board_info *board_info;
u32 rev;
int r, i;
struct resource *dsi_mem;
+ dss_plat_data = pdev->dev.platform_data;
+ board_info = dss_plat_data->board_data;
+ dsi.dsi_mux_pads = board_info->dsi_mux_pads;
+
spin_lock_init(&dsi.irq_lock);
spin_lock_init(&dsi.errors_lock);
dsi.errors = 0;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
